Skip to the content
12345

LP38693MP-3.3

Texas InstrumentsExtended

-40℃~+125℃@(Tj) 1 10V 3.3V 500mA 550mV@(0.5A) 55dB@(120Hz) 55uA Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable SOT-223-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/LP38693MP-3.3
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-223-5
Pins
5
In stock
109 at JLCPCB (C130904)
Used on
14 open-source boards

Overview

The LP38693MP-3.3 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a SOT-223-5 package with 5 pins. -40℃~+125℃@(Tj) 1 10V 3.3V 500mA 550mV@(0.5A) 55dB@(120Hz) 55uA Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable SOT-223-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:LP38693MP-3.3, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-223-5, from KiCad's library), ready for a KiCad board. 109 are in stock at JLCPCB (part C130904). 14 open-source boards in 8 repositories on GitHub use it.

Symbol

1EN3OUT4IN5GND
Regulator_Linear:LP38693MP-3.3From KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-223-5From KiCad's library

Pinout

5
The pins of the LP38693MP-3.3
PinNameType
1ENInput
2NCNot connected
3OUTPower out
4INPower in
5GNDPower in

Open-source boards using it

14See all 14
  • 6 layers75 × 78.4 mmPoe backplate, the printed circuit board in 3D

    Poe backplate

    dotstartech/wall-panel

    Wall mounted 4 inch touch display panel with CM4 inside

    125 parts445
  • 6 layers157.8 × 95.2 mmCovg daq v2, the printed circuit board in 3D

    Covg daq v2

    lucask07/open_covg_daq_pcb

    DAQ (ADCs and DACs) PCB for the digital ion channel amplifier project.

    600 parts9GPL-3.0
  • 2 layers43.2 × 44.5 mmUmic, the printed circuit board in 3D

    Umic

    anfractuosity/wavecatcher

    Wavecatcher - simple board for acoustic cryptanalysis

    34 parts4
  • 4 layers112 × 57 mmUniversalboxArm1-0, the printed circuit board in 3D

    UniversalboxArm1-0

    Solartraveler/UniversalboxArm

    PCB for experimenting with a STM32

    170 parts2
  • 6 layers102.6 × 62.6 mmSPANNUNG BLE 1, the printed circuit board in 3D

    SPANNUNG BLE 1

    joeheinz/Tensosense-Schem

    This is my personal design project...

    139 parts
  • 2 layers522.8 × 310.4 mmMAG Plus, the printed circuit board in 3D

    MAG Plus

    spel-uchile/S2_S3_PS_MAG_PCBs

    A summary of the different MAG derived PCBs used in SUCHAI 2, SUCHAI 3 and Plansat Satellites

    228 parts
  • 4 layers25.8 × 35.7 mmRcbuggtelem, the printed circuit board in 3D

    Rcbuggtelem

    tomo900/BuggyIMU_PCBA

    47 parts
  • 2 layers32 × 49 mmEsp32c3, the printed circuit board in 3D

    Esp32c3

    YORROY123/kicad-scripted-pcb

    Three KiCad 10 PCBs designed entirely as Python code with layered verification

    26 parts1MIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LP38693MP-3.3?

Yes. The symbol is Regulator_Linear:LP38693MP-3.3 and the footprint Package_TO_SOT_SMD:SOT-223-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LP38693MP-3.3?

SOT-223-5, with 5 pins. Its footprint is drawn on this page.

Where is the LP38693MP-3.3 datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LP38693MP-3.3?

JLCPCB lists it as part C130904, with 109 in stock; the sellers' links on this page open their listings.

What can replace the LP38693MP-3.3?

Parts like it in the library: the LP38692MPX-3.3 by Texas Instruments, the LP3875EMP-3.3 by Texas Instruments, the LP38692MP-3.3 by Texas Instruments and the LP38693MPX-3.3 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LP38693MP-3.3?

14 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.