Skip to the content
123456

SN74LVC1G175DCK

Texas InstrumentsExtended

-40℃~+125℃ 1 1 1.65V~5.5V 10uA 175MHz 2ns 32mA 32mA 3pF 500ps 5ns@5V,50pF 74LVC Series Asynchronous D-Type Reset Rising Edge SOT-363-6 Flip Flops ROHS

Part id
ti/SN74LVC1G175DCK
Category
Flip Flops
Package
SOT-363-6
Pins
6
In stock
128,283 at JLCPCB (C202238)
Used on
9 open-source boards

Overview

The SN74LVC1G175DCK is a flip Flop made by Texas Instruments in a SOT-363-6 package with 6 pins. -40℃~+125℃ 1 1 1.65V~5.5V 10uA 175MHz 2ns 32mA 32mA 3pF 500ps 5ns@5V,50pF 74LVC Series Asynchronous D-Type Reset Rising Edge SOT-363-6 Flip Flops ROHS.

PCBKit's library has its KiCad symbol (74xGxx:74LVC1G175, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-363_SC-70-6, from KiCad's library), ready for a KiCad board. 128,283 are in stock at JLCPCB (part C202238). 9 open-source boards in 6 repositories on GitHub use it.

Symbol

1C2GND3D4Q5VCC6CLR
74xGxx:74LVC1G175From KiCad's library

Footprint

123456
Package_TO_SOT_SMD:SOT-363_SC-70-6From KiCad's library

From the datasheet

8
Supply, least
1.65 V · VCC, recommended operating min · p. 4
Supply, most
5.5 V · VCC, recommended operating max · p. 4
Supply, absolute maximum
6.5 V · VCC, absolute maximum · p. 4
Works from
-40 °C · Operating free-air temperature min · p. 5
Works up to
125 °C · Operating free-air temperature max · p. 5
Takes working
10 µA · VCC supply current max, VI = 5.5 V or GND, IO = 0 · p. 5
A pin gives at most
50 mA · Continuous output current absolute maximum magnitude · p. 4
Junction to air (DCK (SC70))
259 K/W · Junction-to-ambient thermal resistance · p. 5

What it is and has

8
Function
Single D-type flip-flop with asynchronous clear · p. 1
5-V operation
Supports 5-V VCC operation · p. 1
Input voltage tolerance
5.5 V · p. 1
Down translation
Supports down translation to VCC · p. 1
Propagation delay
4.3 ns maximum at 3.3 V · p. 1
Power consumption
10 µA maximum ICC · p. 1
Output drive
±24 mA at 3.3 V · p. 1
Package
DCK, SC70 (6), 2.00 mm × 1.25 mm body · p. 1

Around it

1
cap 0.1-μF
between VCC and GND; Recommended bypass capacitor for a single supply; install as close to the power terminal as possible. · p. 12

