Skip to the content
2 layers137.2 × 77.5 mmThermometer mainboard, the printed circuit board in 3D

A revival of a project I first attempted when I was sixteen

Size
137.2 × 77.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
43
Nets
71
Pads
184
Tracks, vias
261, 0
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
30 Nov 2023
Updated
17 Jan 2024

Overview

Thermometer mainboard is an open-source printed circuit board by jammycakes, from the jammycakes/thing-for-measuring-things repository on GitHub. It is a 2-layer board of 137.2 × 77.5 mm with 43 parts on 71 nets, routed with 261 tracks and 0 vias.

It is built around the ICL7107CPL and LM285Z-1.2. Its parts include 13 resistors, 11 capacitors, 4 ICs, 3 connectors and 2 diodes. It belongs with the sensors and measurement and computers and single-board computers boards of this library.

Main components

2

Parts

43
QtyValueFootprintReferences
447nFCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC4, C7, C10, C11
4620RResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR10, R11, R12, R13
3100kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1, R5, R8
210kPotentiometer_THT:Potentiometer_Bourns_3266Y_VerticalRV1, RV2
21N4148Diode_THT:D_DO-34_SOD68_P7.62mm_HorizontalD1, D2
21uFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC8, C9
2D512HDBDisplay_7Segment:DA56-11SURKWADISP1, DISP2
1+5VConnector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.1mm+5V
1100nFCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC2
1100pFCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC1
110uFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC6
1150kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR4
11uFCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC3
120kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR7
1220nFCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC5
127kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR9
133kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR3
14001Package_DIP:DIP-14_W7.62mm_LongPadsIC2
1470kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR2
168kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR6
1GNDConnector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.1mmGND
1ICL7107CPLPackage_DIP:DIP-40_W15.24mm_Socket_LongPadsIC1
1LM285Z-1.2Package_TO_SOT_THT:TO-92L_Inline_WideIC3
1TMP36Package_TO_SOT_THT:TO-92L_Inline_WideIC4
1~Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ2
1~Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_VerticalJ5
1~Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_VerticalJ1

The 39 most common of 43 parts.

More from jammycakes/thing-for-measuring-things

2
  • 2 layers71.1 × 72.4 mmCircuits, the printed circuit board in 3D

    Circuits

    jammycakes/thing-for-measuring-things

    A revival of a project I first attempted when I was sixteen

    31 parts
  • 2 layers30.5 × 49.5 mmThermo module, the printed circuit board in 3D

    Thermo module

    jammycakes/thing-for-measuring-things

    A revival of a project I first attempted when I was sixteen

    14 parts

Similar boards

  • 4 layers100 × 75 mmRgb composite, the printed circuit board in 3D

    Rgb composite

    irudoy/openmfd

    That's the case. STM32 LTDC can't output INTERLACED video signal.

    68 partsMIT
  • 2 layers89.8 × 112.8 mmProjekat, the printed circuit board in 3D

    Projekat

    SrdjanEM/True-RMS-voltmeter

    True RMS voltmeter for AC voltage measurments up to 1000 V. Includes ESD protection and overvoltage protection.

    77 parts
  • 2 layers52.2 × 52.2 mmBase, the printed circuit board in 3D

    Base

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    43 parts3kApache-2.0
  • 2 layers33 × 34 mmESP32-bat monitor latch, the printed circuit board in 3D

    ESP32-bat monitor latch

    pcbreflux/espressif

    all espressif stuff will committed here

    43 parts608GPL-3.0
  • 2 layers42.9 × 19 mmPoly kb 2.25U, the printed circuit board in 3D

    Poly kb 2.25U

    thpoll83/PolyKybd

    PolyKybd

    43 parts411CERN-OHL-W-2.0

Questions

How big is the Thermometer mainboard PCB?

It measures 137.2 × 77.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Thermometer mainboard use?

43 parts, built around the ICL7107CPL and LM285Z-1.2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Thermometer mainboard KiCad files?

From the jammycakes/thing-for-measuring-things repository on GitHub, at the commit this page was made from: the board is circuits/thermometer/thermometer-mainboard.kicad_pcb and its schematic circuits/mainboard/mainboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Thermometer mainboard design in my own project?

Its repository states no licence, so its author keeps all rights: ask jammycakes before reusing the design.