
STM32L496VGT3
STMicroelectronicsExtended
-40℃~+125℃ 1.71V~3.6V 12bit 12bit 1MB 32 Bit 320KB 80MHz 83 ARM Cortex-M4 Built-in FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHS
- Part id
- st/STM32L496VGT3
- Category
- Microcontrollers (MCU, MPU, SOC)
- Package
- LQFP-100(14x14)
- Pins
- 100
- In stock
- 8 at JLCPCB (C1337147)
- Used on
- 2 open-source boards
Overview
The STM32L496VGT3 is a microcontroller made by STMicroelectronics in a LQFP-100(14x14) package with 100 pins. -40℃~+125℃ 1.71V~3.6V 12bit 12bit 1MB 32 Bit 320KB 80MHz 83 ARM Cortex-M4 Built-in FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its KiCad symbol (MCU_ST_STM32L4:STM32L496VGTx, from KiCad's library) and its footprint (Package_QFP:LQFP-100_14x14mm_P0.5mm, from KiCad's library), ready for a KiCad board. 8 are in stock at JLCPCB (part C1337147). 2 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
20- Supply, least
- 1.71 V · VDD, recommended operating min · p. 1
- Supply, most
- 3.6 V · VDD, recommended operating max · p. 1
- Supply, absolute maximum
- 4 V · VDD, external main supply absolute max · p. 126
- Supply, least
- 1.08 V · VDDIO2, recommended operating min with PG[15:2] used · p. 127
- Supply, least
- 1.62 V · VDDA, recommended operating min with ADC or COMP used · p. 127
- Supply, least
- 1.8 V · VDDA, recommended operating min with DAC or OPAMP used · p. 127
- Supply, least
- 2.4 V · VDDA, recommended operating min with VREFBUF used · p. 127
- Supply, least
- 1.55 V · VBAT, recommended operating min · p. 127
- Supply, least
- 3 V · VDDUSB, recommended operating min with USB used · p. 127
- Works from
- -40 °C · suffix 3, operating ambient min · p. 276
- Works up to
- 125 °C · suffix 3, operating ambient max at maximum power dissipation · p. 276
- Junction, hottest
- 130 °C · suffix 3, operating junction max · p. 276
- Junction, hottest
- 150 °C · absolute maximum junction temperature · p. 127
- Takes working
- 9.44 mA · typical total MCU Run current, 80 MHz, Range 1, 25 °C, Flash cache on, peripherals disabled · p. 133
- Takes at most
- 12.4 mA · max total MCU Run current, 80 MHz, Range 1, 125 °C, Flash cache on, peripherals disabled · p. 133
- Takes asleep
- 24 nA · typical Shutdown current, 1.8 V, 25 °C, backup registers retained, RTC disabled · p. 153
- Takes asleep
- 108 nA · typical Standby current, 1.8 V, 25 °C, RTC and independent watchdog disabled · p. 151
- Takes asleep
- 2.57 µA · typical Stop 2 current, 1.8 V, 25 °C, RTC and LCD disabled · p. 146
- A pin gives at most
- 20 mA · absolute max sourced current per I/O or control pin · p. 126
- Junction to air (LQFP100 - 14 × 14mm)
- 42 K/W · junction-to-ambient thermal resistance · p. 273
What it is and has
12- Device family
- Arm based 32-bit microcontroller · p. 276
- Product type
- ultra-low-power · p. 276
- Flash memory
- 1 MByte · p. 276
- Pin count
- 100 · p. 276
- Package
- LQFP ECOPACK2 · p. 276
- Voltage regulator
- integrated LDO · p. 276
- Core
- Arm Cortex-M4, 32-bit, FPU, 100 DMIPS · p. 1
- SRAM
- 320 KB · p. 1
- USB
- USB OTG FS · p. 1
- Power management
- Ultra-low-power with FlexPowerControl · p. 1
- RTC
- HW calendar, alarms and calibration · p. 1
- Package
- LQFP100 (14 x 14) · p. 1
Around it
11- cap 100 nF
- between VDD and VSS; One per VDD supply pin, as n x 100 nF in the power supply scheme. · p. 124
- cap 4.7 μF
- between VDD and VSS; One additional capacitor for the VDD supply. · p. 124
- cap 100 nF
- between VDDIO2 and VSS; One per VDDIO2 supply pin, as m x100 nF in the power supply scheme. · p. 124
- cap 4.7 μF
- between VDDIO2 and VSS; Additional VDDIO2 supply capacitor. · p. 124
- cap 10 nF
- between VDDA and VSSA; In parallel with 1 uF in the power supply scheme. · p. 124
- cap 1 μF
- between VDDA and VSSA; In parallel with 10 nF in the power supply scheme. · p. 124
- cap 100 nF +1 μF
- between VREF+ and VREF-; Parallel reference decoupling capacitors in the power supply scheme. · p. 124
- cap 5 pF to 20 pF
- between OSC_IN and GND; CL1; typical range, high-quality ceramic for high-frequency applications; size to match crystal load including PCB and pin capacitance; place close to oscillator pins. · p. 163
- crystal 8 MHz
- between OSC_IN and OSC_OUT; Typical application in Figure 28; resonator and load capacitors should be placed close to oscillator pins. · p. 164
- cap 0.2 to 2 μF
- between VLCD and GND; External converter decoupling capacitor Cext; buffer OFF, BUFEN=0. · p. 209
- cap 1 to 2 μF
- between VLCD and GND; External converter decoupling capacitor Cext; buffer ON, BUFEN=1. · p. 209
Specifications
393| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| External main supply voltage (including VDD, VDDA, VDDIO2, VDDUSB, VLCD, VBAT) VDDX - VSS | Absolute maximum ratings | min -0.3 · max 4 V | 125 |
| Input voltage on TT_xx pins VIN | Absolute maximum ratings; minimum VSS−0.3 V | max 4 V | 125 |
| Input voltage on BOOT0 pin VIN | Absolute maximum ratings; minimum VSS | max 9 V | 125 |
| Input voltage on any other pins VIN | Absolute maximum ratings; minimum VSS−0.3 V | max 4 V | 125 |
| Variations between different VDDX power pins of the same domain |ΔVDDx| | max 50 mV | 126 | |
| Variations between all the different ground pins |VSSx-VSS| | Includes VREF- pin | max 50 mV | 126 |
| External main supply voltage (including VDD, VDDA, VDDUSB, VBAT, VREF+) VDDX-VSS | Absolute maximum ratings | min -0.3 · max 4 V | 126 |
| Allowed voltage difference for VREF+ > VDDA VREF+ - VDDA | max 0.4 V | 126 | |
| Total current into sum of all VDD power lines (source) ∑IVDD | max 150 mA | 126 | |
| Total current out of sum of all VSS ground lines (sink) ∑IVSS | max 150 mA | 126 | |
| Maximum current into each VDD power pin (source) IVDD(PIN) | max 100 mA | 126 | |
| Maximum current out of each VSS ground pin (sink) IVSS(PIN) | max 100 mA | 126 | |
| Output current sunk by any I/O and control pin except FT_f IIO(PIN) | max 20 mA | 126 | |
