2 layers42.4 × 18.4 mm
THS7376IPW
Texas Instruments
-40℃~+85℃ 0.2% 0.3deg 100mA 10MHz 30.9mA 375V/us 37mA 3V~5.25V 8 Enable/shutdown function、Anti-aliasing / reconstruction filter、Filter bypass、DC clamp / DC restore、ESD protection Four channels TSSOP-14 Video Amplifiers ROHS
Extended
- Category
- Operational Amplifier
- Package
- TSSOP-14
- Pins
- 14
Overview
The THS7376IPW is an operational Amplifier made by Texas Instruments in a TSSOP-14 package with 14 pins. -40℃~+85℃ 0.2% 0.3deg 100mA 10MHz 30.9mA 375V/us 37mA 3V~5.25V 8 Enable/shutdown function、Anti-aliasing / reconstruction filter、Filter bypass、DC clamp / DC restore、ESD protection Four channels TSSOP-14 Video Amplifiers ROHS.
PCBKit's library has its footprint (Package_SO:TSSOP-14_4.4x5mm_P0.65mm, from KiCad's library), ready for a KiCad board. 80 are in stock at JLCPCB (part C2868911). 3 open-source boards in 3 repositories on GitHub use it.
Symbol
The library has no symbol for this part yet.
Footprint
From the datasheet
15- Supply, least
- 3 V · VS+, recommended operating min · p. 3
- Supply, most
- 5.25 V · VS+, recommended operating max · p. 3
- Supply, absolute maximum
- 5.5 V · VS+ to GND, absolute max · p. 2
- Works from
- -40 °C · Ambient temperature, min · p. 3
- Works up to
- 85 °C · Ambient temperature, max · p. 3
- Junction, hottest
- 150 °C · Junction temperature, any condition, absolute max · p. 2
- Takes working
- 30.9 mA · VS+, typical total quiescent current at 3.3 V, enabled, no load · p. 5
- Takes working
- 32.6 mA · VS+, typical total quiescent current at 5 V, enabled, no load · p. 8
- Takes at most
- 39 mA · VS+, max total quiescent current at 5 V, enabled, no load · p. 8
- Takes asleep
- 100 nA · VS+, typical disabled current at 3.3 V, no load · p. 5
- A pin gives at most
- 75 mA · Continuous output current magnitude, absolute max · p. 2
- Junction to air (PW (TSSOP))
- 124.2 K/W · Junction-to-ambient thermal resistance · p. 2
- Junction to case (PW (TSSOP))
- 52.9 K/W · Junction-to-case (top) thermal resistance · p. 2
- Junction to board (PW (TSSOP))
- 66 K/W · Junction-to-board thermal resistance · p. 2
- Junction, hottest
- 125 °C · junction temperature max · p. 46
What it is and has
7- SD video filter
- One 6th-order, 10-MHz filter for NTSC, PAL, SECAM and CVBS · p. 34
- HD video filters
- Three 8th-order, 42-MHz filters · p. 34
- Gain
- Internally fixed, 2 V/V (+6 dB) · p. 34
- Video line drive
- Two video lines per channel; DC or AC coupling · p. 34
- ESD protection
- 10 kV on video output pins; 8 kV on all other pins · p. 34
- Input coupling
- DC with level shift, AC sync-tip clamp, or AC bias · p. 34
- Package
- TSSOP-14 · p. 9
Around it
3- cap 0.1-μF to 0.01-μF
- between VS+ and GND; Place as close as possible to the power-supply pins. · p. 39
- cap 22 μF to 100 μF
