Skip to the content
PCBKitNew board
TL072CP on a board, in 3D

TL072CP

Texas Instruments

-15V~15V 0℃~+70℃ 1.4mA 100pA 13V/us 18nV/√Hz@1kHz 18uV/℃ 2 3MHz 3mV 65pA 70dB Short-Circuit Protection、Built-in compensation、Latch-up suppression PDIP-8 FET Input Amplifiers ROHS

Extended
DatasheetJLCPCBLCSCti/TL072CP
Category
FET Input Amplifiers
Package
PDIP-8
Pins
8

Overview

The TL072CP is a FET Input Amplifier made by Texas Instruments in a PDIP-8 package with 8 pins. -15V~15V 0℃~+70℃ 1.4mA 100pA 13V/us 18nV/√Hz@1kHz 18uV/℃ 2 3MHz 3mV 65pA 70dB Short-Circuit Protection、Built-in compensation、Latch-up suppression PDIP-8 FET Input Amplifiers ROHS.

PCBKit's library has its KiCad symbol (Amplifier_Operational:TL072, from KiCad's library) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 4,958 are in stock at JLCPCB (part C7236). 19 open-source boards in 16 repositories on GitHub use it.

Symbol

1-2+3
Amplifier_Operational:TL072From KiCad's library

Footprint

12345678
Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

From the datasheet

9
Supply, least
4.5 V · VCC+ – VCC–, recommended operating min · p. 11
Supply, most
40 V · VCC+ – VCC–, recommended operating max · p. 11
Supply, absolute maximum
42 V · VCC+ – VCC–, absolute max · p. 10
Works from
0 °C · TA, specified operating min, TL07xC · p. 11
Works up to
70 °C · TA, specified operating max, TL07xC · p. 11
Junction, hottest
150 °C · TJ, absolute max · p. 10
Takes working
2.8 mA · sum of two amplifiers' typical quiescent currents, VO = 0 V, no load, supplies ±15 V · p. 16
Takes at most
5 mA · sum of two amplifiers' max quiescent currents, VO = 0 V, no load, supplies ±15 V · p. 16
Junction to air (P (PDIP))
85 K/W · junction-to-ambient thermal resistance · p. 11

What it is and has

4
Amplifier type
Low-noise, FET-input operational amplifier · p. 1
Channels
Dual · p. 1
Package
P (PDIP, 8) · p. 1
Protection
Output short-circuit protection · p. 1