Specifications

134
ParameterConditionsAs printedPage
Supply voltage VCCOver operating free-air temperature rangemin -0.5 · max 6.5 V4
Input voltage VIOver operating free-air temperature rangemin -0.5 · max 6.5 V4
Voltage applied to any output in the high-impedance or power-off state VOOver operating free-air temperature range; note (2)min -0.5 · max 6.5 V4
Voltageapplied to any output in the high or low state VOMaximum VCC + 0.5 V; notes (2), (3)min -0.5 V4
Input clamp current IIKVI < 0max -50 mA4
Output clamp current IOKVO < 0max -50 mA4
Continuous output current IO±50 mA; maximum magnitudemax 50 mA4
Continuous current through VCC or GND±100 mA; maximum magnitudemax 100 mA4
Storage temperature Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; rated withstand valuemax 2000 V4
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22-C101; rated withstand valuemax 1000 V4
Supply voltage VCCOperatingmin 1.65 · max 5.5 V4
Supply voltage VCCData retention onlymin 1.5 V4
High-level input voltage VIHVCC = 2.3 V to 2.7 Vmin 1.7 V4
High-level input voltage VIHVCC = 3 V to 3.6 Vmin 2 V4
Low-level input voltage VILVCC = 2.3 V to 2.7 Vmax 0.7 V4
Low-level input voltage VILVCC = 3 V to 3.6 Vmax 0.8 V4
Input voltage VImin 0 · max 5.5 V4
Output voltage VOMaximum VCCmin 0 V4
High-level output current IOHVCC = 1.65 Vmax -4 mA4
High-level output current IOHVCC = 2.3 Vmax -8 mA4
High-level output current IOHVCC = 3 Vmax -16 mA4
High-level output current IOHVCC = 3 Vmax -24 mA4
High-level output current IOHVCC = 4.5 Vmax -32 mA4
Low-level output current IOLVCC = 1.65 Vmax 4 mA5
Low-level output current IOLVCC = 2.3 Vmax 8 mA5
Low-level output current IOLVCC = 3 Vmax 16 mA5
Low-level output current IOLVCC = 3 Vmax 24 mA5
Low-level output current IOLVCC = 4.5 Vmax 32 mA5
Input transition rise or fall rate Δt/ΔvVCC = 1.8 V ± 0.15 V, 2.5 V ± 0.2 Vmax 20 ns/V5
Input transition rise or fall rate Δt/ΔvVCC = 3.3 V ± 0.3 Vmax 10 ns/V5
Input transition rise or fall rate Δt/ΔvVCC = 5 V ± 0.5 Vmax 10 ns/V5
Operating free-air temperature TAmin -40 · max 125 °C5
Junction-to-ambient thermal resistance RθJADCK (SC70), 6 PINS; tabulated thermal metrictyp 259 °C/W5
VOH VOH–40°C to 85°C; IOH = –4 mA; VCC = 1.65 Vmin 1.2 V5
VOH VOH–40°C to 125°C; IOH = –4 mA; VCC = 1.65 Vmin 1.2 V5
VOH VOH–40°C to 85°C; IOH = –8 mA; VCC = 2.3 Vmin 1.9 V5
VOH VOH–40°C to 125°C; IOH = –8 mA; VCC = 2.3 Vmin 1.9 V5
VOH VOH–40°C to 85°C; IOH = –16 mA; VCC = 3 Vmin 2.4 V5
VOH VOH–40°C to 125°C; IOH = –16 mA; VCC = 3 Vmin 2.4 V5
VOH VOH–40°C to 85°C; IOH = –24 mA; VCC = 3 Vmin 2.3 V5
VOH VOH–40°C to 125°C; IOH = –24 mA; VCC = 3 Vmin 2.3 V5
VOH VOH–40°C to 85°C; IOH = –32 mA; VCC = 4.5 Vmin 3.8 V5
VOH VOH–40°C to 125°C; IOH = –32 mA; VCC = 4.5 Vmin 3.8 V5
VOL VOL–40°C to 85°C; IOL = 100 uA; VCC = 1.65 V to 5.5 Vmax 0.1 V5
VOL VOL–40°C to 125°C; IOL = 100 uA; VCC = 1.65 V to 5.5 Vmax 0.1 V5
VOL VOL–40°C to 85°C; IOL = 4 mA; VCC = 1.65 Vmax 0.45 V5
VOL VOL–40°C to 125°C; IOL = 4 mA; VCC = 1.65 Vmax 0.45 V5