- between VS+ and GND; Example bulk capacitor on the power-supply line to minimize 50- and 60-Hz interference. · p. 39
- res 75 Ω
- between video output and video line; Series source termination at each output; place within 0.5 inches (12.7 mm) of the output pin. · p. 46
Specifications
106| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Voltage VS+ | Supply, VS+ to GND | max 5.5 V | 2 |
| Voltage VI | Input | min -0.4 V | 2 |
| Continuous Output current IO | min -75 · max 75 mA | 2 | |
| Temperature TJ | Maximum junction, any condition | max 150 °C | 2 |
| Temperature TJ | Maximum junction, continuous operation, long-term reliability | max 125 °C | 2 |
| Temperature Tstg | Storage range | min -60 · max 150 °C | 2 |
| Electrostatic discharge (ESD) ratings | Output pins; Human body model (HBM) | min -10 · max 10 kV | 2 |
| Electrostatic discharge (ESD) ratings | Output pins; Charge device model (CDM) | min -2 · max 2 kV | 2 |
| Electrostatic discharge (ESD) ratings | All other pins; Human body model (HBM) | min -8 · max 8 kV | 2 |
| Electrostatic discharge (ESD) ratings | All other pins; Charge device model (CDM) | min -1 · max 1 kV | 2 |
| Junction-to-ambient thermal resistance θJA | PW (TSSOP), 14 PINS | typ 124.2 °C/W | 2 |
| Junction-to-case (top) thermal resistance θJCtop | PW (TSSOP), 14 PINS | typ 52.9 °C/W | 2 |
| Junction-to-board thermal resistance θJB | PW (TSSOP), 14 PINS | typ 66 °C/W | 2 |
| Junction-to-top characterization parameter ψJT | PW (TSSOP), 14 PINS | typ 7.3 °C/W | 2 |
| Junction-to-board characterization parameter ψJB | PW (TSSOP), 14 PINS | typ 65.4 °C/W | 2 |
| Supply voltage VS+ | min 3 · max 5.25 V | 3 | |
| Ambient temperature TA | min -40 · typ 25 · max 85 °C | 3 | |
| Passband bandwidth BW(PB) | SD (CVBS); –1 dB, VO = 0.2 VPP and 2 VPP | min 7.5 · typ 9 · max 11.5 MHz | 3 |
| Small- and large-signal bandwidth | SD (CVBS); –3 dB, VO = 0.2 VPP and 2 VPP | min 8.2 · typ 10 · max 12 MHz | 3 |
| Attenuation | SD (CVBS); With respect to 500 kHz, f = 6.75 MHz | min -1 · typ -0.1 · max 0.9 dB | 3 |
| Attenuation | SD (CVBS); With respect to 500 kHz, f = 27 MHz | min 38 · typ 46 dB | 3 |
| Group delay | SD (CVBS); f = 100 kHz | typ 68 ns | 3 |
| Group delay variation | SD (CVBS); f = 5.1 MHz with respect to 100 kHz | typ 10 ns | 3 |
| Differential gain | SD (CVBS); NTSC | typ 0.2 % | 3 |
| Differential gain | SD (CVBS); PAL | typ 0.2 % | 3 |
| Differential phase | SD (CVBS); NTSC | typ 0.3 Degrees | 3 |
| Differential phase | SD (CVBS); PAL | typ 0.3 Degrees | 3 |
| Total harmonic distortion THD | SD (CVBS); f = 1 MHz, VO = 1.4 VPP | typ -70 dB | 3 |
| Total harmonic distortion THD | SD (CVBS); f = 6 MHz, VO = 1.4 VPP | typ -62 dB | 3 |
| Signal-to-noise ratio SNR | SD (CVBS); 100 kHz to 6 MHz, non-weighted | typ 70 dB | 3 |
| Signal-to-noise ratio SNR | SD (CVBS); 100 kHz to 6 MHz, unified weighting | typ 78 dB | 3 |
