Skip to the content
PCBKitNew board
OPA2210ID, in 3D

OPA2210ID

Texas Instruments

-18V~-2.25V、2.25V~18V -40℃~+125℃ 100nV/℃ 100pA 132dB 18MHz 2 2.2nV/√Hz@1kHz 2.5mA 300pA 4.5V~36V 5uV 6.4V/us 65mA ESD protection、Reverse-phase input protection Rail-to-rail output SOIC-8 Precision Op Amps ROHS

Extended
DatasheetJLCPCBLCSCti/OPA2210ID
Category
Operational Amplifier
Package
SOIC-8
Pins
8

Overview

The OPA2210ID is an operational Amplifier made by Texas Instruments in a SOIC-8 package with 8 pins. -18V~-2.25V、2.25V~18V -40℃~+125℃ 100nV/℃ 100pA 132dB 18MHz 2 2.2nV/√Hz@1kHz 2.5mA 300pA 4.5V~36V 5uV 6.4V/us 65mA ESD protection、Reverse-phase input protection Rail-to-rail output SOIC-8 Precision Op Amps ROHS.

PCBKit's library has its KiCad symbol (Gekkio_Amplifier_Operational:OPA2210ID, from Gekkio) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C1139025). 6 open-source boards in 4 repositories on GitHub use it.

Symbol

1-2+3
Gekkio_Amplifier_Operational:OPA2210IDFrom Gekkio

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Parameters

18
Common Mode Rejection Ratio(CMRR)
132dB
Dual Supply
-18V~-2.25V, 2.25V~18V
Features
Reverse-phase input protection
Gain Bandwidth Product
18MHz
Ib - Input Bias Current
300pA
Input Offset Current(Ios)
100pA
Input Offset Voltage Drift(Vos TC)
100nV/℃
Input Voltage Noise Density
2.2nV/√Hz@1kHz
Maximum Power Supply Range (Vdd-Vss)
36V
Noise density(eN)
2.2nV/√Hz@1kHz
Number of Channels
2
Operating Temperature
-40℃~+125℃
Output Current
65mA
Quiescent Current(Iq)
2.5mA
Rail to Rail
Rail-to-rail output
Single Supply
4.5V~36V
Slew Rate
6.4V/us
Vos - Input Offset Voltage
5uV

Order codes

2

Pinout

8
The pins of the OPA2210ID
PinNameType
1—Output
2-Input
3+Input
4V-Power in
5+Input
6-Input
7—Output
8V+Power in

Open-source boards using it

All 6
  • 4 layers160 × 99.5 mmHigh Current Driver, the printed circuit board in 3D

    High Current Driver

    Strathclyde-EQOP/Vernier-Current-Driver

    The Vernier Current Driver is an ultra low noise, programmable, bi-polar current source. It comes in two flavours:

    248 parts9CC-BY-SA-4.0
  • 6 layers229.2 × 100.8 mmGadas MSE Slave Module, the printed circuit board in 3D

    Gadas MSE Slave Module

    Gady159/Gadas_MSE_ELoad

    Master's thesis project by Jan Gadas: STM32 firmware, Nextion HMI and KiCad hardware design files for a modular high-power electronic load.

    576 parts
  • 4 layers127.8 × 53 mmLow Current Driver, the printed circuit board in 3D

    Low Current Driver

    Kayzerjali/FieldZero

    System to reduce the residual magnetic field inside the QUBIC lab's mu-metal shielded enclosure, allowing the QuSpin QZFM sensors to zero and lock reliably.

    73 parts
  • 4 layers270 × 100 mmInput board, the printed circuit board in 3D

    Input board

    robmacl/ilemt_hw

    Hardware design files for ILEMT position tracker

    416 parts
  • 4 layers160 × 99.5 mmLow Current Driver, the printed circuit board in 3D

    Low Current Driver

    Strathclyde-EQOP/Vernier-Current-Driver

    The Vernier Current Driver is an ultra low noise, programmable, bi-polar current source. It comes in two flavours:

    194 parts9CC-BY-SA-4.0
  • 4 layers280 × 100 mmDac board, the printed circuit board in 3D

    Dac board

    robmacl/ilemt_hw

    Hardware design files for ILEMT position tracker

    198 parts

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/ti/OPA2210ID" title="OPA2210ID in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/ti/OPA2210ID.jpg" alt="OPA2210ID" width="1200" height="900">
A picture that opens the part, for a README
[![OPA2210ID](https://pcbkit.io/embed/parts/ti/OPA2210ID.jpg?size=s)](https://pcbkit.io/parts/ti/OPA2210ID)

Questions

Is there a KiCad symbol and footprint for the OPA2210ID?

Yes. The symbol is Gekkio_Amplifier_Operational:OPA2210ID and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the OPA2210ID?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the OPA2210ID datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the OPA2210ID?

JLCPCB lists it as part C1139025, with 0 in stock; the sellers' links on this page open their listings.

What can replace the OPA2210ID?

Parts like it in the library: the TS922IDT by STMicroelectronics, the LMV358B-SR by 3PEAK, the MC33178D by onsemi and the BUF634AID by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the OPA2210ID?

6 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8