VOL VOL–40°C to 85°C; IOL = 8 mA; VCC = 2.3 Vmax 0.3 V5
VOL VOL–40°C to 125°C; IOL = 8 mA; VCC = 2.3 Vmax 0.3 V5
VOL VOL–40°C to 85°C; IOL = 16 mA; VCC = 3 Vmax 0.4 V5
VOL VOL–40°C to 125°C; IOL = 16 mA; VCC = 3 Vmax 0.4 V5
VOL VOL–40°C to 85°C; IOL = 24 mA; VCC = 3 Vmax 0.55 V5
VOL VOL–40°C to 125°C; IOL = 24 mA; VCC = 3 Vmax 0.55 V5
VOL VOL–40°C to 85°C; IOL = 32 mA; VCC = 4.5 Vmax 0.55 V5
VOL VOL–40°C to 125°C; IOL = 32 mA; VCC = 4.5 Vmax 0.55 V5
II II–40°C to 85°C; VI = 5.5 V or GND; VCC = 0 to 5.5 V; ±1 uA maximum magnitudemax 1 uA5
II II–40°C to 125°C; VI = 5.5 V or GND; VCC = 0 to 5.5 V; ±1 uA maximum magnitudemax 1 uA5
Ioff Ioff–40°C to 85°C; VI or VO = 5.5 V; VCC = 0 V; ±10 uA maximum magnitudemax 10 uA5
Ioff Ioff–40°C to 125°C; VI or VO = 5.5 V; VCC = 0 V; ±10 uA maximum magnitudemax 10 uA5
ICC ICC–40°C to 85°C; VI = 5.5 V or GND, IO = 0; VCC = 1.65 V to 5.5 Vmax 10 uA5
ICC ICC–40°C to 125°C; VI = 5.5 V or GND, IO = 0; VCC = 1.65 V to 5.5 Vmax 10 uA5
ΔICC ΔICC–40°C to 85°C; one input at VCC – 0.6 V, other inputs at VCC or GND; VCC = 3 V to 5.5 Vmax 500 uA5
ΔICC ΔICC–40°C to 125°C; one input at VCC – 0.6 V, other inputs at VCC or GND; VCC = 3 V to 5.5 Vmax 500 uA5
Ci Ci–40°C to 85°C column; VI = VCC or GND; VCC = 3.3 V; typical at TA = 25°Ctyp 3 pF5
Ci Ci–40°C to 125°C column; VI = VCC or GND; VCC = 3.3 V; typical at TA = 25°Ctyp 3 pF5
Clock frequency fclockVCC = 1.8 V ± 0.15 Vmax 100 MHz6
Clock frequency fclockVCC = 2.5 V ± 0.2 Vmax 125 MHz6
Clock frequency fclockVCC = 3.3 V ± 0.3 Vmax 150 MHz6
Clock frequency fclockVCC = 5 V ± 0.5 Vmax 175 MHz6
Pulse duration twCLR low; VCC = 1.8 V ± 0.15 Vmin 5.6 ns6
Pulse duration twCLR low; VCC = 2.5 V ± 0.2 Vmin 3 ns6
Pulse duration twCLR low; VCC = 3.3 V ± 0.3 Vmin 2.8 ns6
Pulse duration twCLR low; VCC = 5 V ± 0.5 Vmin 2.5 ns6
Pulse duration twCLK high or low; VCC = 1.8 V ± 0.15 Vmin 3.5 ns6
Pulse duration twCLK high or low; VCC = 2.5 V ± 0.2 Vmin 3 ns6
Pulse duration twCLK high or low; VCC = 3.3 V ± 0.3 Vmin 2.8 ns6
Pulse duration twCLK high or low; VCC = 5 V ± 0.5 Vmin 2.5 ns6
Setup time, before CLK↑ tsuData; VCC = 1.8 V ± 0.15 Vmin 3 ns6
Setup time, before CLK↑ tsuData; VCC = 2.5 V ± 0.2 Vmin 2.5 ns6
Setup time, before CLK↑ tsuData; VCC = 3.3 V ± 0.3 Vmin 2 ns6
Setup time, before CLK↑ tsuData; VCC = 5 V ± 0.5 Vmin 1.5 ns6
Setup time, before CLK↑ tsuCLR inactive; VCC = 1.8 V ± 0.15 Vmin 0 ns6
Setup time, before CLK↑ tsuCLR inactive; VCC = 2.5 V ± 0.2 Vmin 0 ns6
Setup time, before CLK↑ tsuCLR inactive; VCC = 3.3 V ± 0.3 Vmin 0.5 ns6
Setup time, before CLK↑ tsuCLR inactive; VCC = 5 V ± 0.5 Vmin 0.5 ns6
Hold time, data after CLK↑ thVCC = 1.8 V ± 0.15 Vmin 0 ns6
Hold time, data after CLK↑ thVCC = 2.5 V ± 0.2 Vmin 0 ns6
Hold time, data after CLK↑ thVCC = 3.3 V ± 0.3 Vmin 0.5 ns6
Hold time, data after CLK↑ thVCC = 5 V ± 0.5 Vmin 0.5 ns6
Setup time, before CLK↑ tsuCLR inactive; VCC = 1.8 V ± 0.15 Vmin 0.5 ns6
Setup time, before CLK↑ tsuCLR inactive; VCC = 2.5 V ± 0.2 Vmin 0.5 ns6