| Gain G | All channels, TA = +25°C | min 5.7 · typ 6 · max 6.3 dB | 3 |
| Gain G | All channels, TA = –40°C to +85°C | min 5.65 · max 6.35 dB | 3 |
| Output impedance | SD (CVBS); f = 6.75 MHz | typ 0.7 Ω | 3 |
| Return loss | SD (CVBS); f = 6.75 MHz | typ 46 dB | 3 |
| Crosstalk | f = 1 MHz, SD channel to HD channels | typ -90 dB | 3 |
| Passband bandwidth | HD; –1 dB, VO = 0.2 VPP and 2 VPP | min 32 · typ 39 · max 46.5 MHz | 4 |
| Small- and large-signal bandwidth | HD; –3 dB, VO = 0.2 VPP and 2 VPP | min 35.5 · typ 42 · max 49.5 MHz | 4 |
| HD bypass mode bandwidth | HD; –3 dB, VO = 0.2 VPP | min 200 · typ 300 MHz | 4 |
| Slew rate SR | HD bypass mode | min 300 · typ 375 V/us | 4 |
| Attenuation | HD; With respect to 500 kHz, f = 30 MHz | min -1 · typ -0.2 · max 0.9 dB | 4 |
| Attenuation | HD; With respect to 500 kHz, f = 74 MHz | min 26 · typ 40 dB | 4 |
| Group delay | HD; f = 100 kHz | typ 23 ns | 4 |
| Group delay variation | HD; f = 27 MHz with respect to 100 kHz | typ 5.5 ns | 4 |
| Channel-to-channel delay | HD | typ 0.3 ns | 4 |
| Total harmonic distortion THD | HD; f = 10 MHz, VO = 1.4 VPP | typ -57 dB | 4 |
| Total harmonic distortion THD | HD; f = 30 MHz, VO = 1.4 VPP | typ -60 dB | 4 |
| Signal-to-noise ratio SNR | HD; 100 kHz to 30 MHz, non-weighted | typ 63 dB | 4 |
| Signal-to-noise ratio SNR | HD; 100 kHz to 30 MHz, unified weighting | typ 73 dB | 4 |
| Output impedance | HD; f = 30 MHz, filter mode | typ 1.3 Ω | 4 |
| Output impedance | f = 30 MHz, HD bypass mode | typ 1.4 Ω | 4 |
| Return loss | HD; f = 30 MHz, filter mode | typ 41 dB | 4 |
| Crosstalk | f = 1 MHz, HD channels to SD channel | typ -85 dB | 4 |
| Crosstalk | f = 1 MHz, HD to HD channels | typ -85 dB | 4 |
| Biased output voltage VO(Bias) | VIN = 0 V, SD channel | min 100 · typ 210 · max 300 mV | 4 |
| Biased output voltage VO(Bias) | VIN = 0 V, HD channels | min 100 · typ 210 · max 300 mV | 4 |
| Sync-tip clamp charge current | VIN = –0.1 V, SD channel | min 140 · typ 200 uA | 4 |
| Sync-tip clamp charge current | VIN = –0.1 V, HD channels | min 260 · typ 360 uA | 4 |
| High output voltage swing | RL = 150 Ω to +1.65 V | typ 3.2 V | 5 |
| High output voltage swing | RL = 150 Ω to GND | min 2.85 · typ 3.1 V | 5 |
| High output voltage swing | RL = 75 Ω to +1.65 V | typ 3.1 V | 5 |
| High output voltage swing | RL = 75 Ω to GND | typ 3 V | 5 |
| Low output voltage swing | RL = 150 Ω to +1.65 V (VIN = –0.2 V) | typ 0.07 V | 5 |
| Low output voltage swing | RL = 150 Ω to GND (VIN = –0.2 V) | typ 0.06 · max 0.1 V | 5 |
| Low output voltage swing | RL = 75 Ω to +1.65 V (VIN = –0.2 V) | typ 0.1 V | 5 |
| Low output voltage swing | RL = 75 Ω to GND (VIN = –0.2 V) | typ 0.05 V | 5 |
| Output current (sourcing) | RL = 10 Ω to +1.65 V | typ 100 mA | 5 |
| Output current (sinking) | RL = 10 Ω to +1.65 V | typ 110 mA | 5 |
