Skip to the content
PCBKitNew board
INA286AID on a board, in 3D

INA286AID

Texas Instruments

-14V~80V -40℃~+125℃ 0.3uV/℃ 1 100V/V 110nV/√Hz@1kHz 140dB 2.7V~18V 20uV 25uA 2kHz 600uA High-side detection、Low-side detection、Bidirectional detection、Zero drift / auto-zero、Programmable output reference level ±5V SOIC-8 Current Sense Amplifiers ROHS

Extended
DatasheetJLCPCBLCSCti/INA286AID
Category
Current Sense Amplifiers
Package
SOIC-8
Pins
8

Overview

The INA286AID is a current Sense Amplifier made by Texas Instruments in a SOIC-8 package with 8 pins. -14V~80V -40℃~+125℃ 0.3uV/℃ 1 100V/V 110nV/√Hz@1kHz 140dB 2.7V~18V 20uV 25uA 2kHz 600uA High-side detection、Low-side detection、Bidirectional detection、Zero drift / auto-zero、Programmable output reference level ±5V SOIC-8 Current Sense Amplifiers ROHS.

PCBKit's library has its KiCad symbol (Amplifier_Current:INA286, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 1,000 are in stock at JLCPCB (part C181640). 2 open-source boards in 1 repository on GitHub use it.

Symbol

-1GND2REF235V+6REF17+8
Amplifier_Current:INA286From KiCad's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Parameters

14
Bandwidth
2kHz
Common Mode Rejection Ratio (CMRR)
140dB
Differential Voltage
±5V
Features
Analog output interface
Gain
100V/V
Ib - Input Bias Current
25uA
Input Offset Voltage Drift(Vos TC)
0.3uV/℃
Noise density(eN)
110nV/√Hz@1kHz
Number of Channels
1
Operating Temperature
-40℃~+125℃
Quiescent Current
600uA
Single Supply
2.7V~18V
Vcm - Common Mode Voltage
-14V~80V
Vos - Input Offset Voltage
20uV

Order codes

2

Pinout

8
The pins of the INA286AID
PinNameType
1-Input
2GNDPower in
3REF2Input
4NCNot connected
5—Output
6V+Input
7REF1Input
8+Input

Open-source boards using it

All 2
  • 4 layers102.8 × 67 mmEntegre fc, the printed circuit board in 3D

    Entegre fc

    ErdemA33/stm32f405-flight-controller

    Open-source ArduPilot-compatible flight controller for fixed-wing UAVs. STM32F405, 4-layer KiCad design, built in 5 modular stages.

    129 parts3
  • 4 layers69.9 × 75.7 mmPower board, the printed circuit board in 3D

    Power board

    ErdemA33/stm32f405-flight-controller

    Open-source ArduPilot-compatible flight controller for fixed-wing UAVs. STM32F405, 4-layer KiCad design, built in 5 modular stages.

    56 parts3

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/ti/INA286AID" title="INA286AID in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/ti/INA286AID.jpg" alt="INA286AID" width="1200" height="900">
A picture that opens the part, for a README
[![INA286AID](https://pcbkit.io/embed/parts/ti/INA286AID.jpg?size=s)](https://pcbkit.io/parts/ti/INA286AID)

Questions

Is there a KiCad symbol and footprint for the INA286AID?

Yes. The symbol is Amplifier_Current:INA286 and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the INA286AID?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the INA286AID datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the INA286AID?

JLCPCB lists it as part C181640, with 1,000 in stock; the sellers' links on this page open their listings.

What can replace the INA286AID?

Parts like it in the library: the INA219AID by Texas Instruments, the INA240A1D by Texas Instruments, the CSA240LCSOIC8 by analogysemi and the MAX4080TASA+T by Maxim Integrated (Analog Devices). Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the INA286AID?

2 boards in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8