Setup time, before CLK↑ tsuCLR inactive; VCC = 3.3 V ± 0.3 Vmin 0.7 ns6
Setup time, before CLK↑ tsuCLR inactive; VCC = 5 V ± 0.5 Vmin 0.7 ns6
Hold time, data after CLK↑ thVCC = 1.8 V ± 0.15 Vmin 0.5 ns6
Hold time, data after CLK↑ thVCC = 2.5 V ± 0.2 Vmin 0.5 ns6
Hold time, data after CLK↑ thVCC = 3.3 V ± 0.3 Vmin 0.7 ns6
Hold time, data after CLK↑ thVCC = 5 V ± 0.5 Vmin 0.7 ns6
fmax fmaxCL = 15 pF; VCC = 1.8 V ± 0.15 Vmin 100 MHz6
fmax fmaxCL = 15 pF; VCC = 2.5 V ± 0.2 Vmin 125 MHz6
fmax fmaxCL = 15 pF; VCC = 3.3 V ± 0.3 Vmin 150 MHz6
fmax fmaxCL = 15 pF; VCC = 5 V ± 0.5 Vmin 175 MHz6
tpd tpdCLK to Q; CL = 15 pF; VCC = 1.8 V ± 0.15 Vmin 2.5 · max 12.9 ns6
tpd tpdCLK to Q; CL = 15 pF; VCC = 2.5 V ± 0.2 Vmin 2 · max 6.5 ns6
tpd tpdCLK to Q; CL = 15 pF; VCC = 3.3 V ± 0.3 Vmin 1.4 · max 4.6 ns6
tpd tpdCLK to Q; CL = 15 pF; VCC = 5 V ± 0.5 Vmin 1 · max 3 ns6
tpd tpdCLR to Q; CL = 15 pF; VCC = 1.8 V ± 0.15 Vmin 2.5 · max 12.4 ns6
tpd tpdCLR to Q; CL = 15 pF; VCC = 2.5 V ± 0.2 Vmin 2 · max 6 ns6
tpd tpdCLR to Q; CL = 15 pF; VCC = 3.3 V ± 0.3 Vmin 1.2 · max 4.3 ns6
tpd tpdCLR to Q; CL = 15 pF; VCC = 5 V ± 0.5 Vmin 1 · max 3.2 ns6
fmax fmaxCL = 30 pF or 50 pF; VCC = 1.8 V ± 0.15 Vmin 100 MHz6
fmax fmaxCL = 30 pF or 50 pF; VCC = 2.5 V ± 0.2 Vmin 125 MHz6
fmax fmaxCL = 30 pF or 50 pF; VCC = 3.3 V ± 0.3 Vmin 150 MHz6
fmax fmaxCL = 30 pF or 50 pF; VCC = 5 V ± 0.5 Vmin 175 MHz6
tpd tpdCLK to Q; CL = 30 pF or 50 pF; VCC = 1.8 V ± 0.15 Vmin 2.7 · max 13.4 ns6
tpd tpdCLK to Q; CL = 30 pF or 50 pF; VCC = 2.5 V ± 0.2 Vmin 2.2 · max 7.1 ns6
tpd tpdCLK to Q; CL = 30 pF or 50 pF; VCC = 3.3 V ± 0.3 Vmin 1.6 · max 5.7 ns6
tpd tpdCLK to Q; CL = 30 pF or 50 pF; VCC = 5 V ± 0.5 Vmin 1.5 · max 4 ns6
tpd tpdCLR to Q; CL = 30 pF or 50 pF; VCC = 1.8 V ± 0.15 Vmin 2.7 · max 12.9 ns6
tpd tpdCLR to Q; CL = 30 pF or 50 pF; VCC = 2.5 V ± 0.2 Vmin 2.2 · max 7 ns6
tpd tpdCLR to Q; CL = 30 pF or 50 pF; VCC = 3.3 V ± 0.3 Vmin 1.5 · max 5.8 ns6
tpd tpdCLR to Q; CL = 30 pF or 50 pF; VCC = 5 V ± 0.5 Vmin 1.3 · max 4.1 ns6
tpd tpdCLK to Q; CL = 30 pF or 50 pF; VCC = 1.8 V ± 0.15 Vmin 2.7 · max 15.4 ns7
tpd tpdCLK to Q; CL = 30 pF or 50 pF; VCC = 2.5 V ± 0.2 Vmin 2.2 · max 8.1 ns7
tpd tpdCLK to Q; CL = 30 pF or 50 pF; VCC = 3.3 V ± 0.3 Vmin 1.6 · max 6.7 ns7
tpd tpdCLK to Q; CL = 30 pF or 50 pF; VCC = 5 V ± 0.5 Vmin 1.5 · max 5 ns7
tpd tpdCLR to Q; CL = 30 pF or 50 pF; VCC = 1.8 V ± 0.15 Vmin 2.7 · max 14.9 ns7
tpd tpdCLR to Q; CL = 30 pF or 50 pF; VCC = 2.5 V ± 0.2 Vmin 2.2 · max 8 ns7
tpd tpdCLR to Q; CL = 30 pF or 50 pF; VCC = 3.3 V ± 0.3 Vmin 1.5 · max 6.8 ns7
tpd tpdCLR to Q; CL = 30 pF or 50 pF; VCC = 5 V ± 0.5 Vmin 1.3 · max 5.1 ns7
Power dissipation capacitance CpdTA = 25°C; f = 10 MHz; VCC = 1.8 Vtyp 18 pF7
Power dissipation capacitance CpdTA = 25°C; f = 10 MHz; VCC = 2.5 Vtyp 19 pF7
Power dissipation capacitance CpdTA = 25°C; f = 10 MHz; VCC = 3.3 Vtyp 19 pF7
Power dissipation capacitance CpdTA = 25°C; f = 10 MHz; VCC = 5 Vtyp 21 pF7

