Skip to the content
2 layers52 × 81 mmPhotodiode Led Circuit, the printed circuit board in 3D

Photodiode Led Circuit

AlessandroLovo/T-junction1

Analysis of data from a Microfluidic T-juction. Course of Advanced Physics Laboratory @ Università degli studi di Padova

Size
52 × 81 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
11
Pads
32
Tracks, vias
58, 0
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
12 Nov 2020
Updated
1 Apr 2021

Overview

Photodiode Led Circuit is an open-source printed circuit board by AlessandroLovo, from the AlessandroLovo/T-junction repository on GitHub. It is a 2-layer board of 52 × 81 mm with 14 parts on 11 nets, routed with 58 tracks and 0 vias.

It is built around the OPT101P. Its parts include 4 resistors, 4 connectors, 2 capacitors, 1 IC and 1 diode.

Main components

1

Parts

14
QtyValueFootprintReferences
3RResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR1, R3, R4
2CCapacitor_THT:CP_Radial_Tantal_D5.0mm_P5.00mmC1, C2
2POTPotentiometer_THT:Potentiometer_ACP_CA9-H2,5_HorizontalRV1, RV2
150MResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR2
1GNDConnector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_VerticalP4
1InputConnector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_VerticalP1
1LEDLED_THT:LED_D5.0mmD1
1OPT101Package_DIP:DIP-8_W7.62mmU1
1OutputConnector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_VerticalP2
1VccConnector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_VerticalP3

Similar boards

  • 2 layers37.5 × 99 mmDiy oled 3d controller, the printed circuit board in 3D

    Diy oled 3d controller

    open3doled/open-3d-oled

    If running windows 11 or 10 with DPI scaling be sure to disable it as follows. 1) Right click properties on 3dplayer.exe in the 3DPlayer folder 2) Click on "Compatability" tab then click on the button at the bottom…

    42 parts98
  • 2 layers70 × 80 mmPpg panel, the printed circuit board in 3D

    Ppg panel

    nguyenhuy0426/PPG_simulator

    The PPG Signal Simulator is a portable device that generates synthetic PPG (photoplethysmography) waveforms with physiologically accurate morphology.

    70 parts2MIT
  • 2 layers50 × 34 mmPhotomarker, the printed circuit board in 3D

    Photomarker

    SheinbergLab/dserv

    Data server system for data acquisition and control

    31 parts2MIT
  • 4 layers72 × 44 mmDevice, the printed circuit board in 3D

    Device

    jayis1/hardware-design-lab

    Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack

    21 parts
  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0

Questions

How big is the Photodiode Led Circuit PCB?

It measures 52 × 81 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Photodiode Led Circuit use?

14 parts, built around the OPT101P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Photodiode Led Circuit KiCad files?

From the AlessandroLovo/T-junction repository on GitHub, at the commit this page was made from: the board is Elctronic_Circuit/Photodiode_Led_Circuit.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Photodiode Led Circuit design in my own project?

Its repository states no licence, so its author keeps all rights: ask AlessandroLovo before reusing the design.