Skip to the content
PCBKitNew board
TLV2372IP on a board, in 3D

TLV2372IP

Texas Instruments

-40℃~+125℃ -8V~-1.35V、1.35V~8V 16mA 1pA 1pA 2 2.1V/us 2.7V~16V 2uV/℃ 35nV/√Hz@10kHz 3MHz 4.5mV 550uA 84dB Enable/shutdown function、Built-in compensation Rail-to-Rail Input, Rail-to-Rail Output PDIP-8 Operational Amplifier ROHS

Extended
DatasheetJLCPCBLCSCti/TLV2372IP
Category
Operational Amplifier
Package
PDIP-8
Pins
8

Overview

The TLV2372IP is an operational Amplifier made by Texas Instruments in a PDIP-8 package with 8 pins. -40℃~+125℃ -8V~-1.35V、1.35V~8V 16mA 1pA 1pA 2 2.1V/us 2.7V~16V 2uV/℃ 35nV/√Hz@10kHz 3MHz 4.5mV 550uA 84dB Enable/shutdown function、Built-in compensation Rail-to-Rail Input, Rail-to-Rail Output PDIP-8 Operational Amplifier ROHS.

PCBKit's library has its KiCad symbol (Amplifier_Operational:TLV2372, from KiCad's library) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 3 are in stock at JLCPCB (part C2878991). 28 open-source boards in 26 repositories on GitHub use it.

Symbol

1-2+3
Amplifier_Operational:TLV2372From KiCad's library

Footprint

12345678
Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Parameters

16
Common Mode Rejection Ratio(CMRR)
84dB
Dual Supply
1.35V~8V
Features
Built-in compensation
Gain Bandwidth Product
3MHz
Ib - Input Bias Current
1pA
Input Offset Current(Ios)
1pA
Input Offset Voltage Drift(Vos TC)
2uV/℃
Input Voltage Noise Density
35nV/√Hz@10kHz
Number of Channels
2
Operating Temperature
-40℃~+125℃
Output Current
16mA
Quiescent Current
550uA
Rail to Rail
Rail-to-Rail Input, Rail-to-Rail Output
Single supply
2.7V~16V
Slew Rate
2.1V/us
Vos - Input Offset Voltage
4.5mV

Order codes

1

Pinout

8
The pins of the TLV2372IP
PinNameType
1—Output
2-Input
3+Input
4V-Power in
5+Input
6-Input
7—Output
8V+Power in

Open-source boards using it

All 28
  • 2 layers101.6 × 53.3 mmBatteryAnalyzer MkII, the printed circuit board in 3D

    BatteryAnalyzer MkII

    Moragor/BatteryAnalyzer_MkII

    Updated Version of the battery analyzer, now with constant current

    25 parts12MIT
  • 2 layers105.5 × 86 mmECE302 Lab8, the printed circuit board in 3D

    ECE302 Lab8

    alexcjang/20V-5V-Buck-Converter

    41 parts
  • 2 layers52 × 48 mmSTM32-Based Programmable Waveform Generator, the printed circuit board in 3D

    STM32-Based Programmable Waveform Generator

    devjamescollier/STM-32_Based_Waveform_Generator

    USB-powered programmable function generator built around an STM32C031K6T6 microcontroller and MCP4901 DAC. Generates clean sine, triangle, and square waveforms with amplitude control via potentiometer, mode selection…

    48 partsCERN-OHL-P-2.0
  • 2 layers30 × 30 mmSteering Sensor (1), the printed circuit board in 3D

    Steering Sensor (1)

    dnz1666/impedance-buffer-pcb

    Analog circuit design (impedance buffer + LP filter) – KiCad schematic & PCB layout for a student EV project at RWTH Aachen

    14 parts
  • 4 layers160 × 70 mmAfternoonBlend, the printed circuit board in 3D

    AfternoonBlend

    dumaiss/PercolatorLabs

    Repo for all the Coffee Series pBITz multimedia cards

    81 parts
  • 2 layers53.3 × 99.8 mmAdapater a, the printed circuit board in 3D

    Adapater a

    jensboe/Modellbahn

    columns 1 block:selfmade block:base columns 1 nucleo adapter["adapter board A"] end space expansion1["expansion board A 1"] space expansionn["expansion board A n"] space expansionb["expansion board B"] adapter…

    58 parts
  • 4 layers70 × 30 mmHarm meas using os, the printed circuit board in 3D

    Harm meas using os

    jkbkwcn/harm_meas_using_os

    An electronic circuit project designed to measure mains current harmonics with amplitudes below one Least Significant Bit (LSB) of an Analog-to-Digital Converter.

    67 parts
  • 2 layers130 × 44.4 mmTurbine, the printed circuit board in 3D

    Turbine

    JohnRipple/turbine-sensor

    After taking a look at the kit it was lacking content. It could be built in about 10 minutes. With a 45 minute time slot for each class there was a lot of time to fill, so I decided to make a more interesting turbine…

    10 parts

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/ti/TLV2372IP" title="TLV2372IP in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/ti/TLV2372IP.jpg" alt="TLV2372IP" width="1200" height="900">
A picture that opens the part, for a README
[![TLV2372IP](https://pcbkit.io/embed/parts/ti/TLV2372IP.jpg?size=s)](https://pcbkit.io/parts/ti/TLV2372IP)

Questions

Is there a KiCad symbol and footprint for the TLV2372IP?

Yes. The symbol is Amplifier_Operational:TLV2372 and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TLV2372IP?

PDIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the TLV2372IP datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TLV2372IP?

JLCPCB lists it as part C2878991, with 3 in stock; the sellers' links on this page open their listings.

What can replace the TLV2372IP?

Parts like it in the library: the LM358N by HGSEMI, the LM358N/NOPB by Texas Instruments, the LM258P by Texas Instruments and the LM741CN/NOPB by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TLV2372IP?

28 boards in 26 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8