Skip to the content
7

OPT3001DNPR

Texas InstrumentsExtended

-40℃~+85℃ 0.65mm 1.8V~3.6V 1.8uA 2mm 2mm 83klx I2C Light Intensity USON-6-EP(2.1x2.1) Ambient Light Sensors ROHS

Part id
ti/OPT3001DNPR
Category
Ambient Light Sensors
Package
USON-6-EP(2.1x2.1)
Pins
7
In stock
2,075 at JLCPCB (C90462)
Used on
14 open-source boards

Overview

The OPT3001DNPR is an ambient Light Sensor made by Texas Instruments in a USON-6-EP(2.1x2.1) package with 7 pins. -40℃~+85℃ 0.65mm 1.8V~3.6V 1.8uA 2mm 2mm 83klx I2C Light Intensity USON-6-EP(2.1x2.1) Ambient Light Sensors ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:OPT4001DNPRQ1, from EasyEDA) and its footprint (EasyEDA_Cloud:USON6_L2.1-W2.1-P0.65-BL-EP, from EasyEDA), ready for a KiCad board. 2,075 are in stock at JLCPCB (part C90462). 14 open-source boards in 12 repositories on GitHub use it.

Symbol

1VDD2ADDR3GND4SCL5INT6SDA7EP
EasyEDA_Cloud:OPT4001DNPRQ1From EasyEDA

Footprint

7
EasyEDA_Cloud:USON6_L2.1-W2.1-P0.65-BL-EPFrom EasyEDA

From the datasheet

12
Supply, least
1.6 V · VDD, recommended operating min · p. 5
Supply, most
3.6 V · VDD, recommended operating max · p. 5
Supply, absolute maximum
6 V · VDD to GND, absolute max · p. 4
Works from
-40 °C · Operating temperature min · p. 4
Works up to
85 °C · Operating temperature max · p. 4
Junction, hottest
150 °C · Junction temperature absolute max · p. 4
Takes working
1.8 µA · VDD active, dark, VDD = 3.6 V, typical · p. 5
Takes asleep
300 nA · VDD shutdown, dark, VDD = 3.6 V, typical · p. 5
A pin gives at most
10 mA · Current into any pin, absolute max · p. 4
Junction to air (DNP (USON))
71.2 K/W · Junction-to-ambient thermal resistance · p. 4
Junction to case (DNP (USON))
45.7 K/W · Junction-to-case (top) thermal resistance · p. 4
Junction to board (DNP (USON))
42.2 K/W · Junction-to-board thermal resistance · p. 4

What it is and has

7
Infrared rejection
> 99% typical · p. 1
Measurement range
0.01 lux to 83 k lux · p. 1
Effective dynamic range
23-bit with automatic gain ranging · p. 1
Full-scale range settings
12 binary-weighted settings · p. 1
Interrupt
Flexible interrupt system · p. 1
Package
USON (6), 2.00 mm x 2.00 mm · p. 1
Interface
I2C and SMBus compatible · p. 12

Around it

5
res 10-kΩ
between SCL and 1.6-V to 5.5-V supply; I2C clock pull-up. · p. 3
res 10-kΩ
between INT and 1.6-V to 5.5-V supply; Open-drain interrupt pull-up. · p. 3
res 10-kΩ
between SDA and 1.6-V to 5.5-V supply; I2C data pull-up. · p. 3
cap 100 nF
between VDD and GND; Bypass capacitor close to the device, with solid grounding. · p. 32
res 10 kΩ
between SDA and digital communication supply; Typical pullup value; optimize for bus capacitance and system requirements. · p. 27