| Operating voltage | min 2.85 · typ 3.3 · max 5.5 V | 5 | |
| Total quiescent current, no load | VIN = 0 V, enabled, VDISABLE = 0 V | min 25.8 · typ 30.9 · max 37 mA | 5 |
| Total quiescent current, no load | VIN = 0 V, disabled, VDISABLE = 3 V | typ 0.1 · max 10 uA | 5 |
| Power-supply rejection ratio PSRR | At dc | typ 50 dB | 5 |
| High-level input voltage VIH | Disabled or HD bypass engaged | min 2 · typ 1.8 V | 5 |
| Low-level input voltage VIL | Enabled or HD bypass disengaged | typ 0.7 · max 0.65 V | 5 |
| High-level input current IIH | Applied voltage = 3 V | typ 1 uA | 5 |
| Low-level input current IIL | Applied voltage = 0 V | typ 0.1 uA | 5 |
| Disable time tdis | Disable pin transitions from low to high | typ 125 ns | 5 |
| Enable time ten | Disable pin transitions from high to low | typ 200 ns | 5 |
| HD bypass and filter switch time | typ 10 ns | 5 | |
| Attenuation | SD (CVBS); With respect to 500 kHz, f = 27 MHz | min 38 · typ 46 dB | 6 |
| Group delay variation | SD (CVBS); f = 5.1 MHz with respect to 100 kHz | typ 9.5 ns | 6 |
| Differential gain | SD (CVBS); NTSC | typ 0.4 % | 6 |
| Differential gain | SD (CVBS); PAL | typ 0.4 % | 6 |
| Differential phase | SD (CVBS); NTSC | typ 0.2 Degrees | 6 |
| Total harmonic distortion THD | SD (CVBS); f = 6 MHz, VO = 1.4 VPP | typ -63 dB | 6 |
| Output impedance | SD (CVBS); f = 6.75 MHz | typ 0.6 Ω | 6 |
| Return loss | SD (CVBS); f = 6.75 MHz | typ 48 dB | 6 |
| Crosstalk | f = 1 MHz, SD channel to HD channels | typ -88 dB | 6 |
| Total harmonic distortion THD | HD; f = 10 MHz, VO = 1.4 VPP | typ -59 dB | 7 |
| Total harmonic distortion THD | HD; f = 30 MHz, VO = 1.4 VPP | typ -62 dB | 7 |
| Sync-tip clamp charge current | VIN = –0.1 V, HD channels | min 270 · typ 370 uA | 7 |
| High output voltage swing | RL = 150 Ω to +2.5 V | typ 4.85 V | 8 |
| High output voltage swing | RL = 150 Ω to GND | min 4.4 · typ 4.75 V | 8 |
| High output voltage swing | RL = 75 Ω to +2.5 V | typ 4.75 V | 8 |
| High output voltage swing | RL = 75 Ω to GND | typ 4.5 V | 8 |
| Low output voltage swing | RL = 150 Ω to +2.5 V (VIN = –0.2 V) | typ 0.09 V | 8 |
| Low output voltage swing | RL = 150 Ω to GND (VIN = –0.2 V) | typ 0.05 · max 0.1 V | 8 |
| Low output voltage swing | RL = 75 Ω to +2.5 V (VIN = –0.2 V) | typ 0.15 V | 8 |
| Output current (sourcing) | RL = 10 Ω to +2.5 V | typ 150 mA | 8 |
| Output current (sinking) | RL = 10 Ω to +2.5 V | typ 140 mA | 8 |
| Operating voltage | min 2.85 · typ 5 · max 5.5 V | 8 | |
| Total quiescent current, no load | VIN = 0 V, enabled, VDISABLE = 0 V | min 27.2 · typ 32.6 · max 39 mA | 8 |
| Power-supply rejection ratio PSRR | At dc | typ 53 dB | 8 |
| High-level input voltage VIH | Disabled or HD bypass engaged | min 2.2 · typ 2.1 V | 8 |
