Skip to the content
123456789101112131415

LM5156HPWP

Texas InstrumentsExtended

-40℃~+150℃@(TJ) 1 100kHz~2.2MHz 2.97V~60V 490uA Adjustable Boost Boost、SEPIC、Flyback External No Overcurrent Protection、Adjustable soft-start、Operating status indication、Cycle-by-cycle current limiting、Frequency synchronization、Hiccup current limiting、EMI optimization (spread spectrum) HTSSOP-14-EP DC-DC Converters ROHS

Part id
ti/LM5156HPWP
Category
DC DC Converters
Package
HTSSOP-14-EP
Pins
15
In stock
2,955 at JLCPCB (C2867852)
Used on
3 open-source boards

Overview

The LM5156HPWP is a DC DC Converter made by Texas Instruments in a HTSSOP-14-EP package with 15 pins. -40℃~+150℃@(TJ) 1 100kHz~2.2MHz 2.97V~60V 490uA Adjustable Boost Boost、SEPIC、Flyback External No Overcurrent Protection、Adjustable soft-start、Operating status indication、Cycle-by-cycle current limiting、Frequency synchronization、Hiccup current limiting、EMI optimization (spread spectrum) HTSSOP-14-EP DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (Regulator_Switching:LM5156HPWP, from KiCad's library) and its footprint (Package_SO:Texas_HTSSOP-14-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask3.155x3.255mm, from KiCad's library), ready for a KiCad board. 2,955 are in stock at JLCPCB (part C2867852). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

1BIAS3VCC4GATE5PGND6AGND7CS8COMP9DITHOFF10FB11SS12RT13PGOOD14EN/UVLO/SYNC
Regulator_Switching:LM5156HPWPFrom KiCad's library

Footprint

123456789101112131415
Package_SO:Texas_HTSSOP-14-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask3.155x3.255mmFrom KiCad's library

Pinout

15
The pins of the LM5156HPWP
PinNameType
1BIASPower in
2NCNot connected
3VCCPower out
4GATEOutput
5PGNDPower in
6AGNDPower in
7CSInput
8COMPOutput
9DITHOFFInput
10FBInput
11SSInput
12RTInput
13PGOODOpen collector
14EN/UVLO/SYNCInput
15AGNDPassive

Open-source boards using it

3
  • 2 layers49 × 31 mmLM5155-flyback, the printed circuit board in 3D

    LM5155-flyback

    bartlettD/nixie-clock

    A Nixie Tube based clock. Because everyone has to play with Nixies once, right?

    33 parts1
  • 2 layers100 × 85 mmDekatron, the printed circuit board in 3D

    Dekatron

    kuvychko/universal-nixie-display

    Six IN-14 Nixie tubes, an A101 dekatron and an ESP32 touchscreen in one desktop display: a clock, timer and toy, and a numeric display for a computer over USB.

    165 parts1
  • 2 layers85 × 55 mmNixie clock, the printed circuit board in 3D

    Nixie clock

    jason-watkins/nixie-clock

    USB-C powered nixie tube clock. Four IN-12B digits, two INS-1 colon lamps, K155ID1 BCD decoder/drivers.

    52 partsCC-BY-SA-4.0

Parts like it

5

Questions

Is there a KiCad symbol and footprint for the LM5156HPWP?

Yes. The symbol is Regulator_Switching:LM5156HPWP and the footprint Package_SO:Texas_HTSSOP-14-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask3.155x3.255mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM5156HPWP?

HTSSOP-14-EP, with 15 pins. Its footprint is drawn on this page.

Where is the LM5156HPWP datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LM5156HPWP?

JLCPCB lists it as part C2867852, with 2,955 in stock; the sellers' links on this page open their listings.

What can replace the LM5156HPWP?

Parts like it in the library: the LM3150MHX by Texas Instruments, the LM5161PWP by Texas Instruments, the LM51561HPWP by Texas Instruments and the LM3150MH by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LM5156HPWP?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.