Skip to the content
1234567891011121314151617

DRV8833RTYT

Texas InstrumentsExtended

-40℃~+85℃ 1.5A 2 2.7V~10.8V 360mΩ Bipolar Driver Overcurrent Protection、Short-Circuit Protection、Over temperature protection、Under-voltage lockout、Dead-time / shoot-through protection Yes QFN-16-EP(4x4) Stepper Motor Driver ROHS

Part id
ti/DRV8833RTYT
Category
Stepper Motor Driver
Package
QFN-16-EP(4x4)
Pins
17
In stock
0 at JLCPCB (C701802)
Used on
2 open-source boards

Overview

The DRV8833RTYT is a stepper Motor Driver made by Texas Instruments in a QFN-16-EP(4x4) package with 17 pins. -40℃~+85℃ 1.5A 2 2.7V~10.8V 360mΩ Bipolar Driver Overcurrent Protection、Short-Circuit Protection、Over temperature protection、Under-voltage lockout、Dead-time / shoot-through protection Yes QFN-16-EP(4x4) Stepper Motor Driver ROHS.

PCBKit's library has its KiCad symbol (Driver_Motor:DRV8833RTY, from KiCad's library) and its footprint (Package_DFN_QFN:Texas_RTY_WQFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C701802). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

1AISEN2AOUT23BOUT24BISEN5BOUT16FAULT7BIN18BIN29VCP10VM11GND12VINT13AIN214AIN115SLEEP16AOUT1
Driver_Motor:DRV8833RTYFrom KiCad's library

Footprint

1234567891011121314151617
Package_DFN_QFN:Texas_RTY_WQFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mmFrom KiCad's library

Pinout

17
The pins of the DRV8833RTYT
PinNameType
1AISENInput/output
2AOUT2Power out
3BOUT2Power out
4BISENInput/output
5BOUT1Power out
6FAULTOpen collector
7BIN1Input
8BIN2Input
9VCPInput/output
10VMPower in
11GNDPower in
12VINTPower in
13AIN2Input
14AIN1Input
15SLEEPInput
16AOUT1Power out
17GNDPassive

Open-source boards using it

2
  • 4 layers45.2 × 57 mmChestnut V2.0, the printed circuit board in 3D

    Chestnut V2.0

    Roboy/roboy_hand

    Flashing with SWD via raspberry pi with openocd

    126 parts
  • 2 layers85.5 × 54.5 mmSm board, the printed circuit board in 3D

    Sm board

    WPISmartmouse/Smartmouse_pcbs_2018

    52 parts

Parts like it

6

Questions

Is there a KiCad symbol and footprint for the DRV8833RTYT?

Yes. The symbol is Driver_Motor:DRV8833RTY and the footprint Package_DFN_QFN:Texas_RTY_WQFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the DRV8833RTYT?

QFN-16-EP(4x4), with 17 pins. Its footprint is drawn on this page.

Where is the DRV8833RTYT datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the DRV8833RTYT?

JLCPCB lists it as part C701802, with 0 in stock; the sellers' links on this page open their listings.

What can replace the DRV8833RTYT?

Parts like it in the library: the DRV8833RTYR by Texas Instruments, the DRV8801RTYR by Texas Instruments, the DRV8801RTYT by Texas Instruments and the DRV8800RTYR by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the DRV8833RTYT?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.