| Low-level input voltage VIL | Enabled or HD bypass disengaged | typ 0.8 · max 0.75 V | 8 |
| Disable time tdis | Disable pin transitions from low to high | typ 100 ns | 8 |
Pins, by the datasheet
14- 1 CVBS IN
- CVBS filter video input. · p. 9
- 2 HD CH1 IN
- HD channel 1 video input. · p. 9
- 3 HD CH2 IN
- HD channel 2 video input. · p. 9
- 4 HD CH3 IN
- HD channel 3 video input. · p. 9
- 5 GND
- Ground pin for all internal circuitry. · p. 9
- 6 DISABLE
- Logic high disables the device; logic low enables it. Defaults to logic low if left floating. · p. 9
- 7 NC
- No internal connection. · p. 9
- 8 NC
- No internal connection. · p. 9
- 9 HD BYPASS
- Logic high bypasses the HD low-pass filters; logic low uses them. Defaults to filter mode if floating. The SD filter is never bypassed. · p. 9
- 10 VS+
- Positive power-supply pin; connect to +3 V to +5 V. · p. 9
- 11 HD CH3 OUT
- HD channel 3 video output. · p. 9
- 12 HD CH2 OUT
- HD channel 2 video output. · p. 9
- 13 HD CH1 OUT
- HD channel 1 video output. · p. 9
- 14 CVBS OUT
- CVBS filter video output. · p. 9
Ordering codes, by the datasheet
2- THS7376IPW
- TSSOP · 14 pins, PW drawing, package quantity 90; operating temperature -40 to 85 °C · p. 56
- THS7376IPWR
- TSSOP · 14 pins, PW drawing, package quantity 2000; operating temperature -40 to 85 °C · p. 56
Parameters
22- -3dB Bandwidth
- 10MHz
- Current - Output
- 100mA
- Current - Supply
- 30.9mA
- Current - Supply(Max)
- 39mA
- Differential Gain
- 0.2%
- Differential Phase
- 0.3deg
- Features
- Anti-aliasing / reconstruction filter
- Filter Order
- 8
- Ib - Input Bias Current
- 37mA
- Junction Temperature(Max)
- 150℃
- Number of Channels
- 4
- Operating Temperature
- -40℃~+85℃
- Output Current per Pin(Max)
- 75mA
- Quiescent Current
- 30.9mA
- Single Supply
- 3V~5.25V
- Slew Rate
- 375V/us
- Standby Current
- 100nA
- Thermal Resistance(Junction to Ambient)
- 124.2℃/W
- Thermal Resistance(Junction to Board)
- 66℃/W
- Thermal Resistance(Junction to Case)
- 52.9℃/W
- Voltage - Supply
- 3V~5.25V
- Voltage - Supply(Absolute Max)
- 5.5V
Order codes
2- THS7376IPWLCSC C1879736
- THS7376IPWRLCSC C2868911
Open-source boards using it
All 3- 2 layers135.1 × 85.8 mm
Winchester
yoonjustin/WinchesterPCB
Open source JAMMA supergun project. KiCAD PCB design files
89 parts10MIT - 2 layers55.9 × 37.2 mm
HKTV13RGB
RetroLoom/HKTV13RGB
Open-hardware RGB mod for the Emerson HKTV13 "Hello Kitty" CRT TV — an interposer board that injects switchable external RGB while preserving the original OSD.
35 partsCERN-OHL-S-2.0
Show this part on your page
<iframe src="https://pcbkit.io/embed/parts/ti/THS7376IPW" title="THS7376IPW in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/ti/THS7376IPW.jpg" alt="THS7376IPW" width="1200" height="900">[](https://pcbkit.io/parts/ti/THS7376IPW)Questions
Is there a KiCad symbol and footprint for the THS7376IPW?