| Output current sunk by any FT_f pin IIO(PIN) | max 20 mA | 126 | |
| Output current sourced by any I/O and control pin IIO(PIN) | max 20 mA | 126 | |
| Total output current sunk by sum of all I/Os and control pins ∑IIO(PIN) | max 100 mA | 126 | |
| Total output current sourced by sum of all I/Os and control pins ∑IIO(PIN) | max 100 mA | 126 | |
| Injected current on FT_xxx, TT_xx, RST and B pins, except PA4, PA5 IINJ(PIN) | Negative/positive injection limits | min -5 · max 0 mA | 126 |
| Injected current on PA4, PA5 IINJ(PIN) | Negative/positive injection limits | min -5 · max 0 mA | 126 |
| Total injected current (sum of all I/Os and control pins) ∑|IINJ(PIN)| | max 25 mA | 126 | |
| Storage temperature range TSTG | min -65 · max 150 °C | 127 | |
| Maximum junction temperature TJ | Absolute maximum ratings | max 150 °C | 127 |
| Internal AHB clock frequency fHCLK | min 0 · max 80 MHz | 127 | |
| Internal APB1 clock frequency fPCLK1 | min 0 · max 80 MHz | 127 | |
| Internal APB2 clock frequency fPCLK2 | min 0 · max 80 MHz | 127 | |
| PG[15:2] I/Os supply voltage VDDIO2 | At least one I/O in PG[15:2] used | min 1.08 · max 3.6 V | 127 |
| PG[15:2] I/Os supply voltage VDDIO2 | PG[15:2] not used | min 0 · max 3.6 V | 127 |
| Analog supply voltage VDDA | VREFBUF used | min 2.4 · max 3.6 V | 127 |
| Backup operating voltage VBAT | min 1.55 · max 3.6 V | 127 | |
| USB supply voltage VDDUSB | USB used | min 3 · max 3.6 V | 127 |
| USB supply voltage VDDUSB | USB not used | min 0 · max 3.6 V | 127 |
| I/O input voltage VIN | TT_xx I/O; maximum VDDIOx+0.3 V | min -0.3 V | 127 |
| I/O input voltage VIN | BOOT0 | min 0 · max 9 V | 127 |
| Power dissipation at TA = 125 °C for suffix 3 PD | LQFP100 | max 119 mW | 128 |
| Ambient temperature for the suffix 3 version TA | Maximum power dissipation | min -40 · max 125 °C | 128 |
| Ambient temperature for the suffix 3 version TA | Low-power dissipation; TJ must not exceed TJmax | min -40 · max 130 °C | 128 |
| Junction temperature range TJ | Suffix 3 version | min -40 · max 130 °C | 128 |
| VDD rise time rate tVDD | Maximum ∞ | min 0 us/V | 128 |
| VDD fall time rate tVDD | Maximum ∞ | min 10 us/V | 128 |
| VDDA rise time rate tVDDA | Maximum ∞ | min 0 us/V | 128 |
| VDDA fall time rate tVDDA | Maximum ∞ | min 10 us/V | 128 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 26 MHz; 25 °C; HSE bypass; all peripherals disabled | typ 2.65 · max 2.9 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 26 MHz; 55 °C; HSE bypass; all peripherals disabled | typ 2.69 · max 3 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 26 MHz; 85 °C; HSE bypass; all peripherals disabled | typ 2.82 · max 3.3 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 26 MHz; 105 °C; HSE bypass; all peripherals disabled | typ 3.05 · max 3.8 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 26 MHz; 125 °C; HSE bypass; all peripherals disabled | typ 3.51 · max 4.7 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 16 MHz; 25 °C; HSE bypass; all peripherals disabled | typ 1.68 · max 1.9 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 16 MHz; 55 °C; HSE bypass; all peripherals disabled | typ 1.72 · max 2 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 16 MHz; 85 °C; HSE bypass; all peripherals disabled | typ 1.85 · max 2.2 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 16 MHz; 105 °C; HSE bypass; all peripherals disabled | typ 2.07 · max 2.7 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 16 MHz; 125 °C; HSE bypass; all peripherals disabled | typ 2.53 · max 3.7 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 8 MHz; 25 °C; HSE bypass; all peripherals disabled | typ 0.91 · max 1 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 8 MHz; 55 °C; HSE bypass; all peripherals disabled | typ 0.94 · max 1.1 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 8 MHz; 85 °C; HSE bypass; all peripherals disabled | typ 1.07 · max 1.4 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 8 MHz; 105 °C; HSE bypass; all peripherals disabled | typ 1.29 · max 1.8 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 8 MHz; 125 °C; HSE bypass; all peripherals disabled | typ 1.74 · max 2.8 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 4 MHz; 25 °C; HSE bypass; all peripherals disabled | typ 0.52 · max 0.6 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 4 MHz; 55 °C; HSE bypass; all peripherals disabled | typ 0.55 · max 0.7 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 4 MHz; 85 °C; HSE bypass; all peripherals disabled | typ 0.68 · max 0.9 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 4 MHz; 105 °C; HSE bypass; all peripherals disabled | typ 0.9 · max 1.4 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 4 MHz; 125 °C; HSE bypass; all peripherals disabled | typ 1.35 · max 2.4 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 2 MHz; 25 °C; HSE bypass; all peripherals disabled | typ 0.33 · max 0.4 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 2 MHz; 55 °C; HSE bypass; all peripherals disabled | typ 0.36 · max 0.5 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 2 MHz; 85 °C; HSE bypass; all peripherals disabled | typ 0.48 · max 0.7 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 2 MHz; 105 °C; HSE bypass; all peripherals disabled | typ 0.7 · max 1.2 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 2 MHz; 125 °C; HSE bypass; all peripherals disabled | typ 1.15 · max 2.2 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 1 MHz; 25 °C; HSE bypass; all peripherals disabled | typ 0.23 · max 0.3 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 1 MHz; 55 °C; HSE bypass; all peripherals disabled | typ 0.26 · max 0.4 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 1 MHz; 85 °C; HSE bypass; all peripherals disabled | typ 0.38 · max 0.6 