Skip to the content
123456

TLV62568ADRL

Texas InstrumentsExtended

-40℃~+125℃@(TJ) 1 1.5MHz 1A 2.5V~5.5V 600mV~5.5V Adjustable Buck Buck Built-in Yes SOT-563 DC-DC Converters ROHS

Part id
ti/TLV62568ADRL
Category
DC DC Converters
Package
SOT-563
Pins
6
In stock
1,497 at JLCPCB (C398372)
Used on
4 open-source boards

Overview

The TLV62568ADRL is a DC DC Converter made by Texas Instruments in a SOT-563 package with 6 pins. -40℃~+125℃@(TJ) 1 1.5MHz 1A 2.5V~5.5V 600mV~5.5V Adjustable Buck Buck Built-in Yes SOT-563 DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (Regulator_Switching:TLV62568ADRL, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-563, from KiCad's library), ready for a KiCad board. 1,497 are in stock at JLCPCB (part C398372). 4 open-source boards in 4 repositories on GitHub use it.

Symbol

1FB2GND3VIN4SW5EN
Regulator_Switching:TLV62568ADRLFrom KiCad's library

Footprint

123456
Package_TO_SOT_SMD:SOT-563From KiCad's library

From the datasheet

14
Supply, least
2.5 V · VIN, recommended operating min · p. 4
Supply, most
5.5 V · VIN, recommended operating max · p. 4
Supply, absolute maximum
6 V · VIN, absolute max · p. 3
Junction, hottest
150 °C · junction temperature, absolute max · p. 3
Gives
1 A · TLV62568ADRL rated continuous output max · p. 1
Takes asleep
10 nA · VIN shutdown current typical, EN = 0 V · p. 4
Feedback reference
600 mV · feedback regulation voltage typical · p. 5
Current limit
2 A · high-side FET current limit min, TLV62568A · p. 5
Switches at
1.5 MHz · switching frequency typical · p. 5
Junction to air (JEDEC (DRL))
142.8 K/W · junction-to-ambient, JEDEC board · p. 4
Junction to air (EVM (DRL))
124.8 K/W · junction-to-ambient, EVM board · p. 4
Junction to case (JEDEC (DRL))
51.1 K/W · junction-to-case top, JEDEC board · p. 4
Junction to board (JEDEC (DRL))
28.9 K/W · junction-to-board, JEDEC board · p. 4
Junction to board (EVM (DRL))
23.1 K/W · junction-to-board characterization parameter, EVM board · p. 4

What it is and has

8
Operating mode
Forced PWM · p. 1
Efficiency
Up to 95% · p. 1
Adjustable output voltage
0.6 V to VIN · p. 1
Duty cycle
100%, low dropout operation · p. 1
Protection
Overcurrent protection · p. 1
Soft start
Internal · p. 1
Protection
Thermal shutdown · p. 1
Package
SOT563 · p. 1

Around it

4
cap 4.7-μF
between VIN and GND; Input capacitor; low ESR multilayer ceramic recommended; sufficient for most applications. · p. 10
cap 22 µF to 47 µF
between VOUT and GND; Output capacitor; ceramic with low ESR; X7T or X5R dielectric recommended. · p. 10
res 200 kΩ maximum
between FB and GND; R2, lower feedback divider resistor. · p. 9
cap 10-pF
between VOUT and FB; C3 feed forward capacitor, recommended when R2 is 100 kΩ. · p. 9

