
Apple PCB 820-0086-C
RichCini/MacRedux
Redraws/reimplementations of various legacy Macintosh boards.

op amp circuit for the cheme car club
ChemE is an open-source printed circuit board by CalebJM04, from the CalebJM04/ChemE-Car- repository on GitHub. It is a 2-layer board of 36 × 26 mm with 12 parts on 15 nets, routed with 42 tracks and 0 vias.
It is built around the LF353P, LM393N and 3296W-1-103LF, with the IRLZ44NPBF among its other parts. Its parts include 4 resistors, 2 ICs, 2 diodes, 1 transistor and 1 connector.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R2, R3 |
| 1 | 1N4004 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D2 |
| 1 | 3296W-1-103LF | step:POT_3296W | R4 |
| 1 | 470k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R1 |
| 1 | Circuit Battery | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | D_Photo | OptoDevice:Osram_BPW82 | D1 |
| 1 | IRLZ44NPBF | mosfet:TO254P469X1042X1967-3P | Q2 |
| 1 | LF353P | op amp:DIP794W53P254L959H508Q8N | IC1 |
| 1 | LM393N | comparator:DIP794W45P254L959H508Q8 | U1 |
| 1 | Motor | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | motor1 |
| 1 | Motor battery | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | motor_car1 |

RichCini/MacRedux
Redraws/reimplementations of various legacy Macintosh boards.



0hasant/Liion_Cell_Simulator
Single-cell characterization bench for 18650 and 21700 Li-ion cells (DMEGC INR45E, generic 3.5 Ah 18650). Part of the Solaris final-year project.


Iva0108/Rain-Sense
PCB design as well as case design for a rain sensor. KiCad and FreeCad.


theznerd/FullSheetCurlingTimer
An exploration of ESP32, Bluetooth GATT, and ESP-NOW to create a full-sheet curling timer for practice.
It measures 36 × 26 mm and has 2 copper layers, 1.6 mm thick.
12 parts, built around the LF353P, LM393N, 3296W-1-103LF and IRLZ44NPBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CalebJM04/ChemE-Car- repository on GitHub, at the commit this page was made from: the board is ChemE/ChemE.kicad_pcb and its schematic ChemE/ChemE.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask CalebJM04 before reusing the design.