Skip to the content
PCBKitNew board
TS912ID on a board, in 3D

TS912ID

STMicroelectronics

-40℃~+125℃ 100pA 10mV 150pA 16V 2 2.7V~16V 200uA 30nV/√Hz@1kHz 400V/ms 40mA 5uV/℃ 70dB 800kHz Rail-to-Rail Input, Rail-to-Rail Output SO-8 Operational Amplifier ROHS

Extended
DatasheetJLCPCBLCSCst/TS912ID
Category
Operational Amplifier
Package
SO-8
Pins
8

Overview

The TS912ID is an operational Amplifier made by STMicroelectronics in a SO-8 package with 8 pins. -40℃~+125℃ 100pA 10mV 150pA 16V 2 2.7V~16V 200uA 30nV/√Hz@1kHz 400V/ms 40mA 5uV/℃ 70dB 800kHz Rail-to-Rail Input, Rail-to-Rail Output SO-8 Operational Amplifier ROHS.

PCBKit's library has its KiCad symbol (Amplifier_Operational:TS912, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 55 are in stock at JLCPCB (part C1347561). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

1-2+3
Amplifier_Operational:TS912From KiCad's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Parameters

15
Common Mode Rejection Ratio(CMRR)
70dB
Gain Bandwidth Product
800kHz
Ib - Input Bias Current
150pA
Input Offset Current(Ios)
100pA
Input Offset Voltage Drift(Vos TC)
5uV/℃
Input Voltage Noise Density
30nV/√Hz@1kHz
Maximum Power Supply Range (Vdd-Vss)
16V
Number of Channels
2
Operating Temperature
-40℃~+125℃
Output Current
40mA
Quiescent Current
200uA
Rail to Rail
Rail-to-Rail Input, Rail-to-Rail Output
Single supply
2.7V~16V
Slew Rate
400V/ms
Vos - Input Offset Voltage
10mV

Order codes

1

Pinout

8
The pins of the TS912ID
PinNameType
1—Output
2-Input
3+Input
4V-Power in
5+Input
6-Input
7—Output
8V+Power in

Open-source boards using it

All 2
  • 4 layers75 × 75 mmUSAN r0, the printed circuit board in 3D

    USAN r0

    alu-source/open_USAN

    This project documents the software and hardware of an ultrasonic anemometer, created in cooperation between FH Aachen and DLR Göttingen

    262 parts1
  • 2 layers102.8 × 46.5 mmMETAL AIR BMS, the printed circuit board in 3D

    METAL AIR BMS

    MAATHES-THILAK-K/METAL_AIR_BMS

    STM32-based Single Cell Metal-Air Battery Management System (BMS) featuring real-time voltage/current monitoring, temperature sensing, hydrogen gas detection, protection mechanisms, UART communication, and a…

    88 parts

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/st/TS912ID" title="TS912ID in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/st/TS912ID.jpg" alt="TS912ID" width="1200" height="900">
A picture that opens the part, for a README
[![TS912ID](https://pcbkit.io/embed/parts/st/TS912ID.jpg?size=s)](https://pcbkit.io/parts/st/TS912ID)

Questions

Is there a KiCad symbol and footprint for the TS912ID?

Yes. The symbol is Amplifier_Operational:TS912 and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TS912ID?

SO-8, with 8 pins. Its footprint is drawn on this page.

Where is the TS912ID datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the TS912ID?

JLCPCB lists it as part C1347561, with 55 in stock; the sellers' links on this page open their listings.

What can replace the TS912ID?

Parts like it in the library: the LM358D by onsemi, the LM2904D by onsemi, the LM358DT by STMicroelectronics and the TLV9062ID by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TS912ID?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8