4 layers65 × 50 mm
Luminometer ADC
czbiohub-sf/portable-luminometer
Software and electronics for the portable SiPM luminometer.
75 parts1BSD-3-Clause
ADS131M08IPBS
Texas InstrumentsExtended
-40℃~+125℃ 1.2V 101dB 2.7V~3.6V 24 32kHz 32kHz 7.5LSB 7.7mA 8 8.192MHz 8ppm/℃ Built-in External、Built-in SPI Sigma-Delta Support Yes TQFP-32(5x5) Analog to Digital Converters (ADC) ROHS
- Part id
- ti/ADS131M08IPBS
- Category
- Analog To Digital Converters (ADC)
- Package
- TQFP-32(5x5)
- Pins
- 32
- In stock
- 513 at JLCPCB (C2685451)
- Used on
- 4 open-source boards
Overview
The ADS131M08IPBS is an analog To Digital Converter made by Texas Instruments in a TQFP-32(5x5) package with 32 pins. -40℃~+125℃ 1.2V 101dB 2.7V~3.6V 24 32kHz 32kHz 7.5LSB 7.7mA 8 8.192MHz 8ppm/℃ Built-in External、Built-in SPI Sigma-Delta Support Yes TQFP-32(5x5) Analog to Digital Converters (ADC) ROHS.
PCBKit's library has its KiCad symbol (Analog_ADC:ADS131M08xPBS, from KiCad's library) and its footprint (Package_QFP:TQFP-32_5x5mm_P0.5mm, from KiCad's library), ready for a KiCad board. 513 are in stock at JLCPCB (part C2685451). 4 open-source boards in 4 repositories on GitHub use it.
Symbol
Footprint
Pinout
32| Pin | Name | Type |
|---|---|---|
| 1 | AIN2P | Input |
| 2 | AIN2N | Input |
| 3 | AIN3N | Input |
| 4 | AIN3P | Input |
| 5 | AIN4P | Input |
| 6 | AIN4N | Input |
| 7 | AIN5N | Input |
| 8 | AIN5P | Input |
| 9 | AIN6P | Input |
| 10 | AIN6N | Input |
| 11 | AIN7N | Input |
| 12 | AIN7P | Input |
| 13 | AGND | Power in |
| 14 | REFIN | Input |
| 15 | AVDD | Power in |
| 16 | SYNC/RESET | Input |
| 17 | CS | Input |
| 18 | DRDY | Output |
| 19 | SCLK | Input |
| 20 | DOUT | Tri-state |
| 21 | DIN | Input |
| 22 | XTAL2 | Output |
| 23 | XTAL1/CLKIN | Input |
| 24 | CAP | Passive |
| 25 | DGND | Power in |
| 26 | DVDD | Power in |
| 27 | AGND | Passive |
| 28 | AGND | Passive |
| 29 | AIN0P | Input |
| 30 | AIN0N | Input |
| 31 | AIN1N | Input |
| 32 | AIN1P | Input |
Open-source boards using it
4- 4 layers91.4 × 43.2 mm
Emg v2
dgaddy/biosensing_circuit_board
Custom printed circuit board for biosensing, such as EMG, EEG, or ECG
52 parts1MIT - 4 layers68.6 × 53.3 mm
- 4 layers90 × 60 mm
Device
jayis1/hardware-design-lab
Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack
19 parts
Parts like it
8
ADS131M08IPBSR
TQFP-32(5x5)-40℃~+125℃ 101dB 2.7V~3.6V 24 32kHz 350nA 7.5LSB 8 8.192MHz Auto calibration、Input buffer、Power-on reset、Bipolar input、Integrated modulator、Multi-chip synchronization、Synchronous triggering、Built-in digital filter Built-in External SPI Sigma-Delta Support Yes TQFP-32(5x5) Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)ADS131M06IPBS
TQFP-32(5x5)-40℃~+125℃ 2.7V~3.6V 24 32kHz 6 SPI TQFP-32(5x5) Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)ADS131M06QPBSRQ1
TQFP-32(5x5)-40℃~+125℃ 2.4V~3.6V、2.7V~3.6V 24 32kHz 6 Multiplexers、Input buffer、Integrated modulator、Simultaneous sampling、Built-in digital filter SPI TQFP-32(5x5) Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)
ADS131M02IPW
TSSOP-20-40℃~+125℃ 1.2V 102dB 2 2.7V、3.6V 24 300nA 64kHz 64kHz 7.5ppm/℃ 8.192MHz 9LSB Built-in External SPI Sigma-Delta Support Yes TSSOP-20 Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)
ADS131M02IRUK
WQFN-20(3x3)-40℃~+125℃ 102dB 2 2.7V~3.6V 24 64kHz 8.192MHz 9LSB Auto calibration、Input buffer、Bipolar input、Integrated modulator、Multi-chip synchronization、Simultaneous sampling、Built-in digital filter Built-in External SPI Sigma-Delta Support Yes WQFN-20(3x3) Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)ADS131M04IRUK
WQFN-20(3x3)-40℃~+125℃ 102dB 2.7V~3.6V 24 4 64kHz 64kHz 65uA 7.5ppm/℃ 8.192MHz Built-in External SPI Sigma-Delta Support Yes WQFN-20(3x3) Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)ADS131M04IPW
TSSOP-20-40℃~+125℃ 2.7V~3.6V 24 4 4mA 64kHz 79dB 8.192MHz Built-in External Input buffer、Power-on reset、Integrated modulator、Synchronous triggering、Simultaneous sampling、Built-in digital filter SPI Sigma-Delta Support Yes TSSOP-20 Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)ADS131M03IPW
TSSOP-20-40℃~+125℃ 100dB 2.4V~3.6V 20ppm/℃ 24 3 3.2mA 300kHz~8.4MHz、8.192MHz 32kHz 64kHz Built-in External SPI、Serial port Sigma-Delta Support Yes TSSOP-20 Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)
Questions
Is there a KiCad symbol and footprint for the ADS131M08IPBS?
Yes. The symbol is Analog_ADC:ADS131M08xPBS and the footprint Package_QFP:TQFP-32_5x5mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the ADS131M08IPBS?
TQFP-32(5x5), with 32 pins. Its footprint is drawn on this page.
Where is the ADS131M08IPBS datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the ADS131M08IPBS?
JLCPCB lists it as part C2685451, with 513 in stock; the sellers' links on this page open their listings.
What can replace the ADS131M08IPBS?
Parts like it in the library: the ADS131M08IPBSR by Texas Instruments, the ADS131M06IPBS by Texas Instruments, the ADS131M06QPBSRQ1 by Texas Instruments and the ADS131M02IPW by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the ADS131M08IPBS?
4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.