Specifications

46
ParameterConditionsAs printedPage
VoltageVDD to GNDmin -0.5 · max 6 V4
VoltageSDA, SCL, INT, and ADDR to GNDmin -0.5 · max 6 V4
Current into any pinmax 10 mA4
TemperatureJunctionmax 150 °C4
Temperature TstgStoragemin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; rating ±2000 Vmax 2000 V4
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22-C101; rating ±500 Vmax 500 V4
Operating temperaturemin -40 · max 85 °C4
Operating power-supply voltagemin 1.6 · max 3.6 V4
Junction-to-ambient thermal resistance RθJAOPT3001, DNP (USON), 6 PINStyp 71.2 °C/W4
Junction-to-case (top) thermal resistance RθJC(top)OPT3001, DNP (USON), 6 PINStyp 45.7 °C/W4
Junction-to-board thermal resistance RθJBOPT3001, DNP (USON), 6 PINStyp 42.2 °C/W4
Junction-to-top characterization parameter ψJTOPT3001, DNP (USON), 6 PINStyp 2.4 °C/W4
Junction-to-board characterization parameter ψJBOPT3001, DNP (USON), 6 PINStyp 42.8 °C/W4
Junction-to-case (bottom) thermal resistance RθJC(bot)OPT3001, DNP (USON), 6 PINStyp 17 °C/W4
Peak irradiance spectral responsivitytyp 550 nm5
Resolution (LSB)Lowest full-scale range, RN[3:0] = 0000btyp 0.01 lux5
Full-scale illuminancetyp 83865.6 lux5
Measurement output result0.64 lux per ADC code, 2620.80 lux full-scale (RN[3:0] = 0110), 2000 lux inputmin 2812 · typ 3125 · max 3437 ADC codes5
Measurement output result0.64 lux per ADC code, 2620.80 lux full-scale (RN[3:0] = 0110), 2000 lux inputmin 1800 · typ 2000 · max 2200 lux5
Relative accuracy between gain rangesCharacterized by measuring fixed near-full-scale light levels on the higher adjacent full-scale range settingtyp 0.2 %5
Infrared response (850 nm)typ 0.2 %5
Light source variation (incandescent, halogen, fluorescent)Bare device, no cover glasstyp 4 %5
LinearityInput illuminance > 40 luxtyp 2 %5
LinearityInput illuminance < 40 luxtyp 5 %5
Measurement drift across temperatureInput illuminance = 2000 luxtyp 0.01 %/°C5
Dark condition, ADC output0.01 lux per ADC codetyp 0 · max 3 ADC codes5
Dark condition, ADC output0.01 lux per ADC codetyp 0 · max 0.03 lux5
Half-power angle50% of full-power readingtyp 47 degrees5
Power-supply rejection ratio PSRRVDD at 3.6 V and 1.6 Vtyp 0.1 %/V5
Operating range VDDmin 1.6 · max 3.6 V5
Operating range of I2C pull-up resistor VI²CI2C pull-up resistor, VDD ≤ VI²Cmin 1.6 · max 5.5 V5
Quiescent current IQDark; Active, VDD = 3.6 Vtyp 1.8 · max 2.5 uA5
Quiescent current IQDark; Shutdown (M[1:0] = 00), VDD = 3.6 Vtyp 0.3 · max 0.47 uA5
Quiescent current IQFull-scale lux; Active, VDD = 3.6 Vtyp 3.7 uA5
Quiescent current IQFull-scale lux; Shutdown (M[1:0] = 00)typ 0.4 uA5
Power-on-reset threshold PORTA = 25°Ctyp 0.8 V5
I/O pin capacitancetyp 3 pF5
Total integration time(CT = 1), 800-ms mode, fixed lux rangemin 720 · typ 800 · max 880 ms5
Total integration time(CT = 0), 100-ms mode, fixed lux rangemin 90 · typ 100 · max 110 ms5
Low-level input voltage (SDA, SCL, and ADDR) VILmin 0 V5
High-level input voltage (SDA, SCL, and ADDR) VIHmax 5.5 V5
Low-level input current (SDA, SCL, and ADDR) IILtyp 0.01 · max 0.25 uA5
Low-level output voltage (SDA and INT) VOLIOL= 3 mAmax 0.32 V5
Output logic high, high-Z leakage current (SDA, INT) IZHPin at VDDtyp 0.01 · max 0.25 uA5
Specified temperature rangemin -40 · max 85 °C5

