Skip to the content
33

ADS131M08IRSNR

Texas InstrumentsExtended

-40℃~+125℃ 101dB 2.7V~3.6V 24 32kHz 350nA 7.5LSB 8 8.192MHz Bipolar input、Integrated modulator、Multi-chip synchronization、Simultaneous sampling、Built-in digital filter Built-in External、Built-in SPI Sigma-Delta Support Yes QFN-32(4x4) Analog to Digital Converters (ADC) ROHS

Part id
ti/ADS131M08IRSNR
Category
Analog To Digital Converters (ADC)
Package
QFN-32(4x4)
Pins
33
In stock
1,827 at JLCPCB (C5124126)
Used on
4 open-source boards

Overview

The ADS131M08IRSNR is an analog To Digital Converter made by Texas Instruments in a QFN-32(4x4) package with 33 pins. -40℃~+125℃ 101dB 2.7V~3.6V 24 32kHz 350nA 7.5LSB 8 8.192MHz Bipolar input、Integrated modulator、Multi-chip synchronization、Simultaneous sampling、Built-in digital filter Built-in External、Built-in SPI Sigma-Delta Support Yes QFN-32(4x4) Analog to Digital Converters (ADC) ROHS.

PCBKit's library has its footprint (EasyEDA_Cloud:WQFN-32_L4.0-W4.0-P0.40-TL-EP2.7, from EasyEDA), ready for a KiCad board. 1,827 are in stock at JLCPCB (part C5124126). 4 open-source boards in 4 repositories on GitHub use it.

Symbol

The library has no symbol for this part yet.

Footprint

33
EasyEDA_Cloud:WQFN-32_L4.0-W4.0-P0.40-TL-EP2.7From EasyEDA

From the datasheet

17
Supply, least
2.7 V · AVDD, recommended operating min, normal operating modes · p. 7
Supply, most
3.6 V · AVDD, recommended operating max, normal operating modes · p. 7
Supply, least
2.4 V · AVDD, recommended operating min, standby and current-detect modes · p. 7
Supply, least
1.65 V · DVDD, recommended operating min, shorted to CAP with digital LDO bypassed · p. 7
Supply, most
2 V · DVDD, recommended operating max, shorted to CAP with digital LDO bypassed · p. 7
Supply, absolute maximum
3.9 V · AVDD to AGND, absolute max · p. 6
Supply, absolute maximum
2.2 V · DVDD to DGND, absolute max with CAP tied to DVDD · p. 6
Works from
-40 °C · Operating ambient temperature min · p. 7
Works up to
125 °C · Operating ambient temperature max · p. 7
Junction, hottest
150 °C · Junction temperature absolute max · p. 6
A pin gives at most
10 mA · Continuous input current absolute max, all pins except power-supply pins · p. 6
Takes working
7.16 mA · sum of AVDD and DVDD typical currents, high-resolution mode, 3 V supplies, SPI idle, oscillator disabled · p. 9
Takes at most
8.6 mA · sum of AVDD and DVDD max currents, high-resolution mode, 3 V supplies, SPI idle, oscillator disabled · p. 9
Takes asleep
1.45 µA · sum of AVDD and DVDD typical standby currents, 3 V supplies · p. 9
Junction to air (RSN (WQFN))
33.7 K/W · Junction-to-ambient thermal resistance · p. 7
Junction to case (RSN (WQFN))
26.5 K/W · Junction-to-case (top) thermal resistance · p. 7
Junction to board (RSN (WQFN))
13.4 K/W · Junction-to-board thermal resistance · p. 7

What it is and has

11
ADC
24-bit delta-sigma, 8 simultaneously sampling channels · p. 1
Analog inputs
8 simultaneously sampling differential inputs · p. 1
Data rate
Programmable, up to 32 kSPS · p. 1
Programmable gain
Up to 128 · p. 1
Dynamic range
102 dB at gain = 1, 4 kSPS · p. 1
Dynamic range
80 dB at gain = 64, 4 kSPS · p. 1
Total harmonic distortion
–100 dB · p. 1
Channel phase calibration
244-ns resolution at 8.192-MHz fCLKIN · p. 1
Crosstalk between channels
–120 dB · p. 1
Voltage reference
Low-drift internal voltage reference · p. 1
Package options
32-pin TQFP or 32-pin WQFN · p. 1

