Skip to the content
1234567891011121314151617

DRV8800RTYR

Texas InstrumentsExtended

-40℃~+85℃ 2.8A Yes QFN-16-EP(4x4) Brushed DC Motor Drivers ROHS

Part id
ti/DRV8800RTYR
Category
Stepper Motor Driver
Package
QFN-16-EP(4x4)
Pins
17
In stock
0 at JLCPCB (C330401)
Used on
2 open-source boards

Overview

The DRV8800RTYR is a stepper Motor Driver made by Texas Instruments in a QFN-16-EP(4x4) package with 17 pins. -40℃~+85℃ 2.8A Yes QFN-16-EP(4x4) Brushed DC Motor Drivers ROHS.

PCBKit's library has its KiCad symbol (Driver_Motor:DRV8800RTY, from KiCad's library) and its footprint (Package_DFN_QFN:Texas_RTY_WQFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C330401). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

1PHASE2GND3SLEEP4ENABLE6OUT+7SENSE8VBB9OUT-10CP111CP213VCP14VREG15FAULT16MODE17GND(PPAD)
Driver_Motor:DRV8800RTYFrom KiCad's library

Footprint

1234567891011121314151617
Package_DFN_QFN:Texas_RTY_WQFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mmFrom KiCad's library

Pinout

17
The pins of the DRV8800RTYR
PinNameType
1PHASEInput
2GNDPower in
3SLEEPInput
4ENABLEInput
5NCNot connected
6OUT+Power out
7SENSEPower out
8VBBPower in
9OUT-Power out
10CP1Power in
11CP2Power in
12GNDPassive
13VCPPower in
14VREGOutput
15FAULTOpen collector
16MODEInput
17GND(PPAD)Power in

Open-source boards using it

2
  • 2 layers150 × 102 mmTrap pcb, the printed circuit board in 3D

    Trap pcb

    mtsale/trapPCB-nov

    116 partsGPL-3.0
  • 2 layers150 × 102 mmTrap pcb, the printed circuit board in 3D

    Trap pcb

    TheCacophonyProject/trap-pcb

    113 partsGPL-3.0

Parts like it

6

Questions

Is there a KiCad symbol and footprint for the DRV8800RTYR?

Yes. The symbol is Driver_Motor:DRV8800RTY and the footprint Package_DFN_QFN:Texas_RTY_WQFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the DRV8800RTYR?

QFN-16-EP(4x4), with 17 pins. Its footprint is drawn on this page.

Where is the DRV8800RTYR datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the DRV8800RTYR?

JLCPCB lists it as part C330401, with 0 in stock; the sellers' links on this page open their listings.

What can replace the DRV8800RTYR?

Parts like it in the library: the DRV8833RTYR by Texas Instruments, the DRV8801RTYR by Texas Instruments, the DRV8801RTYT by Texas Instruments and the DRV8833RTYT by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the DRV8800RTYR?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.