Specifications

41
ParameterConditionsAs printedPage
Supply voltage, VS = (V+) – (V–) VSAll other devices; TL072CPmin 0 · max 42 V10
Signal input pins CurrentAll other devicesmin -10 · max 10 mA10
Operating ambient temperature TAmin -55 · max 150 °C10
Junction temperature TJmax 150 °C10
Lead temperature 1.8 mm (1/16 inch) from case for 10 secondsmax 300 °C10
Storage temperature Tstgmin -65 · max 150 °C10
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; ±2000 Vmax 2000 V10
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22-C101; ±1000 Vmax 1000 V10
Supply voltage, (VCC+) – (VCC–) VSAll other devices; TL072CPmin 4.5 · max 40 V11
Specified temperature TATL07xCmin 0 · max 70 °C11
Junction-to-ambient thermal resistance RθJATL072xx, P (PDIP), 8 PINStyp 85 °C/W11
Input offset voltage VOSTL07xC; VO = 0 V, RS = 50 Ω, supplies ±15 V, TA = 25°Ctyp 3 · max 10 mV15
Input offset voltage VOSTL07xC; VO = 0 V, RS = 50 Ω, supplies ±15 V, TA = Full rangemax 13 mV15
Input offset voltage drift dVOS/dTVO = 0 V, RS = 50 Ω, supplies ±15 V, TA = Full range; typical ±18 uV/℃typ 18 uV/℃15
Input offset current IOSTL07xC; VO = 0 V, supplies ±15 V, TA = 25°Ctyp 5 · max 100 pA15
Input offset current IOSTL07xC; VO = 0 V, supplies ±15 V, TA = Full rangemax 10 nA15
Input bias current IBTL07xC; VO = 0 V, supplies ±15 V, TA = 25°Ctyp 65 · max 200 pA15
Input bias current IBTL07xC; VO = 0 V, supplies ±15 V, TA = Full rangemax 7 nA15
Common-mode voltage VCMSupplies ±15 V, TA = 25°C; minimum range ±11 V; typical range –12 to 15 Vmin 11 V15
Maximum peak output voltage swing VOMRL = 10 kΩ, supplies ±15 V, TA = 25°C; symmetric ± valuesmin 12 · typ 13.5 V15
Maximum peak output voltage swing VOMRL ≥ 10 kΩ, supplies ±15 V, TA = Full range; symmetric ± valuesmin 12 V15
Maximum peak output voltage swing VOMRL ≥ 2 kΩ, supplies ±15 V, TA = Full range; symmetric ± valuesmin 10 V15
Open-loop voltage gain AOLTL07xC; VO = 0 V, supplies ±15 V, TA = 25°Cmin 25 · typ 200 V/mV15
Open-loop voltage gain AOLTL07xC; VO = 0 V, supplies ±15 V, TA = Full rangemin 15 V/mV15
Gain-bandwidth product GBWAll other devices; TL072CP, supplies ±15 V, TA = 25°Ctyp 5.25 MHz15
Common-mode input resistance RIDSupplies ±15 V, TA = 25°Ctyp 1 TΩ15
Common-mode rejection ratio CMRRTL07xC; VIC = VICR(min), VO = 0 V, RS = 50 Ω, supplies ±15 V, TA = 25°Cmin 70 · typ 100 dB15
Input offset voltage versus power supply PSRRTL07xC; VS = ±9 V to ±18 V, VO = 0 V, RS = 50 Ω, TA = 25°Cmin 70 · typ 100 dB15
Quiescent current per amplifier IQVO = 0 V, no load, supplies ±15 V, TA = 25°Ctyp 1.4 · max 2.5 mA16
Channel separationf = 0 Hz, supplies ±15 V, TA = 25°Ctyp 1 uV/V16
Slew rate SRTL07xC; VI = 10 V, CL = 100 pF, RL = 2 kΩ, supplies ±15 V, TA = 25°Cmin 8 · typ 20 V/us16
Settling time tSVI = 20 V, CL = 100 pF, RL = 2 kΩ, supplies ±15 V, TA = 25°Ctyp 0.1 us16
Input voltage noise density eNAll other devices; f = 1 kHz, supplies ±15 V, TA = 25°Ctyp 37 nV/√Hz16
Input voltage noise density eNAll other devices; f = 10 kHz, supplies ±15 V, TA = 25°Ctyp 21 nV/√Hz16
Input voltage noise ENAll other devices; f = 0.1 Hz to 10 Hz, supplies ±15 V, TA = 25°Ctyp 1.4 uVRMS16
Input current noise iNRS = 20 Ω, f = 1 kHz, supplies ±15 V, TA = 25°Ctyp 10 fA/√Hz16
Phase marginTL07xC; G = +1, RL = 10kΩ, CL = 20 pF, supplies ±15 V, TA = 25°Ctyp 56 °16
Overload recovery timeVIN × gain > VS, supplies ±15 V, TA = 25°Ctyp 300 ns16
Total harmonic distortion + noise THD+NAll other devices; VS = 40 V, VO = 6 VRMS, G = +1, f = 1 kHz, TA = 25°Ctyp 0.00012 %16
EMI rejection ratio EMIRRTL07xC; f = 1 GHz, supplies ±15 V, TA = 25°Ctyp 53 dB16
Open-loop output impedance ZOTL07xC; f = 1 MHz, IO = 0 A, supplies ±15 V, TA = 25°Ctyp 125 Ω16

