Skip to the content
PCBKitNew board
LT1001CD on a board, in 3D

LT1001CD

Texas Instruments

-4V~22V 0℃~+70℃ 1 1.5uV/℃ 126dB 18nV/√Hz@1MHz 250V/ms 400pA 4nA 60uV SOIC-8 Operational Amplifier

Extended
DatasheetJLCPCBLCSCti/LT1001CD
Category
Operational Amplifier
Package
SOIC-8
Pins
8

Overview

The LT1001CD is an operational Amplifier made by Texas Instruments in a SOIC-8 package with 8 pins. -4V~22V 0℃~+70℃ 1 1.5uV/℃ 126dB 18nV/√Hz@1MHz 250V/ms 400pA 4nA 60uV SOIC-8 Operational Amplifier.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LT1001CD, from EasyEDA) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C4366057). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

VIO TRIM8VIO TRIM1+VCC7NC5-IN2+IN3-VCC4VOUT6
EasyEDA_Cloud:LT1001CDFrom EasyEDA

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Parameters

11
Common Mode Rejection Ratio(CMRR)
126dB
Dual Supply
-4V~22V
Ib - Input Bias Current
4nA
Input Offset Current(Ios)
400pA
Input Offset Voltage Drift(Vos TC)
1.5uV/℃
Input Voltage Noise Density
18nV/√Hz@1MHz
Maximum Power Supply Range (Vdd-Vss)
44V
Number of Channels
1
Operating Temperature
0℃~+70℃
Slew Rate
250V/ms
Vos - Input Offset Voltage
60uV

Order codes

2

Pinout

8
The pins of the LT1001CD
PinNameType
1VIO TRIMUnspecified
2-INUnspecified
3+INUnspecified
4-VCCUnspecified
5NCUnspecified
6VOUTUnspecified
7+VCCUnspecified
8VIO TRIMUnspecified

Open-source boards using it

All 2
  • 2 layers34 × 25 mmReference board, the printed circuit board in 3D

    Reference board

    TU-Darmstadt-APQ/Voltage_reference

    LM399/ADR1399 based 10 V/15 V sub-ppm stable reference

    21 parts6CERN-OHL-W-2.0
  • 4 layers100 × 100 mmLM399-Voltage Standard, the printed circuit board in 3D

    LM399-Voltage Standard

    IndexAsm/LM399-Voltage-Standard

    10V Voltage Standard used to calibrate equipment.

    118 parts

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/ti/LT1001CD" title="LT1001CD in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/ti/LT1001CD.jpg" alt="LT1001CD" width="1200" height="900">
A picture that opens the part, for a README
[![LT1001CD](https://pcbkit.io/embed/parts/ti/LT1001CD.jpg?size=s)](https://pcbkit.io/parts/ti/LT1001CD)

Questions

Is there a KiCad symbol and footprint for the LT1001CD?

Yes. The symbol is EasyEDA_Cloud:LT1001CD and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LT1001CD?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the LT1001CD datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LT1001CD?

JLCPCB lists it as part C4366057, with 0 in stock; the sellers' links on this page open their listings.

What can replace the LT1001CD?

Parts like it in the library: the LM358D by onsemi, the LM2904D by onsemi, the NE5532D by Texas Instruments and the LM358D by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LT1001CD?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8