Skip to the content
12345678

OPT101P

Texas InstrumentsExtended

0℃~+70℃ 120uA 2.7V~36V 6.52mm 9.53mm Light Intensity PDIP-8 Ambient Light Sensors ROHS

Part id
ti/OPT101P
Category
Ambient Light Sensors
Package
PDIP-8
Pins
8
In stock
1,950 at JLCPCB (C1526918)
Used on
8 open-source boards

Overview

The OPT101P is an ambient Light Sensor made by Texas Instruments in a PDIP-8 package with 8 pins. 0℃~+70℃ 120uA 2.7V~36V 6.52mm 9.53mm Light Intensity PDIP-8 Ambient Light Sensors ROHS.

PCBKit's library has its KiCad symbol (dk_Optical-Sensors-Ambient-Light-IR-UV-Sensors:OPT101P, from Digikey) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 1,950 are in stock at JLCPCB (part C1526918). 8 open-source boards in 5 repositories on GitHub use it.

Symbol

1VS2-IN3V-4FB5OUT8COM
dk_Optical-Sensors-Ambient-Light-IR-UV-Sensors:OPT101PFrom Digikey

Footprint

12345678
Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Pinout

8
The pins of the OPT101P
PinNameType
1VSPower in
2-INInput
3V-Power in
4FBInput
5OUTOutput
6NCNot connected
7NCNot connected
8COMInput

Open-source boards using it

8
  • 2 layers37.5 × 99 mmDiy oled 3d controller, the printed circuit board in 3D

    Diy oled 3d controller

    open3doled/open-3d-oled

    If running windows 11 or 10 with DPI scaling be sure to disable it as follows. 1) Right click properties on 3dplayer.exe in the 3DPlayer folder 2) Click on "Compatability" tab then click on the button at the bottom…

    42 parts98
  • 2 layers70 × 80 mmPpg panel, the printed circuit board in 3D

    Ppg panel

    nguyenhuy0426/PPG_simulator

    The PPG Signal Simulator is a portable device that generates synthetic PPG (photoplethysmography) waveforms with physiologically accurate morphology.

    70 parts2MIT
  • 2 layers50 × 34 mmPhotomarker, the printed circuit board in 3D

    Photomarker

    SheinbergLab/dserv

    Data server system for data acquisition and control

    31 parts2MIT
  • 2 layers52 × 81 mmPhotodiode Led Circuit, the printed circuit board in 3D

    Photodiode Led Circuit

    AlessandroLovo/T-junction

    Analysis of data from a Microfluidic T-juction. Course of Advanced Physics Laboratory @ Università degli studi di Padova

    14 parts1
  • 2 layers37.5 × 59.1 mmDiy oled 3d controller, the printed circuit board in 3D

    Diy oled 3d controller

    open3doled/open-3d-oled

    If running windows 11 or 10 with DPI scaling be sure to disable it as follows. 1) Right click properties on 3dplayer.exe in the 3DPlayer folder 2) Click on "Compatability" tab then click on the button at the bottom…

    20 parts98
  • 2 layers70 × 20 mmOpt101 receiver, the printed circuit board in 3D

    Opt101 receiver

    nguyenhuy0426/PPG_simulator

    The PPG Signal Simulator is a portable device that generates synthetic PPG (photoplethysmography) waveforms with physiologically accurate morphology.

    11 parts2MIT
  • 2 layers75 × 55 mmPhotomarker tht, the printed circuit board in 3D

    Photomarker tht

    SheinbergLab/dserv

    Data server system for data acquisition and control

    29 parts2MIT
  • 4 layers72 × 44 mmDevice, the printed circuit board in 3D

    Device

    jayis1/hardware-design-lab

    Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack

    21 parts

Parts like it

1

Questions

Is there a KiCad symbol and footprint for the OPT101P?

Yes. The symbol is dk_Optical-Sensors-Ambient-Light-IR-UV-Sensors:OPT101P and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the OPT101P?

PDIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the OPT101P datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the OPT101P?

JLCPCB lists it as part C1526918, with 1,950 in stock; the sellers' links on this page open their listings.

What can replace the OPT101P?

Parts like it in the library: the OPT101PG4 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the OPT101P?

8 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.