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 1 MHz; 105 °C; HSE bypass; all peripherals disabled | typ 0.6 · max 1.1 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 1 MHz; 125 °C; HSE bypass; all peripherals disabled | typ 1.06 · max 2 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 100 kHz; 25 °C; HSE bypass; all peripherals disabled | typ 0.14 · max 0.2 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 100 kHz; 55 °C; HSE bypass; all peripherals disabled | typ 0.17 · max 0.3 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 100 kHz; 85 °C; HSE bypass; all peripherals disabled | typ 0.3 · max 0.5 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 100 kHz; 105 °C; HSE bypass; all peripherals disabled | typ 0.52 · max 1 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 2; 100 kHz; 125 °C; HSE bypass; all peripherals disabled | typ 0.97 · max 2 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 80 MHz; 25 °C; PLL on; all peripherals disabled | typ 9.44 · max 10.3 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 80 MHz; 55 °C; PLL on; all peripherals disabled | typ 9.5 · max 10.4 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 80 MHz; 85 °C; PLL on; all peripherals disabled | typ 9.67 · max 10.7 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 80 MHz; 105 °C; PLL on; all peripherals disabled | typ 9.93 · max 11.3 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 80 MHz; 125 °C; PLL on; all peripherals disabled | typ 10.4 · max 12.4 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 72 MHz; 25 °C; PLL on; all peripherals disabled | typ 8.52 · max 9.3 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 72 MHz; 55 °C; PLL on; all peripherals disabled | typ 8.59 · max 9.4 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 72 MHz; 85 °C; PLL on; all peripherals disabled | typ 8.75 · max 9.7 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 72 MHz; 105 °C; PLL on; all peripherals disabled | typ 9.01 · max 10.3 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 72 MHz; 125 °C; PLL on; all peripherals disabled | typ 9.53 · max 11.4 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 64 MHz; 25 °C; PLL on; all peripherals disabled | typ 7.61 · max 8.3 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 64 MHz; 55 °C; PLL on; all peripherals disabled | typ 7.67 · max 8.4 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 64 MHz; 85 °C; PLL on; all peripherals disabled | typ 7.83 · max 8.7 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 64 MHz; 105 °C; PLL on; all peripherals disabled | typ 8.09 · max 9.3 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 64 MHz; 125 °C; PLL on; all peripherals disabled | typ 8.61 · max 10.4 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 48 MHz; 25 °C; HSE bypass; all peripherals disabled | typ 5.72 · max 6.3 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 48 MHz; 55 °C; HSE bypass; all peripherals disabled | typ 5.78 · max 6.4 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 48 MHz; 85 °C; HSE bypass; all peripherals disabled | typ 5.94 · max 6.7 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 48 MHz; 105 °C; HSE bypass; all peripherals disabled | typ 6.2 · max 7.3 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 48 MHz; 125 °C; HSE bypass; all peripherals disabled | typ 6.72 · max 8.4 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 32 MHz; 25 °C; HSE bypass; all peripherals disabled | typ 3.87 · max 4.2 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 32 MHz; 55 °C; HSE bypass; all peripherals disabled | typ 3.92 · max 4.4 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 32 MHz; 85 °C; HSE bypass; all peripherals disabled | typ 4.07 · max 4.7 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 32 MHz; 105 °C; HSE bypass; all peripherals disabled | typ 4.33 · max 5.2 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 32 MHz; 125 °C; HSE bypass; all peripherals disabled | typ 4.84 · max 6.3 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 24 MHz; 25 °C; HSE bypass; all peripherals disabled | typ 2.94 · max 3.2 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 24 MHz; 55 °C; HSE bypass; all peripherals disabled | typ 2.99 · max 3.4 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 24 MHz; 85 °C; HSE bypass; all peripherals disabled | typ 3.14 · max 3.6 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 24 MHz; 105 °C; HSE bypass; all peripherals disabled | typ 3.39 · max 4.2 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 24 MHz; 125 °C; HSE bypass; all peripherals disabled | typ 3.9 · max 5.3 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 16 MHz; 25 °C; HSE bypass; all peripherals disabled | typ 2.01 · max 2.2 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 16 MHz; 55 °C; HSE bypass; all peripherals disabled | typ 2.06 · max 2.3 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 16 MHz; 85 °C; HSE bypass; all peripherals disabled | typ 2.2 · max 2.6 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 16 MHz; 105 °C; HSE bypass; all peripherals disabled | typ 2.45 · max 3.2 mA | 133 |
| Supply current in Run mode IDD_ALL(Run) | Range 1; 16 MHz; 125 °C; HSE bypass; all peripherals disabled | typ 2.95 · max 4.2 mA | 133 |
| Supply current in Low-power run mode IDD_ALL(LPRun) | 2 MHz; 25 °C; MSI; all peripherals disabled | typ 274 · max 318 uA | 133 |
| Supply current in Low-power run mode IDD_ALL(LPRun) | 2 MHz; 55 °C; MSI; all peripherals disabled | typ 307 · max 425 uA | 133 |
| Supply current in Low-power run mode IDD_ALL(LPRun) | 2 MHz; 85 °C; MSI; all peripherals disabled | typ 444 · max 656 uA | 133 |
| Supply current in Low-power run mode IDD_ALL(LPRun) | 2 MHz; 105 °C; MSI; all peripherals disabled | typ 678 · max 1167 uA | 133 |
