Skip to the content
12345

LP2985A-33DBV

Texas InstrumentsExtended

-40℃~+125℃@(Tj) 1 150mA 16V 3.3V 30uVrms 45dB@(1kHz) 575mV@(150mA) 850uA Fixed Over Current Protection、Over Temperature Protection、Enable、Short Circuit Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/LP2985A-33DBV
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-23-5
Pins
5
In stock
16,756 at JLCPCB (C89826)

Overview

The LP2985A-33DBV is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a SOT-23-5 package with 5 pins. -40℃~+125℃@(Tj) 1 150mA 16V 3.3V 30uVrms 45dB@(1kHz) 575mV@(150mA) 850uA Fixed Over Current Protection、Over Temperature Protection、Enable、Short Circuit Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulators:LP2985, from CERN's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 16,756 are in stock at JLCPCB (part C89826).

Symbol

1VIN3ON/OFF4BYP5VOUT2GND
Regulators:LP2985From CERN's library

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

From the datasheet

15
Supply, least
2.2 V · VIN, recommended operating, legacy chip, min · p. 4
Supply, most
16 V · VIN, recommended operating, legacy chip, max · p. 4
Supply, absolute maximum
16 V · VIN, absolute maximum, legacy chip · p. 4
Works from
-40 °C · Operating ambient temperature, min · p. 16
Works up to
125 °C · Operating ambient temperature, max · p. 16
Junction, hottest
150 °C · Junction temperature, absolute max · p. 4
Takes working
65 µA · GND quiescent current, output enabled, IOUT = 0 mA, 25°C, legacy chip, typical · p. 7
Takes asleep
10 nA · Shutdown GND current, VON/OFF < 0.3 V, VIN = 16 V, 25°C, legacy chip, typical · p. 7
Gives
150 mA · Continuous output current, max · p. 4
Current limit
350 mA · Peak output current, VOUT ≥ VO(NOM) −5%, steady state, legacy chip, typical · p. 8
Output
3.3 V · Fixed output, option 33, nominal typical · p. 29
Dropout
280 mV · IOUT = 150 mA, 25°C, legacy chip, typical · p. 6
Junction to air (DBV (SOT23-5))
205.4 K/W · Junction to ambient, legacy chip, typical · p. 5
Junction to board (DBV (SOT23-5))
46.7 K/W · Junction to board, legacy chip, typical · p. 5
Junction to case (DBV (SOT23-5))
78.8 K/W · Junction to case top, legacy chip, typical · p. 5

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LP2985A-33DBV?

Yes. The symbol is Regulators:LP2985 and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LP2985A-33DBV?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the LP2985A-33DBV datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LP2985A-33DBV?

JLCPCB lists it as part C89826, with 16,756 in stock; the sellers' links on this page open their listings.

What can replace the LP2985A-33DBV?

Parts like it in the library: the ME6211C33M5G-N by MICRONE, the SPX3819M5-L-3-3/TR by MaxLinear, the RT9013-33GB by RICHTEK and the XC6219B332MR by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.