Skip to the content
12345678

OPA2171AID

Texas InstrumentsExtended

-18V~-1.35V、1.35V~18V -40℃~+125℃ 1.5V/us 1.8mV 120dB 14nV/√Hz@1kHz 15pA 2 2.7V~36V 25mA 2uV/℃ 3MHz 475uA 4pA ESD protection、EMI filtering/RF suppression Rail-to-rail output SOIC-8 Operational Amplifier ROHS

Part id
ti/OPA2171AID
Category
Operational Amplifier
Package
SOIC-8
Pins
8
In stock
29,546 at JLCPCB (C40904)
Used on
5 open-source boards

Overview

The OPA2171AID is an operational Amplifier made by Texas Instruments in a SOIC-8 package with 8 pins. -18V~-1.35V、1.35V~18V -40℃~+125℃ 1.5V/us 1.8mV 120dB 14nV/√Hz@1kHz 15pA 2 2.7V~36V 25mA 2uV/℃ 3MHz 475uA 4pA ESD protection、EMI filtering/RF suppression Rail-to-rail output SOIC-8 Operational Amplifier ROHS.

PCBKit's library has its KiCad symbol (Operational Amplifiers:Operational Amplifier x2 Type1 [alt], from CERN's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 29,546 are in stock at JLCPCB (part C40904). 5 open-source boards in 4 repositories on GitHub use it.

Symbol

84321
Operational Amplifiers:Operational Amplifier x2 Type1 [alt]From CERN's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the OPA2171AID
PinNameType
1OUTOutput
2IN-Input
3IN+Input
4V-Power in
5IN+Input
6IN-Input
7OUTOutput
8V+Power in

Open-source boards using it

5
  • 2 layers50 × 35 mmBms4 f051, the printed circuit board in 3D

    Bms4 f051

    GyrocopterLLC/bms4-rust

    Battery management system (bms) for 4 series Li-Ion cells programmed in Rust

    63 parts1MIT
  • 2 layers38.7 × 106.7 mmPeaks v30, the printed circuit board in 3D

    Peaks v30

    mort13/clandestine_circuitry

    Collection of diy synth projects

    91 parts12GPL-3.0
  • 4 layers100 × 100 mmAmod b, the printed circuit board in 3D

    Amod b

    gallicchio/AMOD-and-RFMOD

    The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…

    147 parts
  • 4 layers100 × 100 mmAmod m, the printed circuit board in 3D

    Amod m

    gallicchio/AMOD-and-RFMOD

    The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…

    207 parts
  • 2 layers100 × 28.6 mmApex3, the printed circuit board in 3D

    Apex3

    rhinocerose/eurorack-designs

    86 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the OPA2171AID?

Yes. The symbol is Operational Amplifiers:Operational Amplifier x2 Type1 [alt] and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the OPA2171AID?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the OPA2171AID datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the OPA2171AID?

JLCPCB lists it as part C40904, with 29,546 in stock; the sellers' links on this page open their listings.

What can replace the OPA2171AID?

Parts like it in the library: the LM358D by onsemi, the LM2904D by onsemi, the NE5532D by Texas Instruments and the LM358D by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the OPA2171AID?

5 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.