DRV8801RTYT
Texas InstrumentsExtended
-40℃~+85℃ 10uA 2.8A 830mΩ 8V~36V Current sensing/regulation function、Active braking function Yes QFN-16-EP(4x4) Brushed DC Motor Drivers ROHS
- Part id
- ti/DRV8801RTYT
- Category
- Stepper Motor Driver
- Package
- QFN-16-EP(4x4)
- Pins
- 16
- In stock
- 11 at JLCPCB (C2150687)
Overview
The DRV8801RTYT is a stepper Motor Driver made by Texas Instruments in a QFN-16-EP(4x4) package with 17 pins. -40℃~+85℃ 10uA 2.8A 830mΩ 8V~36V Current sensing/regulation function、Active braking function Yes QFN-16-EP(4x4) Brushed DC Motor Drivers ROHS.
PCBKit's library has its KiCad symbol (Driver_Motor:DRV8801RTY, from KiCad's library) and its footprint (Package_DFN_QFN:Texas_RTY_WQFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm, from KiCad's library), ready for a KiCad board. 11 are in stock at JLCPCB (part C2150687).
Symbol
Footprint
Pinout
17| Pin | Name | Type |
|---|---|---|
| 1 | PHASE | Input |
| 2 | GND | Power in |
| 3 | SLEEP | Input |
| 4 | ENABLE | Input |
| 5 | MODE2 | Input |
| 6 | OUT+ | Power out |
| 7 | SENSE | Power out |
| 8 | VBB | Power in |
| 9 | OUT- | Power out |
| 10 | CP1 | Power in |
| 11 | CP2 | Power in |
| 12 | GND | Passive |
| 13 | VCP | Power in |
| 14 | VPROPI | Output |
| 15 | FAULT | Open collector |
| 16 | MODE1 | Input |
| 17 | GND(PPAD) | Power in |
Parts like it
6
DRV8833RTYR
QFN-16-EP(4x4)-40℃~+85℃ 1.5A 2 2.7V~10.8V 2.7V~10.8V 360mΩ Bipolar Driver Yes QFN-16-EP(4x4) Stepper Motor Driver ROHSTexas InstrumentsStepper Motor DriverDRV8801RTYR
QFN-16-EP(4x4)-40℃~+85℃ 1 10uA 2.8A 8V~36V Yes QFN-16-EP(4x4) Brushed DC Motor Drivers ROHSTexas InstrumentsStepper Motor DriverDRV8833RTYT
QFN-16-EP(4x4)-40℃~+85℃ 1.5A 2 2.7V~10.8V 360mΩ Bipolar Driver Overcurrent Protection、Short-Circuit Protection、Over temperature protection、Under-voltage lockout、Dead-time / shoot-through protection Yes QFN-16-EP(4x4) Stepper Motor Driver ROHSTexas InstrumentsStepper Motor DriverDRV8800RTYR
QFN-16-EP(4x4)-40℃~+85℃ 2.8A Yes QFN-16-EP(4x4) Brushed DC Motor Drivers ROHSTexas InstrumentsStepper Motor DriverDRV8800RTYT
QFN-16-EP(4x4)-40℃~+85℃ 2.8A Interleaved conduction protection、Current sensing/regulation function、Active braking function QFN-16-EP(4x4) Brushed DC Motor Drivers ROHSTexas InstrumentsStepper Motor DriverDRV8833RTYR-JSM
QFN-16(4x4)QFN-16(4x4) Stepper Motor Driver ROHSJSMSEMIStepper Motor Driver
Questions
Is there a KiCad symbol and footprint for the DRV8801RTYT?
Yes. The symbol is Driver_Motor:DRV8801RTY and the footprint Package_DFN_QFN:Texas_RTY_WQFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the DRV8801RTYT?
QFN-16-EP(4x4), with 17 pins. Its footprint is drawn on this page.
Where is the DRV8801RTYT datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the DRV8801RTYT?
JLCPCB lists it as part C2150687, with 11 in stock; the sellers' links on this page open their listings.
What can replace the DRV8801RTYT?
Parts like it in the library: the DRV8833RTYR by Texas Instruments, the DRV8801RTYR by Texas Instruments, the DRV8833RTYT by Texas Instruments and the DRV8800RTYR by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.