Pins, by the datasheet

6
1 CLK
Clock Input. · p. 3
2 GND
Ground. · p. 3
3 D
Data Input. · p. 3
4 Q
Output. · p. 3
5 VCC
Power. · p. 3
6 CLR
Clear Data Input. · p. 3

Open-source boards using it

9See all 9
  • 2 layers142.7 × 194.5 mmSoft Power Switch panelized, the printed circuit board in 3D

    Soft Power Switch panelized

    sparkfun/SparkFun_Soft_Power_Switch_Mk2

    Documentation, example code, and hardware for the SparkFun Soft Power Switch - JST 2mm.

    2,177 parts2
  • 2 layers25.4 × 25.4 mmSoft Power Switch USB C, the printed circuit board in 3D

    Soft Power Switch USB C

    sparkfun/SparkFun_Soft_Power_Switch_USB-C

    Documentation, example code, and hardware for the SparkFun Soft Power Switch - USB-C.

    61 parts2
  • 2 layers228.9 × 5.5 mmTMP117 section 5cm, the printed circuit board in 3D

    TMP117 section 5cm

    BerkeleyLab/DxP-sensor-probes

    Hardware design for the DxP (Distributed sensor Profiling) sensor probe.

    38 parts1
  • 4 layers46.5 × 67.8 mmLoggerhw v5.0, the printed circuit board in 3D

    Loggerhw v5.0

    BerkeleyLab/DxP-data-logger

    Hardware design for the DxP (Distributed sensor Profiling) data logger that connects to a DxP sensor probe.

    62 parts
  • 2 layers75 × 65 mmMotormodul, the printed circuit board in 3D

    Motormodul

    Meo98/picostack

    Stackable, contract-driven module system for the Raspberry Pi Pico — open hardware, built by code

    63 partsGPL-3.0
  • 2 layers25.4 × 25.4 mmSoft Power Switch, the printed circuit board in 3D

    Soft Power Switch

    sparkfun/SparkFun_Soft_Power_Switch_Mk2

    Documentation, example code, and hardware for the SparkFun Soft Power Switch - JST 2mm.

    63 parts2
  • 2 layers228.9 × 5.5 mmTMP117 section 10cm, the printed circuit board in 3D

    TMP117 section 10cm

    BerkeleyLab/DxP-sensor-probes

    Hardware design for the DxP (Distributed sensor Profiling) sensor probe.

    38 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SN74LVC1G175DCK?

Yes. The symbol is 74xGxx:74LVC1G175 and the footprint Package_TO_SOT_SMD:SOT-363_SC-70-6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SN74LVC1G175DCK?

SOT-363-6, with 6 pins. Its footprint is drawn on this page.

Where is the SN74LVC1G175DCK datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the SN74LVC1G175DCK?

JLCPCB lists it as part C202238, with 128,283 in stock; the sellers' links on this page open their listings.

What can replace the SN74LVC1G175DCK?

Parts like it in the library: the NC7SZ175P6X by onsemi, the SN74LVC1G374DCK by Texas Instruments, the NC7SZ374P6X by onsemi and the U74LVC1G175G-AL6-R by UTC. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SN74LVC1G175DCK?

9 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.