Around it

3
cap 1 µF
between AVDD and AGND; Analog supply capacitor. · p. 5
cap 1 µF
between DVDD and DGND; Digital I/O supply capacitor. · p. 5
cap 220 nF
between CAP and DGND; Digital LDO regulator output capacitor. · p. 5

Specifications

110
ParameterConditionsAs printedPage
Power-supply voltageAVDD to AGNDmin -0.3 · max 3.9 V6
Power-supply voltageAGND to DGNDmin -0.3 · max 0.3 V6
Power-supply voltageDVDD to DGNDmin -0.3 · max 3.9 V6
Power-supply voltageDVDD to DGND, CAP tied to DVDDmin -0.3 · max 2.2 V6
Power-supply voltageCAP to DGNDmin -0.3 · max 2.2 V6
Input currentContinuous, all pins except power-supply pinsmin -10 · max 10 mA6
Temperature TJJunctionmax 150 °C6
Temperature TstgStoragemin -60 · max 150 °C6
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001; rated value ±2000 Vmax 2000 V6
Electrostatic discharge V(ESD)Charged device model (CDM), per JEDEC specification JESD22-C101; rated value ±500 Vmax 500 V6
Analog power supplyAVDD to AGND, normal operating modes; typ field is NOMmin 2.7 · typ 3 · max 3.6 V7
Analog power supplyAVDD to AGND, standby and current-detect modes; typ field is NOMmin 2.4 · typ 3 · max 3.6 V7
Analog power supplyAGND to DGND; typ field is NOMmin -0.3 · typ 0 · max 0.3 V7
Digital power supplyDVDD to DGND; typ field is NOMmin 2.7 · typ 3 · max 3.6 V7
Digital power supplyDVDD to DGND, DVDD shorted to CAP (digital LDO bypassed); typ field is NOMmin 1.65 · typ 1.8 · max 2 V7
Reference input voltage VREFINtyp field is NOMmin 1.1 · typ 1.25 · max 1.3 V7
External clock frequency fCLKINHigh-resolution mode, Gain = 1 or 2; typ field is NOMmin 0.3 · typ 8.192 · max 8.4 MHz7
External clock frequency fCLKINHigh-resolution mode, Gain > 2; typ field is NOMmin 0.3 · typ 8.192 · max 8.2 MHz7
External clock frequency fCLKINLow-power mode; typ field is NOMmin 0.3 · typ 4.096 · max 4.15 MHz7
External clock frequency fCLKINVery-low-power mode; typ field is NOMmin 0.3 · typ 2.048 · max 2.08 MHz7
Duty cycleExternal clock source; typ field is NOMmin 40 · typ 50 · max 60 %7
Operating ambient temperature TAmin -40 · max 125 °C7
Junction-to-ambient thermal resistance RθJARSN (WQFN), 32 pinstyp 33.7 °C/W7
Junction-to-case (top) thermal resistance RθJC(top)RSN (WQFN), 32 pinstyp 26.5 °C/W7
Junction-to-board thermal resistance RθJBRSN (WQFN), 32 pinstyp 13.4 °C/W7
Junction-to-top characterization parameter ΨJTRSN (WQFN), 32 pinstyp 0.3 °C/W7
Junction-to-board characterization parameter ΨJBRSN (WQFN), 32 pinstyp 13.4 °C/W7
Junction-to-case (bottom) thermal resistance RθJC(bot)RSN (WQFN), 32 pinstyp 4.1 °C/W7
Differential input impedance ZinGain = 1, 2, or 4typ 330 kΩ8
Input bias current IbGain = 8, 16, 32, 64, or 128, inputs shorted to ground; typical ±1 uA/Vtyp 1 uA/V8
Resolutionmin 24 Bits8
Startup timeMeasured from supplies at 90% to first DRDY falling edgetyp 0.5 ms8
Integral nonlinearity (best fit) INLtyp 7.5 ppm of FSR8
