Skip to the content
PCBKitNew board
LF353P, in 3D

LF353P

Texas Instruments

-18V~-3.5V、3.5V~18V 0℃~+70℃ 100pA 10uV/℃ 13V/us 18nV/√Hz@1kHz 3.6mA 3MHz 50pA 5mV 70dB Short-Circuit Protection DIP-8 FET Input Amplifiers ROHS

Extended
DatasheetJLCPCBLCSCti/LF353P
Category
FET Input Amplifiers
Package
DIP-8
Pins
8

Overview

The LF353P is a FET Input Amplifier made by Texas Instruments in a DIP-8 package with 8 pins. -18V~-3.5V、3.5V~18V 0℃~+70℃ 100pA 10uV/℃ 13V/us 18nV/√Hz@1kHz 3.6mA 3MHz 50pA 5mV 70dB Short-Circuit Protection DIP-8 FET Input Amplifiers ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TL072MJG, from EasyEDA) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 96 are in stock at JLCPCB (part C5207). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

VCC+81OUT1VCC-41IN+31IN-2
EasyEDA_Cloud:TL072MJGFrom EasyEDA

Footprint

12345678
Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Parameters

12
Common Mode Rejection Ratio(CMRR)
70dB
Dual Supply
-18V~-3.5V
Features
Short-Circuit Protection
Gain Bandwidth Product
3MHz
Ib - Input Bias Current
50pA
Input Offset Current(Ios)
100pA
Input Offset Voltage Drift(Vos TC)
10uV/℃
Noise density(eN)
18nV/√Hz@1kHz
Operating Temperature
0℃~+70℃
Quiescent Current(Iq)
3.6mA
Slew Rate
13V/us
Vos - Input Offset Voltage
5mV

Order codes

1

Pinout

8
The pins of the LF353P
PinNameType
11OUTOutput
21IN-Unspecified
31IN+Unspecified
4VCC-Unspecified
52IN+Unspecified
62IN-Unspecified
72OUTOutput
8VCC+Unspecified

Open-source boards using it

All 3
  • 4 layers223 × 226 mmApple PCB 820-0086-C, the printed circuit board in 3D

    Apple PCB 820-0086-C

    RichCini/MacRedux

    Redraws/reimplementations of various legacy Macintosh boards.

    186 parts4
  • 6 layers304.8 × 243.8 mmHydra-16, the printed circuit board in 3D

    Hydra-16

    danstruthers/hydra-16

    6502-based multi-tasking hardware and software project

    210 parts1
  • 2 layers36 × 26 mmChemE, the printed circuit board in 3D

    ChemE

    CalebJM04/ChemE-Car-

    op amp circuit for the cheme car club

    12 parts

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/ti/LF353P" title="LF353P in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/ti/LF353P.jpg" alt="LF353P" width="1200" height="900">
A picture that opens the part, for a README
[![LF353P](https://pcbkit.io/embed/parts/ti/LF353P.jpg?size=s)](https://pcbkit.io/parts/ti/LF353P)

Questions

Is there a KiCad symbol and footprint for the LF353P?

Yes. The symbol is EasyEDA_Cloud:TL072MJG and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LF353P?

DIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the LF353P datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LF353P?

JLCPCB lists it as part C5207, with 96 in stock; the sellers' links on this page open their listings.

What can replace the LF353P?

Parts like it in the library: the TL072CP by Texas Instruments, the TL081CP by Texas Instruments, the TL071CP by Texas Instruments and the TL072IP by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LF353P?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8