| Supply current in Low-power run mode IDD_ALL(LPRun) | 2 MHz; 125 °C; MSI; all peripherals disabled | typ 1150 · max 2197 uA | 133 |
| Supply current in Low-power run mode IDD_ALL(LPRun) | 1 MHz; 25 °C; MSI; all peripherals disabled | typ 158 · max 195 uA | 133 |
| Supply current in Low-power run mode IDD_ALL(LPRun) | 1 MHz; 55 °C; MSI; all peripherals disabled | typ 195 · max 309 uA | 133 |
| Supply current in Low-power run mode IDD_ALL(LPRun) | 1 MHz; 85 °C; MSI; all peripherals disabled | typ 328 · max 558 uA | 133 |
| Supply current in Low-power run mode IDD_ALL(LPRun) | 1 MHz; 105 °C; MSI; all peripherals disabled | typ 564 · max 1047 uA | 133 |
| Supply current in Low-power run mode IDD_ALL(LPRun) | 1 MHz; 125 °C; MSI; all peripherals disabled | typ 1040 · max 2084 uA | 133 |
| Supply current in Low-power run mode IDD_ALL(LPRun) | 400 kHz; 25 °C; MSI; all peripherals disabled | typ 88.2 · max 116 uA | 133 |
| Supply current in Low-power run mode IDD_ALL(LPRun) | 400 kHz; 55 °C; MSI; all peripherals disabled | typ 123 · max 232 uA | 133 |
| Supply current in Low-power run mode IDD_ALL(LPRun) | 400 kHz; 85 °C; MSI; all peripherals disabled | typ 256 · max 485 uA | 133 |
| Supply current in Low-power run mode IDD_ALL(LPRun) | 400 kHz; 105 °C; MSI; all peripherals disabled | typ 490 · max 973 uA | 133 |
| Supply current in Low-power run mode IDD_ALL(LPRun) | 400 kHz; 125 °C; MSI; all peripherals disabled | typ 969 · max 2012 uA | 133 |
| Supply current in Low-power run mode IDD_ALL(LPRun) | 100 kHz; 25 °C; MSI; all peripherals disabled | typ 63 · max 79 uA | 133 |
| Supply current in Low-power run mode IDD_ALL(LPRun) | 100 kHz; 55 °C; MSI; all peripherals disabled | typ 90.6 · max 195 uA | 133 |
| Supply current in Low-power run mode IDD_ALL(LPRun) | 100 kHz; 85 °C; MSI; all peripherals disabled | typ 223 · max 447 uA | 133 |
| Supply current in Low-power run mode IDD_ALL(LPRun) | 100 kHz; 105 °C; MSI; all peripherals disabled | typ 457 · max 942 uA | 133 |
| Supply current in Low-power run mode IDD_ALL(LPRun) | 100 kHz; 125 °C; MSI; all peripherals disabled | typ 934 · max 1975 uA | 133 |
| Supply current in low-power sleep mode IDD_ALL(LPSleep) | 2 MHz; 25 °C; MSI; all peripherals disabled | typ 92.7 · max 105 uA | 146 |
| Supply current in low-power sleep mode IDD_ALL(LPSleep) | 2 MHz; 55 °C; MSI; all peripherals disabled | typ 124 · max 224 uA | 146 |
| Supply current in low-power sleep mode IDD_ALL(LPSleep) | 2 MHz; 85 °C; MSI; all peripherals disabled | typ 258 · max 474 uA | 146 |
| Supply current in low-power sleep mode IDD_ALL(LPSleep) | 2 MHz; 105 °C; MSI; all peripherals disabled | typ 487 · max 969 uA | 146 |
| Supply current in low-power sleep mode IDD_ALL(LPSleep) | 2 MHz; 125 °C; MSI; all peripherals disabled | typ 968 · max 2006 uA | 146 |
| Supply current in low-power sleep mode IDD_ALL(LPSleep) | 1 MHz; 25 °C; MSI; all peripherals disabled | typ 63.5 · max 75 uA | 146 |
| Supply current in low-power sleep mode IDD_ALL(LPSleep) | 1 MHz; 55 °C; MSI; all peripherals disabled | typ 97.5 · max 193 uA | 146 |
| Supply current in low-power sleep mode IDD_ALL(LPSleep) | 1 MHz; 85 °C; MSI; all peripherals disabled | typ 223 · max 446 uA | 146 |
| Supply current in low-power sleep mode IDD_ALL(LPSleep) | 1 MHz; 105 °C; MSI; all peripherals disabled | typ 460 · max 942 uA | 146 |
| Supply current in low-power sleep mode IDD_ALL(LPSleep) | 1 MHz; 125 °C; MSI; all peripherals disabled | typ 951 · max 1975 uA | 146 |
| Supply current in low-power sleep mode IDD_ALL(LPSleep) | 400 kHz; 25 °C; MSI; all peripherals disabled | typ 42.6 · max 54 uA | 146 |
| Supply current in low-power sleep mode IDD_ALL(LPSleep) | 400 kHz; 55 °C; MSI; all peripherals disabled | typ 75.6 · max 171 uA | 146 |
| Supply current in low-power sleep mode IDD_ALL(LPSleep) | 400 kHz; 85 °C; MSI; all peripherals disabled | typ 207 · max 426 uA | 146 |
| Supply current in low-power sleep mode IDD_ALL(LPSleep) | 400 kHz; 105 °C; MSI; all peripherals disabled | typ 443 · max 923 uA | 146 |
| Supply current in low-power sleep mode IDD_ALL(LPSleep) | 400 kHz; 125 °C; MSI; all peripherals disabled | typ 947 · max 1955 uA | 146 |
| Supply current in low-power sleep mode IDD_ALL(LPSleep) | 100 kHz; 25 °C; MSI; all peripherals disabled | typ 31.2 · max 44 uA | 146 |
| Supply current in low-power sleep mode IDD_ALL(LPSleep) | 100 kHz; 55 °C; MSI; all peripherals disabled | typ 67.6 · max 162 uA | 146 |
| Supply current in low-power sleep mode IDD_ALL(LPSleep) | 100 kHz; 85 °C; MSI; all peripherals disabled | typ 199 · max 420 uA | 146 |
| Supply current in low-power sleep mode IDD_ALL(LPSleep) | 100 kHz; 105 °C; MSI; all peripherals disabled | typ 437 · max 916 uA | 146 |
| Supply current in low-power sleep mode IDD_ALL(LPSleep) | 100 kHz; 125 °C; MSI; all peripherals disabled | typ 905 · max 1947 uA | 146 |
| Supply current in Stop 2 mode, RTC disabled IDD_ALL(Stop 2) | LCD disabled; VDD = 1.8 V; 25 °C | typ 2.57 · max 5.3 uA | 146 |
| Supply current in Stop 2 mode, RTC disabled IDD_ALL(Stop 2) | LCD disabled; VDD = 1.8 V; 55 °C | typ 6.86 · max 16.4 uA | 146 |
| Supply current in Stop 2 mode, RTC disabled IDD_ALL(Stop 2) | LCD disabled; VDD = 1.8 V; 85 °C | typ 25.2 · max 64 uA | 146 |
| Supply current in Stop 2 mode, RTC disabled IDD_ALL(Stop 2) | LCD disabled; VDD = 1.8 V; 105 °C | typ 60.1 · max 154.6 uA | 146 |
| Supply current in Stop 2 mode, RTC disabled IDD_ALL(Stop 2) | LCD disabled; VDD = 1.8 V; 125 °C | typ 135 · max 353 uA | 146 |
| Supply current in Stop 2 mode, RTC disabled IDD_ALL(Stop 2) | LCD disabled; VDD = 2.4 V; 25 °C | typ 2.62 · max 5.3 uA | 146 |
| Supply current in Stop 2 mode, RTC disabled IDD_ALL(Stop 2) | LCD disabled; VDD = 2.4 V; 55 °C | typ 6.91 · max 16.6 uA | 146 |
| Supply current in Stop 2 mode, RTC disabled IDD_ALL(Stop 2) | LCD disabled; VDD = 2.4 V; 85 °C | typ 25.5 · max 64.9 uA | 146 |
