Skip to the content
12345

BUF634T

Texas InstrumentsExtended

-2.25V~18V -40℃~+85℃ 1 1.5mA 100mV 100uV/℃ 180MHz 250mA 2V/ns 2uA 4nV/√Hz@10kHz TO-220-5 Operational Amplifier ROHS

Part id
ti/BUF634T
Category
Operational Amplifier
Package
TO-220-5
Pins
5
In stock
42 at JLCPCB (C4369480)
Used on
4 open-source boards

Overview

The BUF634T is an operational Amplifier made by Texas Instruments in a TO-220-5 package with 5 pins. -2.25V~18V -40℃~+85℃ 1 1.5mA 100mV 100uV/℃ 180MHz 250mA 2V/ns 2uA 4nV/√Hz@10kHz TO-220-5 Operational Amplifier ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:BUF634T, from EasyEDA) and its footprint (Package_TO_SOT_THT:TO-220-5_Vertical, from KiCad's library), ready for a KiCad board. 42 are in stock at JLCPCB (part C4369480). 4 open-source boards in 3 repositories on GitHub use it.

Symbol

1BW2VIN3V-4VO5V+
EasyEDA_Cloud:BUF634TFrom EasyEDA

Footprint

12345
Package_TO_SOT_THT:TO-220-5_VerticalFrom KiCad's library

Pinout

5
The pins of the BUF634T
PinNameType
1BWUnspecified
2VINUnspecified
3V-Unspecified
4VOUnspecified
5V+Unspecified

Open-source boards using it

4
  • 2 layers160 × 100 mmRedPitaya Lockbox, the printed circuit board in 3D

    RedPitaya Lockbox

    TU-Darmstadt-APQ/RedPitaya-Lockbox

    Digital controller for laser frequency stabilization based on the RedPitaya STEMlab 125-14 board

    110 parts40
  • 2 layers94.4 × 90 mmImpedance Analyzer V3, the printed circuit board in 3D

    Impedance Analyzer V3

    EliMattingly22/Simple_Impedance_Analyzer

    A PCB impedance analyzer to measure loads to 100kHz and beyond

    92 parts12MIT
  • 4 layers145 × 157 mmRear, the printed circuit board in 3D

    Rear

    JQIamo/20A-bipolar-current-source

    20A bipolar current source with water cooled sensing resistor

    99 parts2
  • 2 layers94.4 × 90 mmImpedance Analyzer, the printed circuit board in 3D

    Impedance Analyzer

    EliMattingly22/Simple_Impedance_Analyzer

    A PCB impedance analyzer to measure loads to 100kHz and beyond

    63 parts12MIT

Parts like it

6

Questions

Is there a KiCad symbol and footprint for the BUF634T?

Yes. The symbol is EasyEDA_Cloud:BUF634T and the footprint Package_TO_SOT_THT:TO-220-5_Vertical, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the BUF634T?

TO-220-5, with 5 pins. Its footprint is drawn on this page.

Where is the BUF634T datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the BUF634T?

JLCPCB lists it as part C4369480, with 42 in stock; the sellers' links on this page open their listings.

What can replace the BUF634T?

Parts like it in the library: the OPA544T by Texas Instruments, the BUF634TG3 by Texas Instruments, the OPA544TG3 by Texas Instruments and the LM675T/LF02 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the BUF634T?

4 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.