Skip to the content
123456789101112131415161718

TESEO-LIV3R

STMicroelectronicsExtended

SMD-18P GNSS Modules ROHS

Part id
st/TESEO-LIV3R
Category
GNSS Modules
Package
SMD-18P
Pins
18
In stock
0 at JLCPCB (C2970256)
Used on
11 open-source boards

Overview

The TESEO-LIV3R is a GNSS Module made by STMicroelectronics in a SMD-18P package with 18 pins. SMD-18P GNSS Modules ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TESEO-LIV3R_C2970256, from EasyEDA) and its footprint (EasyEDA_Cloud:GPS-SMD_18P-L10.1-W9.7-P1.10-BR, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C2970256). 11 open-source boards in 9 repositories on GitHub use it.

Symbol

11RF_IN3RX15Reserved18Reserved17SCL16SDA9SYS_RSTn41PPS13Ant_OFF2TX6Vbatt5Wake-Up12GND_RF10GND_RF1GND14VCC_RF7VCC_IO8VCC
EasyEDA_Cloud:TESEO-LIV3R_C2970256From EasyEDA

Footprint

123456789101112131415161718
EasyEDA_Cloud:GPS-SMD_18P-L10.1-W9.7-P1.10-BRFrom EasyEDA

Pinout

18
The pins of the TESEO-LIV3R
PinNameType
1GNDUnspecified
2TXUnspecified
3RXUnspecified
41PPSUnspecified
5Wake-UpUnspecified
6VbattUnspecified
7VCC_IOUnspecified
8VCCUnspecified
9SYS_RSTnUnspecified
10GND_RFUnspecified
11RF_INUnspecified
12GND_RFUnspecified
13Ant_OFFUnspecified
14VCC_RFUnspecified
15ReservedUnspecified
16SDAUnspecified
17SCLUnspecified
18ReservedUnspecified

Open-source boards using it

11See all 11
  • 4 layers60 × 100 mmMIDAS MK1, the printed circuit board in 3D

    MIDAS MK1

    ISSUIUC/ISS-PCB

    Building custom flight computers

    221 parts33
  • 4 layers99 × 64 mmWSPR ease, the printed circuit board in 3D

    WSPR ease

    alanmimms/WSPR-ease

    Easy WSPR transmitter using ESP32C3 and not much else.

    182 parts1MIT
  • 4 layers74.9 × 81.3 mmWatersphere MOBO, the printed circuit board in 3D

    Watersphere MOBO

    blanchardp2ATWIT/Watersphere_MOBO

    Senior Capstone project motherboard.

    112 parts
  • 4 layers80 × 50 mmPCB LoRa+GPS, the printed circuit board in 3D

    PCB LoRa+GPS

    ChrisKlein01/ArrozPCB

    LoRa-based GPS PCB design with KiCad

    84 parts
  • 2 layers74.5 × 40 mmMain Bike Print, the printed circuit board in 3D

    Main Bike Print

    IoT-Systems-Lab/Smart-Bike

    This repository contains the work for our Smart Bike project, part of the university IoT lab. The goal is to design a lightweight, low-power system that collects and transmits sensor data from a bicycle in real time —…

    128 parts
  • 4 layers32.5 × 29.3 mmRelativeGPS, the printed circuit board in 3D

    RelativeGPS

    m-guihard/relativeGPS

    110 parts
  • 4 layers45 × 16.5 mmHadesGPSDongle, the printed circuit board in 3D

    HadesGPSDongle

    pms67/HadesFCS

    Complete flight control system designed from scratch. Hardware designed with KiCad.

    27 parts1kBSD-3-Clause
  • 4 layers60 × 100 mmMIDAS MK1.1, the printed circuit board in 3D

    MIDAS MK1.1

    ISSUIUC/ISS-PCB

    Building custom flight computers

    221 parts33

Parts like it

4

Questions

Is there a KiCad symbol and footprint for the TESEO-LIV3R?

Yes. The symbol is EasyEDA_Cloud:TESEO-LIV3R_C2970256 and the footprint EasyEDA_Cloud:GPS-SMD_18P-L10.1-W9.7-P1.10-BR, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TESEO-LIV3R?

SMD-18P, with 18 pins. Its footprint is drawn on this page.

Where is the TESEO-LIV3R datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the TESEO-LIV3R?

JLCPCB lists it as part C2970256, with 0 in stock; the sellers' links on this page open their listings.

What can replace the TESEO-LIV3R?

Parts like it in the library: the ATGM336H-5NR32 by ZHONGKEWEI, the TESEO-LIV4F by STMicroelectronics, the ATGM336H-5NR32-G by ZHONGKEWEI and the M210Z by Ru Bo Microelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TESEO-LIV3R?

11 boards in 9 repositories on GitHub; the most starred are listed on this page, with their KiCad files.