Skip to the content
12345678

AMC1311DWV

Texas InstrumentsExtended

-40℃~+125℃ 1 15kV/us 220kHz 3.5nA 5000 9.9mV Differential Isolated ΔΣ (Sigma-Delta) modulator SOIC-8 Isolation Amplifiers ROHS

Part id
ti/AMC1311DWV
Category
Isolation Amplifiers
Package
SOIC-8
Pins
8
In stock
0 at JLCPCB (C2859573)
Used on
5 open-source boards

Overview

The AMC1311DWV is an isolation Amplifier made by Texas Instruments in a SOIC-8 package with 8 pins. -40℃~+125℃ 1 15kV/us 220kHz 3.5nA 5000 9.9mV Differential Isolated ΔΣ (Sigma-Delta) modulator SOIC-8 Isolation Amplifiers ROHS.

PCBKit's library has its KiCad symbol (Operational Amplifiers:AMC1311, from CERN's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C2859573). 5 open-source boards in 3 repositories on GitHub use it.

Symbol

2IN1VDD14GND13SHTDN8VDD25GND26OUTN7OUTP
Operational Amplifiers:AMC1311From CERN's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the AMC1311DWV
PinNameType
1VDD1Power in
2INInput
3SHTDNInput
4GND1Power in
5GND2Power in
6OUTNOutput
7OUTPOutput
8VDD2Power in

Open-source boards using it

5
  • 4 layers80 × 60 mm01 main, the printed circuit board in 3D

    01 main

    wgbowley/OpenLSM

    Low-Cost Linear Synchronous Permanent-Magnet Motor

    99 parts11MIT
  • 4 layers71 × 150.5 mmDual Half Bridge Board, the printed circuit board in 3D

    Dual Half Bridge Board

    EdamAbdelhedi/Half_Bridge_Board

    Half Bridge Board - KiCad project

    180 parts
  • 2 layers100 × 100 mmMain supply 3, the printed circuit board in 3D

    Main supply 3

    Thinkpad4by3/chibitron

    Electrostatic CRT driver designed from the ground up for performance, versatility and ease-of-manufacturability

    189 parts6
  • 4 layers70 × 70 mmBoard B, the printed circuit board in 3D

    Board B

    EdamAbdelhedi/Half_Bridge_Board

    Half Bridge Board - KiCad project

    86 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the AMC1311DWV?

Yes. The symbol is Operational Amplifiers:AMC1311 and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the AMC1311DWV?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the AMC1311DWV datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the AMC1311DWV?

JLCPCB lists it as part C2859573, with 0 in stock; the sellers' links on this page open their listings.

What can replace the AMC1311DWV?

Parts like it in the library: the AMC1350DWVR by Texas Instruments, the CA-IS1311G by Chipanalog, the ISO224ADWVR by Texas Instruments and the PAI8300E-W5R by 2Pai Semi. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the AMC1311DWV?

5 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.