Specifications

33
ParameterConditionsAs printedPage
VoltageVIN, EN, PG; over operating temperature rangemin -0.3 · max 6 V3
VoltageSW (DC); maximum is VIN + 0.3 Vmin -0.3 V3
VoltageSW (AC, less than 10ns); while switchingmin -3 · max 9 V3
VoltageFBmin -0.3 · max 3 V3
Junction temperature TJmin -40 · max 150 °C3
Storage temperature Tstgmin -65 · max 150 °C3
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins; rating ±2000 Vmax 2000 V3
Electrostatic discharge V(ESD)Charged device model (CDM), per JEDEC specification JESD22-C101, all pins; rating ±500 Vmax 500 V3
Input voltage VINOver operating free-air temperature rangemin 2.5 · max 5.5 V4
Output voltage VOUTMaximum is VINmin 0.6 V4
Junction temperature TJmin -40 · max 125 °C4
Junction-to-ambient thermal resistance RθJATLV62568Ax; JEDEC (DRL), 6 PINStyp 142.8 °C/W4
Junction-to-ambient thermal resistance RθJATLV62568Ax; EVM (DRL), 6 PINStyp 124.8 °C/W4
Junction-to-case (top) thermal resistance RθJC(top)TLV62568Ax; JEDEC (DRL), 6 PINStyp 51.1 °C/W4
Junction-to-board thermal resistance RθJBTLV62568Ax; JEDEC (DRL), 6 PINStyp 28.9 °C/W4
Junction-to-top characterization parameter ΨJTTLV62568Ax; JEDEC (DRL), 6 PINStyp 1.4 °C/W4
Junction-to-top characterization parameter ΨJTTLV62568Ax; EVM (DRL), 6 PINStyp 1.6 °C/W4
Junction-to-board characterization parameter ΨJBTLV62568Ax; JEDEC (DRL), 6 PINStyp 28.7 °C/W4
Junction-to-board characterization parameter ΨJBTLV62568Ax; EVM (DRL), 6 PINStyp 23.1 °C/W4
Shutdown current into VIN pin ISDVIN = 5.0 V, TJ = 25 °C; EN = 0 Vtyp 0.01 · max 2 uA4
Under voltage lock out VUVLOVIN falling; TJ = 25 °Ctyp 2.3 · max 2.45 V4
under voltage lock out hysteresis VUVLOTJ = 25 °Ctyp 100 mV4
Thermal shutdown TJSDVIN = 5.0 V; TJ risingtyp 150 °C4
Thermal shutdown TJSDVIN = 5.0 V; TJ fallingtyp 130 °C4
High-level input voltage at EN pin VIH2.5 ≤ VIN ≤ 5.5; TJ = 25 °Cmin 1.2 V4
Low-level input voltage at EN pin VIL2.5 ≤ VIN ≤ 5.5; TJ = 25 °Cmax 0.4 V4
Soft startup time tSSVIN = 5.0 V, TJ = 25 °C; From EN high to 95% of VOUT nominaltyp 0.9 ms4
Feedback regulation voltage VFBVIN = 5.0 V, TJ = 25 °Cmin 0.588 · typ 0.6 · max 0.612 V5
Input leakage current into FB pin IFBVIN = 5.0 V, TJ = 25 °C; VFB = 0.6 Vtyp 10 nA5
High-side FET on resistance RDS(on)VIN = 5.0 V, TJ = 25 °Ctyp 100 mΩ5
Low-side FET on resistance RDS(on)VIN = 5.0 V, TJ = 25 °Ctyp 60 mΩ5
High-side FET current limit ILIMTLV62568A; VIN = 5.0 V, TJ = 25 °Cmin 2 A5
Switching frequency fSWVIN = 5.0 V, TJ = 25 °Ctyp 1.5 MHz5

Pins, by the datasheet

5
1 FB
Feedback for the internal control loop; connect to an external feedback divider. · p. 3
2 GND
Ground pin. · p. 3
3 VIN
Power supply voltage input. · p. 3
4 SW
Switch node connected to the internal FET switches; connect the output filter inductor here. · p. 3
5 EN
High enables the device; low disables it into shutdown; do not leave floating. · p. 3

Open-source boards using it

4
  • 4 layers100 × 70.5 mmSmart Irrigation SystemV2, the printed circuit board in 3D

    Smart Irrigation SystemV2

    Benedikt3141/Smart-Irrigation-System

    A smart irrigation system for irrigation of up to 6 plants. It monitors the moisture, temperature, CO2 concentration, air quality ... and displays the data on a 2.4" TFT Display using an ESP32 DevKit C as processor.

    147 parts1MIT
  • 4 layers48.8 × 55.3 mmFPGA Lockin, the printed circuit board in 3D

    FPGA Lockin

    Cstubbs56/FPGA-Lockin-Amplifier-PCB

    129 parts
  • 2 layers189.1 × 78.7 mmFront, the printed circuit board in 3D

    Front

    engr110-2026-obstacle-detector/pcb

    work in progress

    46 parts
  • 4 layers85 × 41 mmGateway PCB v2, the printed circuit board in 3D

    Gateway PCB v2

    LThakdanai/LoRaWAN-Gateway-v2

    113 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TLV62568ADRL?

Yes. The symbol is Regulator_Switching:TLV62568ADRL and the footprint Package_TO_SOT_SMD:SOT-563, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TLV62568ADRL?

SOT-563, with 6 pins. Its footprint is drawn on this page.

Where is the TLV62568ADRL datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TLV62568ADRL?

JLCPCB lists it as part C398372, with 1,497 in stock; the sellers' links on this page open their listings.

What can replace the TLV62568ADRL?

Parts like it in the library: the TPS61023DRL by Texas Instruments, the TPS564247DRL by Texas Instruments, the TLV62569ADRL by Texas Instruments and the TLV62585PDRL by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TLV62568ADRL?

4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.