Skip to the content
12345678

OPA1611AID

Texas InstrumentsExtended

-18V~-2.25V、2.25V~18V -40℃~+85℃ 0.000015% 1-Channel 3.6mA ESD protection SOIC-8 Audio Amplifiers ROHS

Part id
ti/OPA1611AID
Category
Audio Amplifiers
Package
SOIC-8
Pins
8
In stock
3,747 at JLCPCB (C86723)
Used on
7 open-source boards

Overview

The OPA1611AID is an audio Amplifier made by Texas Instruments in a SOIC-8 package with 8 pins. -18V~-2.25V、2.25V~18V -40℃~+85℃ 0.000015% 1-Channel 3.6mA ESD protection SOIC-8 Audio Amplifiers ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:OPA191IDR, from EasyEDA) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 3,747 are in stock at JLCPCB (part C86723). 7 open-source boards in 6 repositories on GitHub use it.

Symbol

1NC2IN-3IN+4V-5NC6OUT7V+8NC
EasyEDA_Cloud:OPA191IDRFrom EasyEDA

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the OPA1611AID
PinNameType
1NCUnspecified
2IN-Unspecified
3IN+Unspecified
4V-Unspecified
5NCUnspecified
6OUTUnspecified
7V+Unspecified
8NCUnspecified

Open-source boards using it

7
  • 2 layers100 × 100 mmFreeDSP Catamaran, the printed circuit board in 3D

    FreeDSP Catamaran

    freeDSP/FreeDSP_Catamaran_AB

    A mono contruction Differntial 1 Input 4 output ADAU1701 DSP board, 96kHz TDM8 interlink is available.

    257 parts12CC0-1.0
  • 2 layers100 × 90 mmCurrent dr amp, the printed circuit board in 3D

    Current dr amp

    werediver/current-dr-amp

    A current drive headphone amplifier

    83 parts7
  • 6 layers160 × 145 mmMes main board, the printed circuit board in 3D

    Mes main board

    jmh8231-Dev/mes-main-board

    STM32MP257 Embedded Main Board

    736 parts3
  • 2 layers100 × 63.5 mmBalancedDriverBoard, the printed circuit board in 3D

    BalancedDriverBoard

    freeDSP/FreeDSP_Catamaran_AB

    A mono contruction Differntial 1 Input 4 output ADAU1701 DSP board, 96kHz TDM8 interlink is available.

    133 parts12CC0-1.0
  • 2 layers81.9 × 52.1 mmPre amp opa1611, the printed circuit board in 3D

    Pre amp opa1611

    schenkmi/electronic-projects

    misc electronic projects

    39 parts6CERN-OHL-W-2.0
  • 4 layers280 × 100 mmDac board, the printed circuit board in 3D

    Dac board

    robmacl/ilemt_hw

    Hardware design files for ILEMT position tracker

    198 parts
  • 4 layers90 × 90 mmPCM1704, the printed circuit board in 3D

    PCM1704

    smileym4n-collab/Kicadprojects

    143 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the OPA1611AID?

Yes. The symbol is EasyEDA_Cloud:OPA191IDR and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the OPA1611AID?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the OPA1611AID datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the OPA1611AID?

JLCPCB lists it as part C86723, with 3,747 in stock; the sellers' links on this page open their listings.

What can replace the OPA1611AID?

Parts like it in the library: the TC8002D by FM, the LM833D by onsemi, the LM4871MX by Texas Instruments and the FM8002E by Shenzhen Fuman Elec. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the OPA1611AID?

7 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.