Parameters

19
Common Mode Rejection Ratio(CMRR)
70dB
Current - Supply
2.8mA
Current - Supply(Max)
5mA
Dual Supply
-15V~15V
Features
Latch-up suppression
Gain Bandwidth Product
3MHz
Ib - Input Bias Current
65pA
Input Offset Current(Ios)
100pA
Input Offset Voltage Drift(Vos TC)
18uV/℃
Junction Temperature(Max)
150℃
Noise density(eN)
18nV/√Hz@1kHz
Number of Channels
2
Operating Temperature
0℃~+70℃
Quiescent Current(Iq)
1.4mA
Slew Rate
13V/us
Thermal Resistance(Junction to Ambient)
85℃/W
Voltage - Supply
4.5V~40V
Voltage - Supply(Absolute Max)
42V
Vos - Input Offset Voltage
3mV

Order codes

1

Pinout

8
The pins of the TL072CP
PinNameType
1—Output
2-Input
3+Input
4V-Power in
5+Input
6-Input
7—Output
8V+Power in

Open-source boards using it

All 19
  • 2 layers19.7 × 99.1 mmMain pcb, the printed circuit board in 3D

    Main pcb

    Testbild-synth/HAGIWO_arduino_oscillator

    4HP through hole version of the HAGIWO FM/additive/chord oscillator with mode switch and gain input.

    40 parts57MIT
  • 2 layers181.5 × 128.5 mmAndes 10HP, the printed circuit board in 3D

    Andes 10HP

    niektb/sluisbrinkie-eurorack-published

    Published Modules of the Sluisbrinkie project

    158 parts34
  • 4 layers158.5 × 57 mmGuitarAmplifier, the printed circuit board in 3D

    GuitarAmplifier

    RoMadrigal/GuitarAmplifier-PCB-IE0308

    Repositorio para el proyecto final del curso IE0308 sobre el diseño de una PCB de un amplificador para guitarra.

    48 parts3MIT
  • 2 layers100 × 60 mmLopielle, the printed circuit board in 3D

    Lopielle

    andreasimonetto/lopielle

    MIDI synth based on Yamaha OPLL FM synthesis sound chip (YM2413)

    49 parts2
  • 4 layers70.8 × 110 mmPipes sub, the printed circuit board in 3D

    Pipes sub

    shannon-greenlight/pipes

    8 Harmonic tracking oscillator

    303 parts2
  • 2 layers26 × 22 mmFaradometer, the printed circuit board in 3D

    Faradometer

    everyone-else-stole-the-good-usernames/ICLR-Faradometer

    Op Amp Capacitance to Voltage circuit

    22 parts1
  • 4 layers60.4 × 110 mmSpankulator, the printed circuit board in 3D

    Spankulator

    shannon-greenlight/spankulator

    The Spankulator is a WiFi-enabled multi-function Eurorack module. Its main function is to generate a trio of coordinated analog and digital signals which can be used in an endless variety of ways.

    107 parts1

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/ti/TL072CP" title="TL072CP in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/ti/TL072CP.jpg" alt="TL072CP" width="1200" height="900">
A picture that opens the part, for a README
[![TL072CP](https://pcbkit.io/embed/parts/ti/TL072CP.jpg?size=s)](https://pcbkit.io/parts/ti/TL072CP)

Questions

Is there a KiCad symbol and footprint for the TL072CP?

Yes. The symbol is Amplifier_Operational:TL072 and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TL072CP?

PDIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the TL072CP datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TL072CP?

JLCPCB lists it as part C7236, with 4,958 in stock; the sellers' links on this page open their listings.

What can replace the TL072CP?

Parts like it in the library: the TL081CP by Texas Instruments, the TL071CP by Texas Instruments, the TL072IP by Texas Instruments and the TL072CN(LX) by lingxingic. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TL072CP?

19 boards in 16 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8