| Supply current in Stop 2 mode, RTC disabled IDD_ALL(Stop 2) | LCD disabled; VDD = 2.4 V; 105 °C | typ 60.6 · max 156.7 uA | 146 |
| Supply current in Stop 2 mode, RTC disabled IDD_ALL(Stop 2) | LCD disabled; VDD = 2.4 V; 125 °C | typ 137 · max 359 uA | 146 |
| Supply current in Stop 2 mode, RTC disabled IDD_ALL(Stop 2) | LCD disabled; VDD = 3 V; 25 °C | typ 2.69 · max 5.4 uA | 146 |
| Supply current in Stop 2 mode, RTC disabled IDD_ALL(Stop 2) | LCD disabled; VDD = 3 V; 55 °C | typ 6.93 · max 16.9 uA | 146 |
| Supply current in Stop 2 mode, RTC disabled IDD_ALL(Stop 2) | LCD disabled; VDD = 3 V; 85 °C | typ 25.7 · max 66.3 uA | 146 |
| Supply current in Stop 2 mode, RTC disabled IDD_ALL(Stop 2) | LCD disabled; VDD = 3 V; 105 °C | typ 61.5 · max 159.7 uA | 146 |
| Supply current in Stop 2 mode, RTC disabled IDD_ALL(Stop 2) | LCD disabled; VDD = 3 V; 125 °C | typ 140 · max 366 uA | 146 |
| Supply current in Stop 2 mode, RTC disabled IDD_ALL(Stop 2) | LCD disabled; VDD = 3.6 V; 25 °C | typ 2.7 · max 5.4 uA | 146 |
| Supply current in Stop 2 mode, RTC disabled IDD_ALL(Stop 2) | LCD disabled; VDD = 3.6 V; 55 °C | typ 7.08 · max 17.4 uA | 146 |
| Supply current in Stop 2 mode, RTC disabled IDD_ALL(Stop 2) | LCD disabled; VDD = 3.6 V; 85 °C | typ 26.3 · max 67.8 uA | 146 |
| Supply current in Stop 2 mode, RTC disabled IDD_ALL(Stop 2) | LCD disabled; VDD = 3.6 V; 105 °C | typ 62.9 · max 163.8 uA | 146 |
| Supply current in Stop 2 mode, RTC disabled IDD_ALL(Stop 2) | LCD disabled; VDD = 3.6 V; 125 °C | typ 143 · max 375 uA | 146 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown) | VDD = 1.8 V; 25 °C | typ 24 · max 85 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown) | VDD = 1.8 V; 55 °C | typ 161 · max 556 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown) | VDD = 1.8 V; 85 °C | typ 983 · max 3314 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown) | VDD = 1.8 V; 105 °C | typ 3020 · max 10498 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown) | VDD = 1.8 V; 125 °C | typ 8970 · max 31391 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown) | VDD = 2.4 V; 25 °C | typ 31 · max 111 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown) | VDD = 2.4 V; 55 °C | typ 193 · max 648 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown) | VDD = 2.4 V; 85 °C | typ 1150 · max 3844 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown) | VDD = 2.4 V; 105 °C | typ 3530 · max 11897 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown) | VDD = 2.4 V; 125 °C | typ 10300 · max 35017 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown) | VDD = 3 V; 25 °C | typ 44 · max 154 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown) | VDD = 3 V; 55 °C | typ 242 · max 780 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown) | VDD = 3 V; 85 °C | typ 1400 · max 4447 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown) | VDD = 3 V; 105 °C | typ 4260 · max 13473 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown) | VDD = 3 V; 125 °C | typ 12500 · max 39297 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown) | VDD = 3.6 V; 25 °C | typ 76 · max 236 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown) | VDD = 3.6 V; 55 °C | typ 338 · max 1009 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown) | VDD = 3.6 V; 85 °C | typ 1790 · max 5354 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown) | VDD = 3.6 V; 105 °C | typ 5220 · max 15679 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown) | VDD = 3.6 V; 125 °C | typ 14700 · max 44571 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 1.8 V; 25 °C | typ 225 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 1.8 V; 55 °C | typ 363 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 1.8 V; 85 °C | typ 1190 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 1.8 V; 105 °C | typ 3230 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 1.8 V; 125 °C | typ 9180 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 2.4 V; 25 °C | typ 314 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 2.4 V; 55 °C | typ 478 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 2.4 V; 85 °C | typ 1440 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 2.4 V; 105 °C | typ 3820 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 2.4 V; 125 °C | typ 10700 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 3 V; 25 °C | typ 421 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 3 V; 55 °C | typ 621 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 3 V; 85 °C | typ 1790 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 3 V; 105 °C | typ 4660 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 3 V; 125 °C | typ 12900 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 3.6 V; 25 °C | typ 561 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 3.6 V; 55 °C | typ 831 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 3.6 V; 85 °C | typ 2280 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 3.6 V; 105 °C | typ 5730 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 3.6 V; 125 °C | typ 15300 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 25 °C | typ 341 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 55 °C | typ 472 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 85 °C | typ 1303 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 105 °C | typ 3459 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 25 °C | typ 435 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 55 °C | typ 586 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 85 °C | typ 1572 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 105 °C | typ 4041 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3 V; 25 °C | typ 553 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3 V; 55 °C | typ 732 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3 V; 85 °C | typ 1982 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3 V; 105 °C | typ 5145 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 25 °C | typ 716 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 55 °C | typ 948 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 85 °C | typ 2520 nA | 153 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD_ALL (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 105 °C | typ 6325 nA | 153 |
