
VNH3SP30-E
STMicroelectronicsExtended
-40℃~+150℃ 1 30A 45A 45mΩ 5.5V~36V Yes MultiPowerSO-30 Brushed DC Motor Drivers ROHS
- Part id
- st/VNH3SP30-E
- Category
- Brushed DC Motor Drivers
- Package
- MultiPowerSO-30
- Pins
- 33
- In stock
- 0 at JLCPCB (C1556955)
- Used on
- 3 open-source boards
Overview
The VNH3SP30-E is a brushed DC Motor Driver made by STMicroelectronics in a MultiPowerSO-30 package with 33 pins. -40℃~+150℃ 1 30A 45A 45mΩ 5.5V~36V Yes MultiPowerSO-30 Brushed DC Motor Drivers ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:VNH3SP30TR-E_C2969756, from EasyEDA) and its footprint (EasyEDA_Cloud:MULTIPOWERSO-30_L17.2-W16.0-P1.00-LS19.0-BL, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C1556955). 3 open-source boards in 3 repositories on GitHub use it.
Symbol
Footprint
Pinout
33| Pin | Name | Type |
|---|---|---|
| 1 | OUTA | Unspecified |
| 2 | NC | Unspecified |
| 3 | VCC | Unspecified |
| 4 | NC | Unspecified |
| 5 | INA | Unspecified |
| 6 | ENA/DIAGA | Unspecified |
| 7 | NC | Unspecified |
| 8 | PWM | Unspecified |
| 9 | NC | Unspecified |
| 10 | ENB/DIAGB | Unspecified |
| 11 | INB | Unspecified |
| 12 | NC | Unspecified |
| 13 | VCC | Unspecified |
| 14 | NC | Unspecified |
| 15 | OUTB | Unspecified |
| 16 | OUTB | Unspecified |
| 17 | NC | Unspecified |
| 18 | GNDB | Unspecified |
| 19 | GNDB | Unspecified |
| 20 | GNDB | Unspecified |
| 21 | OUTB | Unspecified |
| 22 | NC | Unspecified |
| 23 | VCC | Unspecified |
| 24 | NC | Unspecified |
| 25 | OUTA | Unspecified |
| 26 | GNDA | Unspecified |
| 27 | GNDA | Unspecified |
| 28 | GNDA | Unspecified |
| 29 | NC | Unspecified |
| 30 | OUTA | Unspecified |
| 31 | VCC | Unspecified |
| 32 | OUTB | Unspecified |
| 33 | OUTA | Unspecified |
Open-source boards using it
3- 4 layers192 × 137.2 mm

- 2 layers240 × 125 mm

Controller
Technariumas/smalsiukas
The conversion of a forklift truck to a line following robot.
277 partsApache-2.0 - 2 layers46.2 × 25.3 mm

SMD
AgustinPrietoValdez/competition-robots
Custom competition robots — maze/micromouse (MISA), sumo (TATAMI 1) & mini-sumo (RUCHO). KiCad PCBs, STM32/Arduino firmware, Fusion 360. National champion & international prizes — by EDNAROBOTICS.
5 partsMIT
Parts like it
2Questions
Is there a KiCad symbol and footprint for the VNH3SP30-E?
Yes. The symbol is EasyEDA_Cloud:VNH3SP30TR-E_C2969756 and the footprint EasyEDA_Cloud:MULTIPOWERSO-30_L17.2-W16.0-P1.00-LS19.0-BL, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the VNH3SP30-E?
MultiPowerSO-30, with 33 pins. Its footprint is drawn on this page.
Where is the VNH3SP30-E datasheet?
STMicroelectronics publishes it: the Datasheet link on this page opens it.
Where can I order the VNH3SP30-E?
JLCPCB lists it as part C1556955, with 0 in stock; the sellers' links on this page open their listings.
What can replace the VNH3SP30-E?
Parts like it in the library: the VNH5019ATR-E by STMicroelectronics and the VNH3SP30TR-E by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the VNH3SP30-E?
3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.