Yes. the footprint Package_SO:TSSOP-14_4.4x5mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the THS7376IPW?
TSSOP-14, with 14 pins. Its footprint is drawn on this page.
Where is the THS7376IPW datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the THS7376IPW?
JLCPCB lists it as part C2868911, with 80 in stock; the sellers' links on this page open their listings.
What can replace the THS7376IPW?
Parts like it in the library: the TLV2374IPW by Texas Instruments, the TLV274IPW by Texas Instruments, the LTC324XT14/R6 by Linearin and the LTC6004XT14/R6 by Linearin. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the THS7376IPW?
3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.
Parts like it
8
TLV2374IPW
TSSOP-14-40℃~+125℃ -8V~-1.35V、1.35V~8V 1pA 1pA 2.4V/us 2.7V~16V 2uV/℃ 39nV/√Hz@1kHz 3MHz 4 4.5mV 660uA 8mA 98dB Rail-to-Rail Input, Rail-to-Rail Output TSSOP-14 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierTLV274IPW
TSSOP-14-40℃~+125℃ -8V~-1.35V、1.35V~8V 13mA 1pA 2.4V/us 2.7V~16V 2uV/℃ 39nV/√Hz@10kHz 3MHz 4 500uV 550uA 60pA 69dB Rail-to-rail output TSSOP-14 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierLTC324XT14/R6
TSSOP-14-2.75V~-900mV、900mV~2.75V -40℃~+125℃ 1.2MHz 1.8V~5.5V 150uA 1V/us 27nV/√Hz@10kHz 3.5uV/℃ 3mV 4 40mA 50pA 50pA 77dB ESD protection、EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output TSSOP-14 Operational Amplifier ROHSLinearinOperational AmplifierLTC6004XT14/R6
TSSOP-14-2.75V~-900mV、900mV~2.75V -40℃~+125℃ 1.2V/us 1.5MHz 1.8V~5.5V 1pA 1pA 1uV/℃ 25nV/√Hz@1kHz 4 45mA 500uV 75uA 83dB ESD protection、EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output TSSOP-14 Operational Amplifier ROHSLinearinOperational AmplifierLTC724XT14/R6
TSSOP-14-2.75V~-1V、1V~2.75V -40℃~+125℃ 1.8V~5.5V 11.5V/us 11MHz 1pA 1pA 3mV 3uV/℃ 4 70mA 780uA 78dB 8nV/√Hz@1kHz EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output TSSOP-14 Operational Amplifier ROHSLinearinOperational AmplifierADA4851-4YRUZ
TSSOP-14-40℃~+125℃ -5V~5V 105dB 10nV/√Hz@100kHz 125mA 130MHz 2.7V~12V 2.9mA 20nA 375V/us 4 4uA 4uV/℃ 600uV Rail-to-rail output TSSOP-14 Operational Amplifier ROHSAnalog DevicesOperational AmplifierAD8630ARUZ
TSSOP-14-2.5V~-1.35V、1.35V~2.5V -40℃~+125℃ 100pA 130dB 1V/us 1mA 1uV 2.5MHz 2.7V~5V 200pA 22nV/√Hz@1kHz 2nV/℃ 30mA Four channels Rail-to-Rail Input, Rail-to-Rail Output Zero drift / auto-zero、Reverse-phase input protection TSSOP-14 Precision Op Amps ROHSAnalog DevicesOperational AmplifierADA4084-4ARUZ
TSSOP-14-1.5V~15V -40℃~+125℃ 1.75uV/℃ 100uV 10mA 124dB 15.9MHz 25nA 3.9nV/√Hz@1kHz 3V~30V 4 4.6V/us 400nA 650uA Built-in compensation Rail-to-Rail Input, Rail-to-Rail Output TSSOP-14 Operational Amplifier ROHSAnalog DevicesOperational Amplifier