
ICL7107CPL
Texas InstrumentsExtended
0℃~+70℃ 4.75V~5.25V PDIP-40 Digital Tube Drivers
- Part id
- ti/ICL7107CPL
- Category
- Digital Tube Drivers
- Package
- PDIP-40
- Pins
- 40
- In stock
- 0 at JLCPCB (C3191458)
- Used on
- 4 open-source boards
Overview
The ICL7107CPL is a digital Tube Driver made by Texas Instruments in a PDIP-40 package with 40 pins. 0℃~+70℃ 4.75V~5.25V PDIP-40 Digital Tube Drivers.
PCBKit's library has its KiCad symbol (Analog_ADC:ICL7107CPL, from KiCad's library) and its footprint (Package_DIP:DIP-40_W15.24mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C3191458). 4 open-source boards in 3 repositories on GitHub use it.
Symbol
Footprint
Pinout
40| Pin | Name | Type |
|---|---|---|
| 1 | V+ | Power in |
| 2 | D1 | Output |
| 3 | C1 | Output |
| 4 | B1 | Output |
| 5 | A1 | Output |
| 6 | F1 | Output |
| 7 | G1 | Output |
| 8 | E1 | Output |
| 9 | D2 | Output |
| 10 | C2 | Output |
| 11 | B2 | Output |
| 12 | A2 | Output |
| 13 | F2 | Output |
| 14 | E2 | Output |
| 15 | D3 | Output |
| 16 | B3 | Output |
| 17 | F3 | Output |
| 18 | E3 | Output |
| 19 | AB4 | Output |
| 20 | POL | Output |
| 21 | BP/GND | Input/output |
| 22 | G3 | Output |
| 23 | A3 | Output |
| 24 | C3 | Output |
| 25 | G2 | Output |
| 26 | V- | Power in |
| 27 | INT | Passive |
| 28 | BUFF | Output |
| 29 | A-Z | Passive |
| 30 | IN_LO | Input |
| 31 | IN_HI | Input |
| 32 | COMMON | Output |
| 33 | CREF- | Passive |
| 34 | CREF+ | Passive |
| 35 | REF_LO | Passive |
| 36 | REF_HI | Passive |
| 37 | TEST | Passive |
| 38 | OSC3 | Passive |
| 39 | OSC2 | Passive |
| 40 | OSC1 | Passive |
Open-source boards using it
4- 2 layers100 × 100 mm

- 2 layers137.2 × 77.5 mm

Thermometer mainboard
jammycakes/thing-for-measuring-things
A revival of a project I first attempted when I was sixteen
43 parts - 2 layers89.8 × 112.8 mm

Projekat
SrdjanEM/True-RMS-voltmeter
True RMS voltmeter for AC voltage measurments up to 1000 V. Includes ESD protection and overvoltage protection.
77 parts - 2 layers71.1 × 72.4 mm

Circuits
jammycakes/thing-for-measuring-things
A revival of a project I first attempted when I was sixteen
31 parts
Questions
Is there a KiCad symbol and footprint for the ICL7107CPL?
Yes. The symbol is Analog_ADC:ICL7107CPL and the footprint Package_DIP:DIP-40_W15.24mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the ICL7107CPL?
PDIP-40, with 40 pins. Its footprint is drawn on this page.
Where is the ICL7107CPL datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the ICL7107CPL?
JLCPCB lists it as part C3191458, with 0 in stock; the sellers' links on this page open their listings.
Which open-source boards use the ICL7107CPL?
4 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.