| Supply current during wakeup from Shutdown mode IDD_ALL (wakeup from Shutdown) | VDD = 3 V; 25 °C; wakeup clock MSI = 4 MHz; code execution from Flash | typ 0.6 mA | 153 |
| Bus Matrix | AHB; Range 1 | typ 4.44 uA/MHz | 156 |
| Bus Matrix | AHB; Range 2 | typ 3.75 uA/MHz | 156 |
| Bus Matrix | AHB; Low-power run and sleep | typ 4 uA/MHz | 156 |
| ADC independent clock domain | AHB; Range 1 | typ 0.4 uA/MHz | 156 |
| ADC independent clock domain | AHB; Range 2 | typ 0.08 uA/MHz | 156 |
| ADC independent clock domain | AHB; Low-power run and sleep | typ 0.3 uA/MHz | 156 |
| ADC AHB clock domain | AHB; Range 1 | typ 5.55 uA/MHz | 156 |
| ADC AHB clock domain | AHB; Range 2 | typ 4.63 uA/MHz | 156 |
| ADC AHB clock domain | AHB; Low-power run and sleep | typ 5 uA/MHz | 156 |
| CRC | AHB; Range 1 | typ 0.48 uA/MHz | 156 |
| CRC | AHB; Range 2 | typ 0.42 uA/MHz | 156 |
| CRC | AHB; Low-power run and sleep | typ 0.5 uA/MHz | 156 |
| DMA1 | AHB; Range 1 | typ 2 uA/MHz | 156 |
| DMA1 | AHB; Range 2 | typ 1.6 uA/MHz | 156 |
| DMA1 | AHB; Low-power run and sleep | typ 2 uA/MHz | 156 |
| DMA2 | AHB; Range 1 | typ 1.76 uA/MHz | 156 |
| DMA2 | AHB; Range 2 | typ 1.5 uA/MHz | 156 |
| DMA2 | AHB; Low-power run and sleep | typ 1.5 uA/MHz | 156 |
| DMA2D | AHB; Range 1 | typ 24.33 uA/MHz | 156 |
| DMA2D | AHB; Range 2 | typ 20.21 uA/MHz | 156 |
| DMA2D | AHB; Low-power run and sleep | typ 24.5 uA/MHz | 156 |
| FLASH | AHB; Range 1 | typ 8.5 uA/MHz | 156 |
| FLASH | AHB; Range 2 | typ 7.1 uA/MHz | 156 |
| FLASH | AHB; Low-power run and sleep | typ 8 uA/MHz | 156 |
| FMC | AHB; Range 1 | typ 7.58 uA/MHz | 156 |
| FMC | AHB; Range 2 | typ 6.29 uA/MHz | 156 |
| FMC | AHB; Low-power run and sleep | typ 7 uA/MHz | 156 |
| GPIOA | AHB; Range 1 | typ 1.59 uA/MHz | 156 |
| GPIOA | AHB; Range 2 | typ 1.25 uA/MHz | 156 |
| GPIOA | AHB; Low-power run and sleep | typ 1.5 uA/MHz | 156 |
| GPIOB | AHB; Range 1 | typ 1.56 uA/MHz | 156 |
| GPIOB | AHB; Range 2 | typ 1.25 uA/MHz | 156 |
| GPIOB | AHB; Low-power run and sleep | typ 1.5 uA/MHz | 156 |
| GPIOC | AHB; Range 1 | typ 1.58 uA/MHz | 156 |
| GPIOC | AHB; Range 2 | typ 1.29 uA/MHz | 156 |
| GPIOC | AHB; Low-power run and sleep | typ 1.5 uA/MHz | 156 |
| GPIOD | AHB; Range 1 | typ 1.4 uA/MHz | 156 |
| GPIOD | AHB; Range 2 | typ 1.17 uA/MHz | 156 |
| GPIOD | AHB; Low-power run and sleep | typ 1.4 uA/MHz | 156 |
| GPIOE | AHB; Range 1 | typ 1.36 uA/MHz | 156 |
| GPIOE | AHB; Range 2 | typ 1.13 uA/MHz | 156 |
| GPIOE | AHB; Low-power run and sleep | typ 1.4 uA/MHz | 156 |
| GPIOF | AHB; Range 1 | typ 1.7 uA/MHz | 156 |
| GPIOF | AHB; Range 2 | typ 1.4 uA/MHz | 156 |
| GPIOF | AHB; Low-power run and sleep | typ 1.5 uA/MHz | 156 |
| GPIOG | AHB; Range 1 | typ 1.8 uA/MHz | 156 |
| GPIOG | AHB; Range 2 | typ 1.5 uA/MHz | 156 |
| GPIOG | AHB; Low-power run and sleep | typ 1.8 uA/MHz | 156 |
| GPIOH | AHB; Range 1 | typ 1.5 uA/MHz | 156 |
| GPIOH | AHB; Range 2 | typ 1.3 uA/MHz | 156 |
| GPIOH | AHB; Low-power run and sleep | typ 1.5 uA/MHz | 156 |
| GPIOI | AHB; Range 1 | typ 1.18 uA/MHz | 156 |
| GPIOI | AHB; Range 2 | typ 0.96 uA/MHz | 156 |
| GPIOI | AHB; Low-power run and sleep | typ 1 uA/MHz | 156 |
| DCMI | AHB; Range 1 | typ 1.6 uA/MHz | 156 |
| DCMI | AHB; Range 2 | typ 1.3 uA/MHz | 156 |
| DCMI | AHB; Low-power run and sleep | typ 1.2 uA/MHz | 156 |
| OTG_FS independent clock domain | AHB; Range 1; Range 2 and Low-power run and sleep: NA | typ 23.2 uA/MHz | 156 |
| OTG_FS AHB clock domain | AHB; Range 1; Range 2 and Low-power run and sleep: NA | typ 14.3 uA/MHz | 156 |
| QUADSPI | AHB; Range 1 | typ 6.84 uA/MHz | 156 |
| QUADSPI | AHB; Range 2 | typ 5.67 uA/MHz | 156 |
| QUADSPI | AHB; Low-power run and sleep | typ 6.5 uA/MHz | 156 |
| All APB2 on | APB2; Range 1 | typ 55.4 uA/MHz | 159 |
| All APB2 on | APB2; Range 2 | typ 41.33 uA/MHz | 159 |
| All APB2 on | APB2; Low-power run and sleep | typ 46 uA/MHz | 159 |
| ALL | Range 1 | typ 234.98 uA/MHz | 159 |
| ALL | Range 2 | typ 195.83 uA/MHz | 159 |
| ALL | Low-power run and sleep | typ 235.7 uA/MHz | 159 |
| Wakeup time from Sleep mode to Run mode tWUSLEEP | typ 6 · max 6 Nb of CPU cycles | 159 | |
| Wakeup time from Low-power sleep mode to Low-power run mode tWULPSLEEP | Wakeup in Flash with Flash in power-down during low-power sleep mode (SLEEP_PD=1 in FLASH_ACR) and with clock MSI = 2 MHz | typ 7 · max 9 Nb of CPU cycles | 159 |
| Wake up time from Stop 0 mode to Run mode in Flash tWUSTOP0 | Range 1; Wakeup clock MSI = 48 MHz | typ 7 · max 11.6 us | 159 |
| Wake up time from Stop 0 mode to Run mode in Flash tWUSTOP0 | Range 1; Wakeup clock HSI16 = 16 MHz | typ 6.2 · max 10.7 us | 159 |
| Wake up time from Stop 0 mode to Run mode in Flash tWUSTOP0 | Range 2; Wakeup clock MSI = 24 MHz | typ 7.3 · max 11.7 us | 159 |
| Wake up time from Stop 0 mode to Run mode in Flash tWUSTOP0 | Range 2; Wakeup clock HSI16 = 16 MHz | typ 6.2 · max 10.7 us | 159 |
| Wake up time from Stop 0 mode to Run mode in Flash tWUSTOP0 | Range 2; Wakeup clock MSI = 4 MHz | typ 7.6 · max 13.2 us | 159 |
| Wake up time from Stop 0 mode to Run mode in SRAM1 tWUSTOP0 | Range 1; Wakeup clock MSI = 48 MHz | typ 2.5 · max 2.9 us | 159 |
| Wake up time from Stop 0 mode to Run mode in SRAM1 tWUSTOP0 | Range 1; Wakeup clock HSI16 = 16 MHz | typ 2.7 · max 2.9 us | 159 |
| Wake up time from Stop 0 mode to Run mode in SRAM1 tWUSTOP0 | Range 2; Wakeup clock MSI = 24 MHz | typ 3.2 · max 3.6 us | 159 |