Offset error (input referred)Global-chop mode disabled; typical ±240 uVtyp 240 uV8
Offset error (input referred)Global-chop mode; typical ±32 uVtyp 32 uV8
Offset driftGlobal-chop mode disabledtyp 215 nV/°C8
Offset driftGlobal-chop modetyp 105 nV/°C8
Gain errorTypical ±0.3%typ 0.3 %8
Gain driftExcluding voltage reference error, gain = 1typ 5 ppm/°C8
Gain driftIncluding internal voltage reference error, gain = 1typ 10 · max 20 ppm/°C8
Gain driftIncluding internal voltage reference error, gain = 32typ 15 ppm/°C8
Long-term gain drift1000 hours at 85°C, including internal voltage reference error, WQFN packagetyp 90 ppm8
Common-mode rejection ratio CMRRAt dctyp 100 dB8
Common-mode rejection ratio CMRRfCM = 50 Hz or 60 Hztyp 94 dB8
Power-supply rejection ratio PSRRAVDD at DCtyp 80 dB8
Power-supply rejection ratio PSRRDVDD at DCtyp 100 dB8
Power-supply rejection ratio PSRRAVDD supply, fPS = 50 Hz or 60 Hztyp 78 dB8
Power-supply rejection ratio PSRRDVDD supply, fPS = 50 Hz or 60 Hztyp 90 dB8
Input referred noisetyp 5.4 uVRMS8
Input referred noiseDuring fast startuptyp 1500 uVRMS8
Dynamic rangeGain = 1min 99 · typ 102 dB8
Dynamic rangeGain = 64typ 80 dB8
CrosstalkfIN = 50 Hz or 60 Hztyp -120 dB8
Signal-to-noise ratio SNRfIN = 50 Hz or 60 Hz, gain = 1, VIN = –0.5 dBFS, normalizedtyp 101 dB9
Signal-to-noise ratio SNRfIN = 50 Hz or 60 Hz, gain = 64, VIN = –0.5 dBFS, normalizedtyp 80 dB9
Total harmonic distortion THDfIN = 50 Hz or 60 Hz (up to 50 harmonics), VIN = –0.5 dBFStyp -100 dB9
Spurious-free dynamic range SFDRfIN = 50 Hz or 60 Hz (up to 50 harmonics), VIN = –0.5 dBFStyp 103 dB9
Internal reference voltage VREFtyp 1.2 V9
AccuracyInternal voltage reference, TA = 25°C; typical ±0.1%typ 0.1 %9
Temperature driftInternal voltage referencetyp 8 · max 20 ppm/°C9
Long-term reference drift1000 hours at 85°C, WQFN packagetyp 70 ppm9
Input current IINDGND < VDigital Input < DVDDmin -1 · max 1 uA9
Analog supply current IAVDDHigh-resolution modetyp 6.5 · max 7.7 mA9
Analog supply current IAVDDLow-power modetyp 3.4 · max 4.1 mA9
Analog supply current IAVDDVery low-power modetyp 1.9 · max 2.3 mA9
Analog supply current IAVDDCurrent-detect modetyp 1.8 mA9
Analog supply current IAVDDStandby modetyp 0.35 uA9
Digital supply current IDVDDHigh-resolution mode; SPI idle and oscillator disabledtyp 0.66 · max 0.9 mA9
Digital supply current IDVDDLow-power mode; SPI idle and oscillator disabledtyp 0.35 · max 0.47 mA9
Digital supply current IDVDDVery low-power mode; SPI idle and oscillator disabledtyp 0.18 · max 0.3 mA9
Digital supply current IDVDDCurrent-detect mode; SPI idle and oscillator disabledtyp 0.115 mA9
Digital supply current IDVDDStandby mode; SPI idle and oscillator disabledtyp 1.1 uA9
Power dissipation PDHigh-resolution modetyp 21.5 mW9
Power dissipation PDLow-power modetyp 11.3 mW9
Power dissipation PDVery low-power modetyp 6.2 mW9
Power dissipation PDCurrent-detect modetyp 5.8 mW9
