Skip to the content
PCBKitNew board
OPA344PA on a board, in 3D

OPA344PA

Texas Instruments

-40℃~+85℃ 0.2pA 1 10pA 150uA 15mA 1MHz 2.5V~5.5V 200uV 30nV/√Hz@10kHz 5.5V 76dB 800V/ms 800nV/℃ Rail-to-Rail Input, Rail-to-Rail Output PDIP-8 Operational Amplifier ROHS

Extended
DatasheetJLCPCBLCSCti/OPA344PA
Category
Operational Amplifier
Package
PDIP-8
Pins
2

Overview

The OPA344PA is an operational Amplifier made by Texas Instruments in a PDIP-8 package with 8 pins. -40℃~+85℃ 0.2pA 1 10pA 150uA 15mA 1MHz 2.5V~5.5V 200uV 30nV/√Hz@10kHz 5.5V 76dB 800V/ms 800nV/℃ Rail-to-Rail Input, Rail-to-Rail Output PDIP-8 Operational Amplifier ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:OPA627BU_2K5, from EasyEDA) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 57 are in stock at JLCPCB (part C1347993). 8 open-source boards in 5 repositories on GitHub use it.

Symbol

IN+3IN-2OUT6V+7V-4NC8NC1NC5
EasyEDA_Cloud:OPA627BU_2K5From EasyEDA

Footprint

12345678
Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Parameters

16
Common Mode Rejection Ratio(CMRR)
76dB
Features
Built-in compensation
Gain Bandwidth Product
1MHz
Ib - Input Bias Current
0.2pA
Input Offset Current(Ios)
10pA
Input Offset Voltage Drift(Vos TC)
800nV/℃
Input Voltage Noise Density
30nV/√Hz@10kHz
Maximum Power Supply Range (Vdd-Vss)
5.5V
Number of Channels
1
Operating Temperature
-40℃~+85℃
Output Current
15mA
Quiescent Current
150uA
Rail to Rail
Rail-to-Rail Input, Rail-to-Rail Output
Single supply
2.5V~5.5V
Slew Rate
800V/ms
Vos - Input Offset Voltage
200uV

Order codes

1

Pinout

8
The pins of the OPA344PA
PinNameType
1NCUnspecified
2IN-Unspecified
3IN+Unspecified
4V-Unspecified
5NCUnspecified
6OUTOutput
7V+Unspecified
8NCUnspecified

Open-source boards using it

All 8
  • 2 layers88 × 88 mmFanFDD, the printed circuit board in 3D

    FanFDD

    idlehandsdev/fanFDD

    The firmware and CAD for the neural network fan fault detector.

    57 parts
  • 6 layers35 × 40 mmRtk mini, the printed circuit board in 3D

    Rtk mini

    Poppy-Robotics/rtk

    CAN enabled, RTK GNSS module for robotics based on u-blox ZED-X20P

    75 parts
  • 2 layers38 × 22 mmCurrent sensor ACS712, the printed circuit board in 3D

    Current sensor ACS712

    SolderedElectronics/Current-sensor-30A-ACS712-breakout-hardware-design

    Hardware design, BOM, gerbers and 3D files for Current-sensor-30A-ACS712-breakout designed by Soldered Electronics.

    41 parts
  • 2 layers12.4 × 23.1 mmNoise measurement, the printed circuit board in 3D

    Noise measurement

    tle-airgradient/Noise-Measurement-pcb

    Noise Measurement PCB Prototype

    21 parts
  • 2 layers38 × 22 mmCurrent sensor ACS712, the printed circuit board in 3D

    Current sensor ACS712

    SolderedElectronics/Current-sensor-30A-ACS712-breakout-hardware-design

    Hardware design, BOM, gerbers and 3D files for Current-sensor-30A-ACS712-breakout designed by Soldered Electronics.

    30 parts
  • 2 layers38 × 22 mmCurrent sensor ACS712, the printed circuit board in 3D

    Current sensor ACS712

    SolderedElectronics/Current-sensor-30A-ACS712-breakout-hardware-design

    Hardware design, BOM, gerbers and 3D files for Current-sensor-30A-ACS712-breakout designed by Soldered Electronics.

    33 parts

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/ti/OPA344PA" title="OPA344PA in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/ti/OPA344PA.jpg" alt="OPA344PA" width="1200" height="900">
A picture that opens the part, for a README
[![OPA344PA](https://pcbkit.io/embed/parts/ti/OPA344PA.jpg?size=s)](https://pcbkit.io/parts/ti/OPA344PA)

Questions

Is there a KiCad symbol and footprint for the OPA344PA?

Yes. The symbol is EasyEDA_Cloud:OPA627BU_2K5 and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the OPA344PA?

PDIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the OPA344PA datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the OPA344PA?

JLCPCB lists it as part C1347993, with 57 in stock; the sellers' links on this page open their listings.

What can replace the OPA344PA?

Parts like it in the library: the LM358N by HGSEMI, the LM358N/NOPB by Texas Instruments, the LM258P by Texas Instruments and the LM741CN/NOPB by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the OPA344PA?

8 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8