Skip to the content
12345678

OPA277UA

Texas InstrumentsExtended

-18V~-2V、2V~18V -40℃~+85℃ 0.8V/us 1 100nV/℃ 12nV/√Hz@1kHz 140dB 1MHz 1nA 1nA 20uV 35mA 800uA Built-in compensation、Reverse-phase input protection SOIC-8 Precision Op Amps ROHS

Part id
ti/OPA277UA
Category
Operational Amplifier
Package
SOIC-8
Pins
8
In stock
531 at JLCPCB (C1346180)
Used on
6 open-source boards

Overview

The OPA277UA is an operational Amplifier made by Texas Instruments in a SOIC-8 package with 8 pins. -18V~-2V、2V~18V -40℃~+85℃ 0.8V/us 1 100nV/℃ 12nV/√Hz@1kHz 140dB 1MHz 1nA 1nA 20uV 35mA 800uA Built-in compensation、Reverse-phase input protection SOIC-8 Precision Op Amps ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:OPA277PA, from EasyEDA) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 531 are in stock at JLCPCB (part C1346180). 6 open-source boards in 2 repositories on GitHub use it.

Symbol

1Offset Trim2-In3+In4V-5NC6Output7V+8Offset Trim
EasyEDA_Cloud:OPA277PAFrom EasyEDA

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the OPA277UA
PinNameType
1Offset TrimUnspecified
2-InUnspecified
3+InUnspecified
4V-Unspecified
5NCUnspecified
6OutputOutput
7V+Unspecified
8Offset TrimUnspecified

Open-source boards using it

6
  • 4 layers100 × 100 mmDemo LMP7721, the printed circuit board in 3D

    Demo LMP7721

    h-ALO/h-ALO-kicad-libs

    The sensor consist of OLED and OPD

    299 parts
  • 2 layersCircuit DEP, the printed circuit board in 3D

    Circuit DEP

    on6315/ADEPT_DEP_Module

    PCB Hardware design files and corresponding software codes for manufacturing and operating the ADEPT Dielectrophoresis platform for single cell manipulation.

    480 parts
  • 2 layers40 × 30 mmDemo LMP7721, the printed circuit board in 3D

    Demo LMP7721

    h-ALO/h-ALO-kicad-libs

    The sensor consist of OLED and OPD

    22 parts
  • 2 layers100 × 80 mmDemo LMP7721, the printed circuit board in 3D

    Demo LMP7721

    h-ALO/h-ALO-kicad-libs

    The sensor consist of OLED and OPD

    147 parts
  • 2 layers99.7 × 54.2 mmH ALO kicad libs, the printed circuit board in 3D

    H ALO kicad libs

    h-ALO/h-ALO-kicad-libs

    The sensor consist of OLED and OPD

    118 parts
  • 2 layers21 × 28 mmOffset h ALO kicad, the printed circuit board in 3D

    Offset h ALO kicad

    h-ALO/h-ALO-kicad-libs

    The sensor consist of OLED and OPD

    37 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the OPA277UA?

Yes. The symbol is EasyEDA_Cloud:OPA277PA and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the OPA277UA?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the OPA277UA datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the OPA277UA?

JLCPCB lists it as part C1346180, with 531 in stock; the sellers' links on this page open their listings.

What can replace the OPA277UA?

Parts like it in the library: the LM358D by onsemi, the LM2904D by onsemi, the NE5532D by Texas Instruments and the LM358DT by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the OPA277UA?

6 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.