Skip to the content
4 layers32.5 × 29.3 mmRelativeGPS, the printed circuit board in 3D
Size
32.5 × 29.3 mm
Copper layers
4
Thickness
1.6 mm
Parts
110
Nets
109
Pads
387
Tracks, vias
1,313, 189
Pours
4
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
18 Mar 2024
Updated
15 Jun 2025

Overview

RelativeGPS is an open-source printed circuit board by m-guihard, from the m-guihard/relativeGPS repository on GitHub. It is a 4-layer board of 32.5 × 29.3 mm with 110 parts on 109 nets, routed with 1,313 tracks and 189 vias.

It is built around the BGA725L6E6327FTSA1, TESEO-LIV3R and ST1S12GR, with the 74LVC1T45GW,125-JSM, B39162B4327P810 and LSM303AH among its other parts. Its parts include 36 capacitors, 15 resistors, 13 ICs, 11 diodes and 6 inductors. It belongs with the STM32 boards of this library.

Main components

12

README

README.md

relativeGPS

Parts

110
QtyValueFootprintReferences
19TP_square_1mm011-Misc:Testpoint_square_1mmTP1, TP2, TP3, TP4, TP5, TP6, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19 +3
12C_100nF_50V_10%_X7R_0402_H0.55002-Capacitors:C_0402_H0.55C7, C9, C12, C17, C21, C27, C29, C31, C32, C33, C34, C35
11COM-16347006-Diodes:COM-16347D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11
4R_100k_1%_1/16W_0402001-Resistors:R_0402_H0.4R11, R12, R13, R14
3C_1uF_50V_10%_X5R_0402_H0.55002-Capacitors:C_0402_H0.55C8, C10, C11
3C_2.2uF_25V_25%_X5R_0402_H0.55002-Capacitors:C_0402_H0.55C13, C26, C30
3C_22uF_25V_20%_X5S_0603_H1002-Capacitors:C_0603_H0.95C19, C20, C25
2C_10nF_50V_10%_X7R_0402_H0.55002-Capacitors:C_0402_H0.55C5, C28
2C_10uF_10V_20%_X5R_0603H0.9002-Capacitors:C_0603_H0.95C22, C23
2C_120pF_50V_5%_C0G_0402_H0.55002-Capacitors:C_0402_H0.55C1, C4
2C_4.7uF_10V_10%_X7S_0603_H0.95002-Capacitors:C_0603_H0.95C2, C15
2EVQ-P7A01P009-Connectors:EVQ-P7A01PSW2, SW3
2FERR_120R@100MHz_5%_1.5A_95mOhm003-Inductors:FERR_0402_H0.55L5, L6
2R_4k7_5%_1/16W_0402001-Resistors:R_0402_H0.4R5, R7
2R_DNP_0402001-Resistors:R_0402_H0.4R9, R10
15033981892009-Connectors:Micro_SD_5033981892CN4
174LVC1T45GW.125005-ICs:TSSOP6_SOT363-2U7
1AAA_2X_Holder004-Power:AAA_2X_HolderB7
1ANT2525B00DT1516S010-RF:ANT2525B00DT1516SANT1
1ASE-8.000MHZ-L-C-T005-ICs:ASE-8.000MHZ-L-C-TU12
1B39162B4327P810010-RF:B39162B4327P810U5
1BGA725L6E6327FTSA1010-RF:BGA725L6E6327FTSA1U3
1C_100pF_50V_5%_C0G_0603_H0.9002-Capacitors:C_0603_H0.95C18
1C_10uF_10V_20%_X5R_0402_H0.55002-Capacitors:C_0402_H0.55C36
1C_1uF_50V_10%_X5R_0603_H0.9002-Capacitors:C_0603_H0.95C16
1C_220nF_16V_10%_X7R_0402_H0.55002-Capacitors:C_0402_H0.55C14
1C_22uF_6.3V_20%_X5R_0805_H1.4002-Capacitors:C_0805_H1.4C3
1C_47pF_50V_5%_C0G_0402002-Capacitors:C_0402_H0.55C24
1C_56pF_50V_2%_C0G_0201_H0.33002-Capacitors:C_0402_H0.55C6
1FTSH-107-01-L-DV-K-P-TR009-Connectors:FTSH-107-01-L-DV-K-P-TRCN1
1LSM303AH008-Sensors:LSM303AHTRU1
1L_10uH_20%_1.51A_160mOhm003-Inductors:LTF5022T-100M1R3-DL2
1L_27nH_5%_0.35A_460mOhm003-Inductors:LQG15HS27NJ02DL3
1L_4.7uH_20%_1.7A_120mOhm003-Inductors:LQH3NPZ4R7MMELL4
1L_5.6nH_2%_1.77A_40mOhm003-Inductors:LQW15AN5N6G80DL1
1MIC5330-SSYML-TR004-Power:MIC5330U13
1RYLR998010-RF:RYLR998_flatU10
1R_0R_0603001-Resistors:R_0603_H0.55R2
1R_0R_1%_1/16W_0402001-Resistors:R_0402_H0.4R15
1R_10k_5%_1/16W_0402001-Resistors:R_0402_H0.4R6
1R_15k_1%_1/16W_0402001-Resistors:R_0402_H0.4R4
1R_1M_5%_1/16W_0402001-Resistors:R_0402_H0.4R1
1R_200k_1%_1/16W_0402001-Resistors:R_0402_H0.4R8
1R_68k_1%_1/16W_0402001-Resistors:R_0402_H0.4R3
1ST1S12GR004-Power:ST1S12GRU4
1STM32L431RCT6TR007-MCUs:LQFP-64_10x10mm_P0.5mmU11
1Solder_Jumper-2_Open009-Connectors:SolderJumper-2_OpenCN2
1TC2030-IDC009-Connectors:Debug_pads_6pinCN3
1TCA39306DCUR005-ICs:TCA39306DCURU2
1TESEO-LIV3R010-RF:TESEO-LIV3RU6
1TL3315NF160Q009-Connectors:TL3315NF160QSW4
1TPS61222DCKR004-Power:TPS61222DCKRU8
1TPS79318DBVR004-Power:TPS79318DBVRU9
1switch_slide_2pos009-Connectors:09.10290.01SW1

