Skip to the content
123456

TLV62569ADRL

Texas InstrumentsExtended

-40℃~+125℃@(TJ) 1 1.5MHz 2.5V~5.5V 2A 600mV~5.5V Adjustable Buck Built-in Overcurrent Protection Step-down type Yes SOT-563 DC-DC Converters ROHS

Part id
ti/TLV62569ADRL
Category
DC DC Converters
Package
SOT-563
Pins
6
In stock
10,783 at JLCPCB (C398367)
Used on
7 open-source boards

Overview

The TLV62569ADRL is a DC DC Converter made by Texas Instruments in a SOT-563 package with 6 pins. -40℃~+125℃@(TJ) 1 1.5MHz 2.5V~5.5V 2A 600mV~5.5V Adjustable Buck Built-in Overcurrent Protection Step-down type Yes SOT-563 DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (Regulator_Switching:TLV62569ADRL, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-563, from KiCad's library), ready for a KiCad board. 10,783 are in stock at JLCPCB (part C398367). 7 open-source boards in 6 repositories on GitHub use it.

Symbol

1FB2GND3VIN4SW5EN
Regulator_Switching:TLV62569ADRLFrom KiCad's library

Footprint

123456
Package_TO_SOT_SMD:SOT-563From KiCad's library

From the datasheet

14
Supply, least
2.5 V · VIN, recommended operating min · p. 4
Supply, most
5.5 V · VIN, recommended operating max · p. 4
Supply, absolute maximum
6 V · VIN, absolute max · p. 3
Junction, hottest
150 °C · Junction temperature, absolute max · p. 3
Takes asleep
10 nA · VIN shutdown current, EN = 0 V, typical · p. 4
Gives
2 A · Continuous output current max · p. 4
Current limit
3 A · High-side FET current limit, TLV62569A, min · p. 5
Feedback reference
600 mV · FB feedback regulation voltage, typical · p. 5
Switches at
1.5 MHz · Switching frequency, typical · p. 5
Junction to air (JEDEC (DRL))
142.8 K/W · Junction-to-ambient thermal resistance, JEDEC · p. 4
Junction to air (EVM (DRL))
124.8 K/W · Junction-to-ambient thermal resistance, EVM · p. 4
Junction to case (JEDEC (DRL))
51.1 K/W · Junction-to-case top thermal resistance, JEDEC · p. 4
Junction to board (JEDEC (DRL))
28.9 K/W · Junction-to-board thermal resistance, JEDEC · p. 4
Junction to board (EVM (DRL))
23.1 K/W · Junction-to-board characterization parameter ΨJB, EVM · p. 4

What it is and has

9
Control mode
Forced PWM · p. 1
Efficiency
Up to 95% · p. 1
Output voltage
Adjustable from 0.6 V to VIN · p. 1
Duty cycle
100% · p. 1
Protection
Over current protection · p. 1
Startup
Internal soft startup · p. 1
Protection
Thermal shutdown · p. 1
Package
SOT563 · p. 1
Control mode
Forced PWM to reduce output voltage ripple · p. 1

Around it

6
cap 4.7 µF
between VIN and GND; C1 in the typical application; ceramic, 10 V, X7R, size 0805. · p. 8
cap 22 µF
between VOUT and GND; C2 in the typical application; ceramic, 6.3 V, X7T, size 0805. · p. 8
ind 1.0 µH
between SW and VOUT; L1 in the typical application; XAL4020-102ME, size 4mmx4mm. · p. 8
res 200 k
between VOUT and FB; R1 in the 1.8-V output example. · p. 8
res 100 k
between FB and GND; R2 in the 1.8-V output example. · p. 8
cap 10 pF
between VOUT and FB; Optional feed forward capacitor C3; recommended for R2 = 100 kΩ to improve transient response. · p. 8

