
Pruebas
zalteck/MotaSensora
Art monitoring for optimal conservation (final degree project / master thesis)

V1.0 Prototype is an open-source printed circuit board by mathieu0c, from the mathieu0c/LaNuitPorteConseilKeyboard repository on GitHub. It is a 2-layer board of 140.7 × 91.3 mm with 78 parts on 195 nets, routed with 97 tracks and 3 vias.
It is built around the CH340E, HIH6130-021-001 and MC1413BD, with the W25Q128JVSIQ, SK6812MINI-E and USBLC6-2P6 among its other parts. Its parts include 22 resistors, 19 capacitors, 16 ICs, 10 diodes and 4 switches. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C7, C8, C10, C14, C15, C16, C17, C20, C21, C22, C23, C24, C25 |
| 6 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13, R14, R15, R16, R17, R18 |
| 5 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R9, R23, R24, R25 |
| 4 | SK6812MINI-E | CREPP_LEDs:SK6812MINI-E | U8, U12, U15, U16 |
| 4 | SR360 | Diode_SMD:D_SMA | D6, D7, D8, D11 |
| 4 | SW_HotSwap | HotSwapp_1U:Hotswap_1U | SW1, SW2, SW3, SW4 |
| 3 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R5, R10 |
| 3 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R22, R41, R42 |
| 3 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C6, C18 |
| 2 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8 |
| 2 | 1µF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C19, C26 |
| 2 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D10 |
| 2 | SS24 | Diode_SMD:D_SMA | D1, D5 |
| 2 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U1, U6 |
| 2 | USB_C_Receptacle | CREPP_Connectors_USB:USB_C_Receptacle_GCT_USB4085 | J1, J6 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 18 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | ACS712xLCTR-05B | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U10 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U14 |
| 1 | BAS16HT1G | Diode_SMD:D_SOD-323 | D4 |
| 1 | CH340E | Package_SO:MSOP-10_3x3mm_P0.5mm | U4 |
| 1 | DS3231Z | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | ECS-2520MV-250-DN-TR | Oscillator:Oscillator_SMD_ECS_2520MV-xxx-xx-4Pin_2.5x2.0mm | X1 |
| 1 | FTSH-107-01-L-DV-K-P-TR | CREPP_Connectors_1_27mm:SAMTEC_FTSH-107-01-L-DV-K-P-TR | J4 |
| 1 | HIH6130-021-001 | CREPP_Temperature_sensors:IC8_HIH6130-021-001_HNW | U13 |
| 1 | MC1413BD | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U3 |
| 1 | MPU-9250 | Sensor_Motion:InvenSense_QFN-24_3x3mm_P0.4mm | U5 |
| 1 | NMOS | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | OLED-PCB_MOUNT_128_64_30P_Pins | CREPP_Screens:SSD1306_OLED_0.96_PCB | DS2 |
| 1 | ST890 | CREPP_PMOS_CMS:ST890 | U11 |
| 1 | STM32F303RETx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U9 |
| 1 | Z3.3V | Diode_SMD:D_SOD-323 | D3 |

zalteck/MotaSensora
Art monitoring for optimal conservation (final degree project / master thesis)






Sooraj21s/High-Volt-Radiation-Detect-PCB
A PCB that converts the radiatoin detected by the geiger tube captured as milli volts to a high voltage by opamp & a buzzer is also provided in the module that triggers when the detected voltage reaches a certain…

DepBo/AquaCare
AquaCare là hệ thống theo dõi và quản lý nuôi trồng thủy sản, gồm ứng dụng web, ứng dụng di động và backend kết nối dữ liệu cảm biến với thiết bị trong ao/bể.
It measures 140.7 × 91.3 mm and has 2 copper layers, 1.6 mm thick.
78 parts, built around the CH340E, HIH6130-021-001, MC1413BD and W25Q128JVSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mathieu0c/LaNuitPorteConseilKeyboard repository on GitHub, at the commit this page was made from: the board is Hardware/V1.0_Prototype/PCB.kicad_pcb and its schematic Hardware/V1.0_Prototype/LevelShifter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask mathieu0c before reusing the design.