| Wake up time from Stop 0 mode to Run mode in SRAM1 tWUSTOP0 | Range 2; Wakeup clock HSI16 = 16 MHz | typ 2.7 · max 2.9 us | 159 |
| Wake up time from Stop 0 mode to Run mode in SRAM1 tWUSTOP0 | Range 2; Wakeup clock MSI = 4 MHz | typ 5.7 · max 13.2 us | 159 |
| Wake up time from Stop 1 mode to Run mode in Flash tWUSTOP1 | Range 1; Wakeup clock MSI = 48 MHz | typ 8.4 · max 9.4 us | 160 |
| Wake up time from Stop 1 mode to Run mode in Flash tWUSTOP1 | Range 1; Wakeup clock HSI16 = 16 MHz | typ 7.8 · max 8.4 us | 160 |
| Wake up time from Stop 1 mode to Run mode in Flash tWUSTOP1 | Range 2; Wakeup clock MSI = 24 MHz | typ 8.7 · max 9.6 us | 160 |
| Wake up time from Stop 1 mode to Run mode in Flash tWUSTOP1 | Range 2; Wakeup clock HSI16 = 16 MHz | typ 7.8 · max 8.3 us | 160 |
| Wake up time from Stop 1 mode to Run mode in Flash tWUSTOP1 | Range 2; Wakeup clock MSI = 4 MHz | typ 8 · max 12.9 us | 160 |
| Wake up time from Stop 1 mode to Run mode in SRAM1 tWUSTOP1 | Range 1; Wakeup clock MSI = 48 MHz | typ 5.5 · max 5.9 us | 160 |
| Wake up time from Stop 1 mode to Run mode in SRAM1 tWUSTOP1 | Range 1; Wakeup clock HSI16 = 16 MHz | typ 6.6 · max 7 us | 160 |
| Wake up time from Stop 1 mode to Run mode in SRAM1 tWUSTOP1 | Range 2; Wakeup clock MSI = 24 MHz | typ 6.1 · max 6.5 us | 160 |
| Wake up time from Stop 1 mode to Run mode in SRAM1 tWUSTOP1 | Range 2; Wakeup clock HSI16 = 16 MHz | typ 6.6 · max 7 us | 160 |
| Wake up time from Stop 1 mode to Run mode in SRAM1 tWUSTOP1 | Range 2; Wakeup clock MSI = 4 MHz | typ 8.5 · max 12.8 us | 160 |
| Wake up time from Stop 1 mode to Low-power run mode in Flash tWUSTOP1 | Regulator in low-power mode (LPR=1 in PWR_CR1); Wakeup clock MSI = 2 MHz | typ 13.8 · max 20 us | 160 |
| Wake up time from Stop 1 mode to Low-power run mode in SRAM1 tWUSTOP1 | Regulator in low-power mode (LPR=1 in PWR_CR1); Wakeup clock MSI = 2 MHz | typ 11.8 · max 22 us | 160 |
| Wake up time from Stop 2 mode to Run mode in Flash tWUSTOP2 | Range 1; Wakeup clock MSI = 48 MHz | typ 8.9 · max 9.8 us | 160 |
| Wake up time from Stop 2 mode to Run mode in Flash tWUSTOP2 | Range 1; Wakeup clock HSI16 = 16 MHz | typ 8.3 · max 9.2 us | 160 |
| Wake up time from Stop 2 mode to Run mode in Flash tWUSTOP2 | Range 2; Wakeup clock MSI = 24 MHz | typ 9.3 · max 10.2 us | 160 |
| Wake up time from Stop 2 mode to Run mode in Flash tWUSTOP2 | Range 2; Wakeup clock HSI16 = 16 MHz | typ 8.2 · max 9.2 us | 160 |
| Wake up time from Stop 2 mode to Run mode in Flash tWUSTOP2 | Range 2; Wakeup clock MSI = 4 MHz | typ 14.2 · max 16.1 us | 160 |
| Wake up time from Stop 2 mode to Run mode in SRAM1 tWUSTOP2 | Range 1; Wakeup clock MSI = 48 MHz | typ 6.1 · max 7.1 us | 160 |
| Wake up time from Stop 2 mode to Run mode in SRAM1 tWUSTOP2 | Range 1; Wakeup clock HSI16 = 16 MHz | typ 7.2 · max 8.1 us | 160 |
| Wake up time from Stop 2 mode to Run mode in SRAM1 tWUSTOP2 | Range 2; Wakeup clock MSI = 24 MHz | typ 6.8 · max 7.8 us | 160 |
| Wake up time from Stop 2 mode to Run mode in SRAM1 tWUSTOP2 | Range 2; Wakeup clock HSI16 = 16 MHz | typ 7.2 · max 8.2 us | 160 |
| Wake up time from Stop 2 mode to Run mode in SRAM1 tWUSTOP2 | Range 2; Wakeup clock MSI = 4 MHz | typ 8.4 · max 16.7 us | 160 |
| Wakeup time from Standby mode to Run mode tWUSTBY | Range 1; Wakeup clock MSI = 8 MHz | typ 15.3 · max 23.2 us | 160 |
| Wakeup time from Standby mode to Run mode tWUSTBY | Range 1; Wakeup clock MSI = 4 MHz | typ 21.3 · max 30.5 us | 160 |
| Wakeup time from Standby with SRAM2 to Run mode tWUSTBY SRAM2 | Range 1; Wakeup clock MSI = 8 MHz | typ 15.3 · max 23.1 us | 160 |
| Wakeup time from Standby with SRAM2 to Run mode tWUSTBY SRAM2 | Range 1; Wakeup clock MSI = 4 MHz | typ 21.3 · max 30.6 us | 160 |
| Wakeup time from Shutdown mode to Run mode tWUSHDN | Range 1; Wakeup clock MSI = 4 MHz | typ 305.9 · max 322.3 us | 160 |
| Oscillator frequency fOSC_IN | min 4 · typ 8 · max 48 MHz | 163 | |
| Feedback resistor RF | typ 200 kΩ | 163 | |
| HSE current consumption IDD(HSE) | During startup; occurs during the first 2/3 of the startup time | max 5.5 mA | 163 |
| HSE current consumption IDD(HSE) | VDD = 3 V; Rm = 30 Ω; CL = 10 pF@8 MHz | typ 0.44 mA | 163 |
| HSE current consumption IDD(HSE) | VDD = 3 V; Rm = 45 Ω; CL = 10 pF@8 MHz | typ 0.45 mA | 163 |
| HSE current consumption IDD(HSE) | VDD = 3 V; Rm = 30 Ω; CL = 5 pF@48 MHz | typ 0.68 mA | 163 |
| HSE current consumption IDD(HSE) | VDD = 3 V; Rm = 30 Ω; CL = 10 pF@48 MHz | typ 0.94 mA | 163 |
| HSE current consumption IDD(HSE) | VDD = 3 V; Rm = 30 Ω; CL = 20 pF@48 MHz | typ 1.77 mA | 163 |
| Maximum critical crystal transconductance Gm | Startup | max 1.5 mA/V | 163 |
| Startup time tSU(HSE) | VDD is stabilized; stabilized 8 MHz oscillation | typ 2 ms | 163 |
| LSE current consumption IDD(LSE) | LSEDRV[1:0] = 00; Low drive capability | typ 250 nA | 164 |
| LSE current consumption IDD(LSE) | LSEDRV[1:0] = 01; Medium low drive capability | typ 315 nA | 164 |
| LSE current consumption IDD(LSE) | LSEDRV[1:0] = 10; Medium high drive capability | typ 500 nA | 164 |
| LSE current consumption IDD(LSE) | LSEDRV[1:0] = 11; High drive capability | typ 630 nA | 164 |
| Maximum critical crystal gm Gmcritmax | LSEDRV[1:0] = 00; Low drive capability | max 0.5 uA/V | 164 |
| Maximum critical crystal gm Gmcritmax | LSEDRV[1:0] = 01; Medium low drive capability | max 0.75 uA/V | 164 |
| Maximum critical crystal gm Gmcritmax | LSEDRV[1:0] = 10; Medium high drive capability | max 1.7 uA/V | 164 |
| Maximum critical crystal gm Gmcritmax | LSEDRV[1:0] = 11; High drive capability | max 2.7 uA/V | 164 |
| Startup time tSU(LSE) | VDD is stabilized | typ 2 s | 164 |
| Electrostatic discharge voltage (human body model) VESD(HBM) | TA = +25 °C, conforming to ANSI/ESDA/JEDEC JS-001; Class 2 | max 2000 V | 175 |
| Electrostatic discharge voltage (charge device model) VESD(CDM) | TA = +25 °C, conforming to ANSI/ESD STM5.3.1; Class C3 | max 250 V | 175 |