Specifications

34
ParameterConditionsAs printedPage
VoltageVIN, EN; relative to groundmin -0.3 · max 6 V3
VoltageSW (DC); maximum VIN + 0.3 Vmin -0.3 V3
VoltageSW (AC, less than 10ns), while switchingmin -3 · max 9 V3
VoltageFBmin -0.3 · max 3 V3
Junction temperature TJmin -40 · max 150 °C3
Storage temperature Tstgmin -65 · max 150 °C3
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins; ±2000 Vmax 2000 V3
Electrostatic discharge V(ESD)Charged device model (CDM), per JEDEC specification JESD22-C101, all pins; ±500 Vmax 500 V3
Input voltage VINmin 2.5 · max 5.5 V4
Output voltage VOUTMaximum VINmin 0.6 V4
Output current IOUTmin 0 · max 2 A4
Junction temperature TJmin -40 · max 125 °C4
Junction-to-ambient thermal resistance RθJAJEDEC (DRL), 6 pinstyp 142.8 °C/W4
Junction-to-ambient thermal resistance RθJAEVM (DRL), 6 pinstyp 124.8 °C/W4
Junction-to-case (top) thermal resistance RθJC(top)JEDEC (DRL), 6 pinstyp 51.1 °C/W4
Junction-to-board thermal resistance RθJBJEDEC (DRL), 6 pinstyp 28.9 °C/W4
Junction-to-top characterization parameter ΨJTJEDEC (DRL), 6 pinstyp 1.4 °C/W4
Junction-to-top characterization parameter ΨJTEVM (DRL), 6 pinstyp 1.6 °C/W4
Junction-to-board characterization parameter ΨJBJEDEC (DRL), 6 pinstyp 28.7 °C/W4
Junction-to-board characterization parameter ΨJBEVM (DRL), 6 pinstyp 23.1 °C/W4
Shutdown current into VIN pin ISDVIN = 5.0 V, TJ = 25 °C, EN = 0 Vtyp 0.01 · max 2 uA4
Under voltage lock out VUVLOVIN falling, TJ = 25 °Ctyp 2.3 · max 2.45 V4
under voltage lock out hysteresis VUVLOTJ = 25 °Ctyp 100 mV4
Thermal shutdown TJSDVIN = 5.0 V, TJ risingtyp 150 °C4
Thermal shutdown TJSDVIN = 5.0 V, TJ fallingtyp 130 °C4
High-level input voltage at EN pin VIH2.5 ≤ VIN ≤ 5.5, TJ = 25 °Cmin 1.2 V4
Low-level input voltage at EN pin VIL2.5 ≤ VIN ≤ 5.5, TJ = 25 °Cmax 0.4 V4
Soft startup time tSSVIN = 5.0 V, TJ = 25 °C; from EN high to 95% of VOUT nominaltyp 0.9 ms4
Feedback regulation voltage VFBVIN = 5.0 V, TJ = 25 °Cmin 0.588 · typ 0.6 · max 0.612 V5
Input leakage current into FB pin IFBVIN = 5.0 V, TJ = 25 °C, VFB = 0.6 Vtyp 10 nA5
High-side FET on resistance RDS(on)VIN = 5.0 V, TJ = 25 °Ctyp 100 mΩ5
Low-side FET on resistance RDS(on)VIN = 5.0 V, TJ = 25 °Ctyp 60 mΩ5
High-side FET current limit ILIMTLV62569A; VIN = 5.0 V, TJ = 25 °Cmin 3 A5
Switching frequency fSWVIN = 5.0 V, TJ = 25 °Ctyp 1.5 MHz5

Pins, by the datasheet

6
1 FB
Feedback pin for the internal control loop; connect to an external feedback divider. · p. 3
2 GND
Ground pin. · p. 3
3 VIN
Power supply voltage input. · p. 3
4 SW
Switch pin connected to the internal FET switches; connect the output filter inductor to this pin. · p. 3
5 EN
Logic high enables the device; logic low disables it into shutdown; do not leave floating. · p. 3
6 NC
No connection for TLV62569ADRL; connect to output or ground to enhance thermal performance, or leave floating. · p. 3

Ordering codes, by the datasheet

4
TLV62569ADRLR
SOT-5X3 (DRL) · 6 pins; 3000, LARGE T&R; -40 to 125 °C; lead finish Call TI | Sn · p. 16
TLV62569ADRLR.A
SOT-5X3 (DRL) · 6 pins; 3000, LARGE T&R; -40 to 125 °C; lead finish SN · p. 16
TLV62569ADRLT
SOT-5X3 (DRL) · 6 pins; 250, SMALL T&R; -40 to 125 °C; lead finish Call TI | Sn · p. 16
TLV62569ADRLT.A
SOT-5X3 (DRL) · 6 pins; 250, SMALL T&R; -40 to 125 °C; lead finish SN · p. 16

Open-source boards using it

7
  • 4 layers50 × 30 mmPicothermal hardware, the printed circuit board in 3D

    Picothermal hardware

    icamaster/picothermal

    Thermal camera based on Flir Lepton with RP2040 and USB-C

    121 parts72MIT
  • 4 layers39.3 × 60.8 mmESPY, the printed circuit board in 3D

    ESPY

    Az154za/ESPY

    The reason I chose the p4 is because it's very good for cameras .

    89 parts1
  • 4 layers55.5 × 70 mmESP32 LoRa Wireless Node, the printed circuit board in 3D

    ESP32 LoRa Wireless Node

    Balamanikandan-projects/ESP32-RFM95W-LoRa-Wireless-Telemetry-Node

    A compact, high-performance, 4-layer custom PCB design integrating an ESP32-WROOM-32E microcontroller with an RFM95W sub-GHz LoRa radio module.

    31 parts
  • 4 layers40 × 40 mmCertusNX, the printed circuit board in 3D

    CertusNX

    c4tsnest/certus_test

    125 parts
  • 4 layers64.8 × 38.1 mmNpu extension, the printed circuit board in 3D

    Npu extension

    akram202/PCB_PROJECT_

    82 partsMIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TLV62569ADRL?

Yes. The symbol is Regulator_Switching:TLV62569ADRL and the footprint Package_TO_SOT_SMD:SOT-563, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TLV62569ADRL?

SOT-563, with 6 pins. Its footprint is drawn on this page.

Where is the TLV62569ADRL datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TLV62569ADRL?

JLCPCB lists it as part C398367, with 10,783 in stock; the sellers' links on this page open their listings.

What can replace the TLV62569ADRL?

Parts like it in the library: the TPS61023DRL by Texas Instruments, the TPS564247DRL by Texas Instruments, the TLV62585PDRL by Texas Instruments and the TPS563203DRL by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TLV62569ADRL?

7 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.