Power dissipation PDStandby modetyp 4.4 uW9
Pulse duration, CLKIN low tw(CLL)1.65 V ≤ DVDD ≤ 2.0 Vmin 49 ns10
Pulse duration, CLKIN high tw(CLH)1.65 V ≤ DVDD ≤ 2.0 Vmin 49 ns10
SCLK period tc(SC)1.65 V ≤ DVDD ≤ 2.0 Vmin 64 ns10
Pulse duration, SCLK low tw(SCL)1.65 V ≤ DVDD ≤ 2.0 Vmin 32 ns10
Pulse duration, SCLK high tw(SCH)1.65 V ≤ DVDD ≤ 2.0 Vmin 32 ns10
Delay time, first SCLK rising edge after CS falling edge td(CSSC)1.65 V ≤ DVDD ≤ 2.0 Vmin 16 ns10
Delay time, CS rising edge after final SCLK falling edge td(SCCS)1.65 V ≤ DVDD ≤ 2.0 Vmin 10 ns10
Pulse duration, CS high tw(CSH)1.65 V ≤ DVDD ≤ 2.0 Vmin 20 ns10
Setup time, DIN valid before SCLK falling egde tsu(DI)1.65 V ≤ DVDD ≤ 2.0 Vmin 5 ns10
Hold time, DIN valid after SCLK falling edge th(DI)1.65 V ≤ DVDD ≤ 2.0 Vmin 10 ns10
Pulse duration, SYNC/RESET low to generate device reset tw(RSL)1.65 V ≤ DVDD ≤ 2.0 Vmin 2048 tCLKIN10
Pulse duration, SYNC/RESET low for synchronization tw(SYL)1.65 V ≤ DVDD ≤ 2.0 Vmin 1 · max 2047 tCLKIN10
Setup time, SYNC/RESET valid before CLKIN rising edge tsu(SY)1.65 V ≤ DVDD ≤ 2.0 Vmin 10 ns10
Pulse duration, CLKIN low tw(CLL)2.7 V ≤ DVDD ≤ 3.6 Vmin 49 ns10
Pulse duration, CLKIN high tw(CLH)2.7 V ≤ DVDD ≤ 3.6 Vmin 49 ns10
SCLK period tc(SC)2.7 V ≤ DVDD ≤ 3.6 Vmin 40 ns10
Pulse duration, SCLK low tw(SCL)2.7 V ≤ DVDD ≤ 3.6 Vmin 20 ns10
Pulse duration, SCLK high tw(SCH)2.7 V ≤ DVDD ≤ 3.6 Vmin 20 ns10
Delay time, first SCLK rising edge after CS falling edge td(CSSC)2.7 V ≤ DVDD ≤ 3.6 Vmin 16 ns10
Delay time, CS rising edge after final SCLK falling edge td(SCCS)2.7 V ≤ DVDD ≤ 3.6 Vmin 10 ns10
Pulse duration, CS high tw(CSH)2.7 V ≤ DVDD ≤ 3.6 Vmin 15 ns10
Setup time, DIN valid before SCLK falling egde tsu(DI)2.7 V ≤ DVDD ≤ 3.6 Vmin 5 ns10
Hold time, DIN valid after SCLK falling edge th(DI)2.7 V ≤ DVDD ≤ 3.6 Vmin 10 ns10
Pulse duration, SYNC/RESET low to generate device reset tw(RSL)2.7 V ≤ DVDD ≤ 3.6 Vmin 2048 tCLKIN10
Pulse duration, SYNC/RESET low for synchronization tw(SYL)2.7 V ≤ DVDD ≤ 3.6 Vmin 1 · max 2047 tCLKIN10
Setup time, SYNC/RESET valid before CLKIN rising edge tsu(SY)2.7 V ≤ DVDD ≤ 3.6 Vmin 10 ns10
Propagation delay time, CS falling edge to DOUT driven tp(CSDO)1.65 V ≤ DVDD ≤ 2.0 V; DOUT load: 20 pF || 100 kΩmax 50 ns10
Progapation delay time, SCLK rising edge to valid new DOUT tp(SCDO)1.65 V ≤ DVDD ≤ 2.0 V; DOUT load: 20 pF || 100 kΩmax 32 ns10
Propagation delay time, CS rising edge to DOUT high impedace tp(CSDOZ)1.65 V ≤ DVDD ≤ 2.0 V; DOUT load: 20 pF || 100 kΩmax 75 ns10
Pulse duration, DRDY high tw(DRH)1.65 V ≤ DVDD ≤ 2.0 V; DOUT load: 20 pF || 100 kΩtyp 4 tCLKIN10
Pulse duration, DRDY low tw(DRL)1.65 V ≤ DVDD ≤ 2.0 V; DOUT load: 20 pF || 100 kΩtyp 4 tCLKIN10
SPI timeout1.65 V ≤ DVDD ≤ 2.0 Vmin 32768 tCLKIN10
Power-on-reset time tPOR1.65 V ≤ DVDD ≤ 2.0 V; measured from supplies at 90% to first DRDY rising edgetyp 250 us10