Similar boards

  • 2 layers74.5 × 40 mmMain Bike Print, the printed circuit board in 3D

    Main Bike Print

    IoT-Systems-Lab/Smart-Bike

    This repository contains the work for our Smart Bike project, part of the university IoT lab. The goal is to design a lightweight, low-power system that collects and transmits sensor data from a bicycle in real time —…

    128 parts
  • 2 layers40.5 × 29.6 mmGPS Compass GNSS, the printed circuit board in 3D

    GPS Compass GNSS

    bismarx-v1/GPS-Compass

    The compass that doesnt point to north, but it points to a GPS location, or a list of locations and points to the nearest one

    38 parts1
  • 8 layers37 × 40.5 mmWatch main, the printed circuit board in 3D

    Watch main

    ben5049/Smart-Watch

    This project aims to take a cheap, common smart watch and upgrade it by replacing the screen and all internal electronics with custom hardware.

    206 partsApache-2.0
  • 2 layers19 × 26.6 mmRev. 2, the printed circuit board in 3D

    Rev. 2

    attexx/teseo_liv3f_breakout_board

    TESEO-LIV3F Breakout Board

    28 parts
  • 4 layers20 × 55.7 mmQcomlt debugboard, the printed circuit board in 3D

    Qcomlt debugboard

    CodeLinaro-mirror/qcomlt_debugboard

    96boards specifications compliant Mezzanine used to control the DC Input, USB VBUS, PWR/RST buttons and Debug UART via a single USB2.0 CDC interface.

    40 partsCERN-OHL-P-2.0
  • 4 layers96.9 × 73.9 mmFatChudRuns, the printed circuit board in 3D

    FatChudRuns

    AerorKus/FatChudRuns

    Threadmill for the crusty-ass white rat dog Tofu

    104 parts
  • 2 layers140.7 × 91.3 mmV1.0 Prototype, the printed circuit board in 3D

    V1.0 Prototype

    mathieu0c/LaNuitPorteConseilKeyboard

    78 parts
  • 4 layers80 × 25 mmLidar pcb, the printed circuit board in 3D

    Lidar pcb

    TheKrystof007/Bakalarka

    Tento repozitář obsahuje veškerá hardwarová a softwarová data k bakalářské práci, která se zabývá integrací moderního 3D dToF (Direct Time-of-Flight) LiDAR senzoru VL53L9CX na palubu bezpilotního letounu (UAV) za účelem…

    53 parts

Questions

How big is the RelativeGPS PCB?

It measures 32.5 × 29.3 mm and has 4 copper layers, 1.6 mm thick.

What parts does the RelativeGPS use?

110 parts, built around the BGA725L6E6327FTSA1, TESEO-LIV3R, ST1S12GR and 74LVC1T45GW,125-JSM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the RelativeGPS KiCad files?

From the m-guihard/relativeGPS repository on GitHub, at the commit this page was made from: the board is PCB/relativeGPS.kicad_pcb and its schematic PCB/GPS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the RelativeGPS design in my own project?

Its repository states no licence, so its author keeps all rights: ask m-guihard before reusing the design.