Skip to the content
1234

LM1086CS-3.3

Texas InstrumentsExtended

0℃~+125℃ 1 1.5A 1.5V 18V 3.3V 5mA 72dB@(1kHz) Fixed Over Current Protection、Thermal Shutdown Positive TO-263-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/LM1086CS-3.3
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TO-263-3
Pins
4
In stock
431 at JLCPCB (C14089)
Used on
3 open-source boards

Overview

The LM1086CS-3.3 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a TO-263-3 package with 4 pins. 0℃~+125℃ 1 1.5A 1.5V 18V 3.3V 5mA 72dB@(1kHz) Fixed Over Current Protection、Thermal Shutdown Positive TO-263-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:APL1117-18VC-TRG, from EasyEDA) and its footprint (Package_TO_SOT_SMD:TO-263-3_TabPin4, from KiCad's library), ready for a KiCad board. 431 are in stock at JLCPCB (part C14089). 3 open-source boards in 2 repositories on GitHub use it.

Symbol

1ADJ/GND2VOUT3VIN4VOUT
EasyEDA_Cloud:APL1117-18VC-TRGFrom EasyEDA

Footprint

1234
Package_TO_SOT_SMD:TO-263-3_TabPin4From KiCad's library

Pinout

4
The pins of the LM1086CS-3.3
PinNameType
1ADJ/GNDUnspecified
2VOUTUnspecified
3VINUnspecified
4VOUTUnspecified

Open-source boards using it

3
  • 2 layers254 × 134.1 mmS100 B1FU, the printed circuit board in 3D

    S100 B1FU

    CatspersCoffee/S100-Boards

    S-100 bus boards designed and built: Z80 and 80386 CPU cards, SRAM/DRAM memory, CPLD/FPGA I/O and SPI boards, an 18-slot backplane and bus terminator.

    164 parts
  • 4 layers180 × 67 mmTbc, the printed circuit board in 3D

    Tbc

    philmcm/tbc

    130 parts
  • 2 layers254 × 134.1 mmS10 PIC SPI v1, the printed circuit board in 3D

    S10 PIC SPI v1

    CatspersCoffee/S100-Boards

    S-100 bus boards designed and built: Z80 and 80386 CPU cards, SRAM/DRAM memory, CPLD/FPGA I/O and SPI boards, an 18-slot backplane and bus terminator.

    163 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LM1086CS-3.3?

Yes. The symbol is EasyEDA_Cloud:APL1117-18VC-TRG and the footprint Package_TO_SOT_SMD:TO-263-3_TabPin4, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM1086CS-3.3?

TO-263-3, with 4 pins. Its footprint is drawn on this page.

Where is the LM1086CS-3.3 datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LM1086CS-3.3?

JLCPCB lists it as part C14089, with 431 in stock; the sellers' links on this page open their listings.

What can replace the LM1086CS-3.3?

Parts like it in the library: the LM1084S-3.3/TR by HGSEMI, the LD1085D2M33R by STMicroelectronics, the UZ1085L-33-TQ3-R by UTC and the AMS1086CM-3.3 by Advanced Monolithic Systems. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LM1086CS-3.3?

3 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.