Pins, by the datasheet

6
1 VDD
Device power. Connect to a 1.6-V to 3.6-V supply. · p. 3
2 ADDR
Address pin. Sets the LSBs of the I2C address. · p. 3
3 GND
Ground. · p. 3
4 SCL
I2C clock. Connect with a 10-kΩ resistor to a 1.6-V to 5.5-V supply. · p. 3
5 INT
Open-drain interrupt output. Connect with a 10-kΩ resistor to a 1.6-V to 5.5-V supply. · p. 3
6 SDA
I2C data. Connect with a 10-kΩ resistor to a 1.6-V to 5.5-V supply. · p. 3

Ordering codes, by the datasheet

2
OPT3001DNPR
USON (DNP) · 6 pins; 3000 units, LARGE T&R; operating temperature -40 to 85 °C. · p. 37
OPT3001DNPR.A
USON (DNP) · 6 pins; 3000 units, LARGE T&R; operating temperature -40 to 85 °C. · p. 37

Open-source boards using it

14See all 14
  • 2 layers68 × 58 mmIot data logger nfc samd21, the printed circuit board in 3D

    Iot data logger nfc samd21

    polesskiy-dev/iot-risk-data-logger-nfc-samd21-hardware

    Hardware (schematics, PCB, BOM) for iot-risk-data-logger-nfc-samd21 project

    66 parts5MIT
  • 4 layers77 × 48.6 mmNX ISD, the printed circuit board in 3D

    NX ISD

    Ghost3379/NX-ISD

    A more sophisticated version of the Artemis Watch by Circuitmess.

    116 parts2GPL-3.0
  • 2 layers55 × 45 mmIot risk logger stm32l4, the printed circuit board in 3D

    Iot risk logger stm32l4

    polesskiy-dev/iot-risk-logger-stm32l4

    Open IoT risk data logger based on STM32L4 MCU

    52 parts2
  • 4 layers213.7 × 140.6 mmMSCKee, the printed circuit board in 3D

    MSCKee

    Creative-Difficulty/mSCKee

    Split Keyboard for Hack Club Outpost with dual light sensors, per-key addressable backlighting, integrated RP2040 MCU

    205 parts1
  • 2 layers20 × 20 mmB OPT3001-BRK R1.0, the printed circuit board in 3D

    B OPT3001-BRK R1.0

    Boardoza/Boardoza_OPT3001_Ambient_Light_Sensor_Breakout_Board

    OPT3001 is a compact ambient light sensor board with human-eye response matching and I²C communication support.

    15 partsCC-BY-SA-4.0
  • 4 layers61.8 × 79.8 mmOwl mainboard, the printed circuit board in 3D

    Owl mainboard

    danieltyukov/owltunes

    Owl-shaped Spotify remote for your desk and pocket: ESP32-S3 firmware, LVGL UI, KiCad PCB, 3D-printed enclosure, and owl v0 on the Waveshare AMOLED kit

    107 partsMIT
  • 2 layers51.5 × 55.8 mmI2C PP, the printed circuit board in 3D

    I2C PP

    noogums/I2C-PCB

    i2c-sensor-logger: - A 2-layer PCB that logs temperature, humidity, and ambient light over I2C to CSV via USB serial and displays live readings on an SSD1306 OLED.

    17 parts

Questions

Is there a KiCad symbol and footprint for the OPT3001DNPR?

Yes. The symbol is EasyEDA_Cloud:OPT4001DNPRQ1 and the footprint EasyEDA_Cloud:USON6_L2.1-W2.1-P0.65-BL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the OPT3001DNPR?

USON-6-EP(2.1x2.1), with 7 pins. Its footprint is drawn on this page.

Where is the OPT3001DNPR datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the OPT3001DNPR?

JLCPCB lists it as part C90462, with 2,075 in stock; the sellers' links on this page open their listings.

Which open-source boards use the OPT3001DNPR?

14 boards in 12 repositories on GitHub; the most starred are listed on this page, with their KiCad files.