Pins, by the datasheet

33
1 AIN2P
Positive analog input 2. · p. 5
2 AIN2N
Negative analog input 2. · p. 5
3 AIN3N
Negative analog input 3. · p. 5
4 AIN3P
Positive analog input 3. · p. 5
5 AIN4P
Positive analog input 4. · p. 5
6 AIN4N
Negative analog input 4. · p. 5
7 AIN5N
Negative analog input 5. · p. 5
8 AIN5P
Positive analog input 5. · p. 5
9 AIN6P
Positive analog input 6. · p. 5
10 AIN6N
Negative analog input 6. · p. 5
11 AIN7N
Negative analog input 7. · p. 5
12 AIN7P
Positive analog input 7. · p. 5
13 AGND
Analog ground. · p. 5
14 REFIN
External reference voltage input; do not place capacitance on REFIN if current-detect mode is used. · p. 5
15 AVDD
Analog supply; connect a 1-uF capacitor to AGND. · p. 5
16 SYNC/RESET
Conversion synchronization or system reset; active low. · p. 5
17 CS
Chip select; active low. · p. 5
18 DRDY
Data ready; active low. · p. 5
19 SCLK
Serial data clock. · p. 5
20 DOUT
Serial data output. · p. 5
21 DIN
Serial data input. · p. 5
22 XTAL2
Crystal oscillator excitation. · p. 5
23 XTAL1/CLKIN
Master clock input, or crystal oscillator input. · p. 5
24 CAP
Digital low-dropout regulator output; connect a 220-nF capacitor to DGND. · p. 5
25 DGND
Digital ground. · p. 5
26 DVDD
Digital I/O supply; connect a 1-uF capacitor to DGND. · p. 5
27 NC
Leave unconnected or connect to AGND. · p. 5
28 AGND
Analog ground. · p. 5
29 AIN0P
Positive analog input 0. · p. 5
30 AIN0N
Negative analog input 0. · p. 5
31 AIN1N
Negative analog input 1. · p. 5
32 AIN1P
Positive analog input 1. · p. 5
Thermal pad Thermal pad
Thermal pad; connect to AGND. · p. 5

Open-source boards using it

4
  • 4 layers70 × 70 mmFreeEEG32-alpha131, the printed circuit board in 3D

    FreeEEG32-alpha131

    neuroidss/FreeEEG32-alpha131

    https://hackaday.io/project/181683-freeeeg32-alpha131

    124 parts4AGPL-3.0
  • 4 layers70 × 70 mmFreeEEG128-alpha, the printed circuit board in 3D

    FreeEEG128-alpha

    m9h/freeeeg128

    Open-hardware 128-channel EEG acquisition system — design audit, firmware rewrite roadmap, Pi Zero 2W host stack, and synthesis paper

    168 parts3
  • 8 layers200 × 115 mmEnergyMonitoringSystem, the printed circuit board in 3D

    EnergyMonitoringSystem

    vigneshuw/aems

    Autonomous Energy Monitoring System (AEMS)

    297 parts1
  • 4 layers85 × 76 mmPressuretransducers, the printed circuit board in 3D

    Pressuretransducers

    npgo22/APRL-Electrical

    PCBs for APRL electrical

    183 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ADS131M08IRSNR?

Yes. the footprint EasyEDA_Cloud:WQFN-32_L4.0-W4.0-P0.40-TL-EP2.7, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ADS131M08IRSNR?

QFN-32(4x4), with 33 pins. Its footprint is drawn on this page.

Where is the ADS131M08IRSNR datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the ADS131M08IRSNR?

JLCPCB lists it as part C5124126, with 1,827 in stock; the sellers' links on this page open their listings.

What can replace the ADS131M08IRSNR?

Parts like it in the library: the ADS131M08IPBSR by Texas Instruments, the ADS131M02IPW by Texas Instruments, the ADS131M02IRUK by Texas Instruments and the ADS131M04IRUK by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ADS131M08IRSNR?

4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.