| Output low level voltage for an I/O pin VOL | CMOS port; |IIO| = 8 mA; VDDIOx ≥ 2.7 V | max 0.4 V | 179 |
| Output low level voltage for an I/O pin VOL | TTL port; |IIO| = 8 mA; VDDIOx ≥ 2.7 V | max 0.4 V | 179 |
| Output high level voltage for an I/O pin VOH | TTL port; |IIO| = 8 mA; VDDIOx ≥ 2.7 V | min 2.4 V | 179 |
| Output low level voltage for an I/O pin VOL | |IIO| = 20 mA; VDDIOx ≥ 2.7 V | max 1.3 V | 179 |
| Output low level voltage for an I/O pin VOL | |IIO| = 4 mA; VDDIOx ≥ 1.62 V | max 0.45 V | 179 |
| Output low level voltage for an FT I/O pin in FM+ mode (FT I/O with "f" option) VOLFM+ | |IIO| = 20 mA; VDDIOx ≥ 2.7 V | max 0.4 V | 179 |
| Output low level voltage for an FT I/O pin in FM+ mode (FT I/O with "f" option) VOLFM+ | |IIO| = 10 mA; VDDIOx ≥ 1.62 V | max 0.4 V | 179 |
| Output low level voltage for an FT I/O pin in FM+ mode (FT I/O with "f" option) VOLFM+ | |IIO| = 2 mA; 1.62 V ≥ VDDIOx ≥ 1.08 V | max 0.4 V | 179 |
| Ratio on VBAT measurement Q | typ 3 - | 209 | |
| Error on Q Er | min -10 · max 10 % | 209 | |
| ADC sampling time when reading the VBAT tS_vbat | min 12 us | 209 | |
| Battery charging resistor RBC | VBRS = 0 | typ 5 kΩ | 209 |
| Battery charging resistor RBC | VBRS = 1 | typ 1.5 kΩ | 209 |
| LCD external voltage VLCD | max 3.6 V | 209 | |
| LCD internal reference voltage 0 VLCD0 | typ 2.62 V | 209 | |
| LCD internal reference voltage 1 VLCD1 | typ 2.76 V | 209 | |
| LCD internal reference voltage 2 VLCD2 | typ 2.89 V | 209 | |
| LCD internal reference voltage 3 VLCD3 | typ 3.04 V | 209 | |
| LCD internal reference voltage 4 VLCD4 | typ 3.19 V | 209 | |
| LCD internal reference voltage 5 VLCD5 | typ 3.32 V | 209 | |
| LCD internal reference voltage 6 VLCD6 | typ 3.46 V | 209 | |
| LCD internal reference voltage 7 VLCD7 | typ 3.62 V | 209 | |
| VLCD external capacitance Cext | Buffer OFF (BUFEN=0 is LCD_CR register) | min 0.2 · max 2 uF | 209 |
| VLCD external capacitance Cext | Buffer ON (BUFEN=1 is LCD_CR register) | min 1 · max 2 uF | 209 |
| Supply current from VDD at VDD = 2.2 V ILCD | Buffer OFF (BUFEN=0 is LCD_CR register) | typ 3 uA | 209 |
| Supply current from VDD at VDD = 3.0 V ILCD | Buffer OFF (BUFEN=0 is LCD_CR register) | typ 1.5 uA | 209 |
| Pull up resistor on PA12 (USB_FS_DP) RPU | VIN = VSS, during idle | min 0.9 · typ 1.25 · max 1.575 kΩ | 225 |
| Pull up resistor on PA12 (USB_FS_DP) RPU | VIN = VSS during reception | min 1.425 · typ 2.25 · max 3.09 kΩ | 225 |
| Pull up resistor on PA10 (OTG_FS_ID) RPU | max 14.5 kΩ | 225 | |
| Rise time in LS trLS | CL = 200 to 600 pF | min 75 · max 300 ns | 225 |
| Fall time in LS tfLS | CL = 200 to 600 pF | min 75 · max 300 ns | 225 |
| Rise/ fall time matching in LS trfmLS | tr/tf | min 80 · max 125 % | 225 |
| Rise time in FS trFS | CL = 50 pF | min 4 · max 20 ns | 225 |
| Fall time in FS tfFS | CL = 50 pF | min 4 · max 20 ns | 225 |
| Rise/ fall time matching in FS trfmFS | tr/tf | min 90 · max 111 % | 225 |
| Output signal crossover voltage (LS/FS) VCRS | min 1.3 · max 2 V | 225 | |
| Output driver impedance ZDRV | Driving high or low | min 28 · max 44 Ω | 225 |
Open-source boards using it
2- 4 layers43 × 43 mm

- 4 layers43 × 43 mm

LED Redesign Design1
vt-aoe-nanosat-avionics/Hokie-Sat-Experimental-Board-Design
This repository gives the updated board design of the ta-expt (Or newly renamed Hokie Sat Experimental Board) with 3 different board designs.
56 parts
Parts like it
8STM32F407VGT6
LQFP-100(14x14)-40℃~+85℃ 1.8V~3.6V 12bit 12bit 168MHz 192KB 1MB 32 Bit 82 ARM Cortex-M4 Built-in FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)GD32F303VET6
LQFP-100(14x14)120MHz 12bit 12bit 2.6V~3.6V 512KB 80 ARM Cortex-M4 FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSGigaDevice Semicon BeijingMicrocontrollers (MCU/MPU/SOC)GD32F407VET6
LQFP-100(14x14)12bit 12bit 168MHz 2.6V~3.6V 512KB 82 ARM Cortex-M4 FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSGigaDevice Semicon BeijingMicrocontrollers (MCU/MPU/SOC)GD32F407VGT6
LQFP-100(14x14)12bit 12bit 168MHz 2.6V~3.6V 512KB 82 ARM Cortex-M4 FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSGigaDevice Semicon BeijingMicrocontrollers (MCU/MPU/SOC)GD32F470VIT6
LQFP-100(14x14)12bit 12bit 240MHz 2MB 82 ARM Cortex-M4 FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSGigaDevice Semicon BeijingMicrocontrollers (MCU/MPU/SOC)FS32K144UAT0VLLT
LQFP-100(14x14)-40℃~+105℃ 112MHz 2.7V~5.5V 32 Bit 4KB 512KB 64KB 89 ARM Cortex-M4F Built-in FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSNXP SemiconductorsMicrocontrollers (MCU/MPU/SOC)LPC1768FBD100K
LQFP-100(14x14)-40℃~+85℃ 100MHz 10bit 12bit 2.4V~3.6V 32 Bit 512KB 64KB 70 ARM Cortex-M3 Built-in FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSNXP SemiconductorsMicrocontrollers (MCU/MPU/SOC)STM32F407VET6
LQFP-100(14x14)-40℃~+85℃ 1.8V~3.6V 12bit 12bit 168MHz 192KB 32 Bit 512KB 82 ARM Cortex-M4 Built-in FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
Questions
Is there a KiCad symbol and footprint for the STM32L496VGT3?
Yes. The symbol is MCU_ST_STM32L4:STM32L496VGTx and the footprint Package_QFP:LQFP-100_14x14mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the STM32L496VGT3?
LQFP-100(14x14), with 100 pins. Its footprint is drawn on this page.
Where is the STM32L496VGT3 datasheet?
STMicroelectronics publishes it: the Datasheet link on this page opens it.
Where can I order the STM32L496VGT3?
JLCPCB lists it as part C1337147, with 8 in stock; the sellers' links on this page open their listings.
What can replace the STM32L496VGT3?
Parts like it in the library: the STM32F407VGT6 by STMicroelectronics, the GD32F303VET6 by GigaDevice Semicon Beijing, the GD32F407VET6 by GigaDevice Semicon Beijing and the GD32F407VGT6 by GigaDevice Semicon Beijing. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the STM32L496VGT3?
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.