
STM32H563RIT6
STMicroelectronicsExtended
-40℃~+85℃ 1.71V~3.6V 250MHz 2MB 32 Bit 53 640KB ARM Cortex-M33 Built-in+External FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHS
- Part id
- st/STM32H563RIT6
- Category
- Microcontrollers (MCU, MPU, SOC)
- Package
- LQFP-64(10x10)
- Pins
- 64
- In stock
- 0 at JLCPCB (C20619634)
- Used on
- 2 open-source boards
Overview
The STM32H563RIT6 is a microcontroller made by STMicroelectronics in a LQFP-64(10x10) package with 64 pins. -40℃~+85℃ 1.71V~3.6V 250MHz 2MB 32 Bit 53 640KB ARM Cortex-M33 Built-in+External FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its KiCad symbol (MCU_ST_STM32H5:STM32H563RITx, from KiCad's library) and its footprint (Package_QFP:LQFP-64_10x10mm_P0.5mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C20619634). 2 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
20- Supply, least
- 1.71 V · VDD, recommended operating min, HSLV = 0 · p. 124
- Supply, most
- 3.6 V · VDD, recommended operating max, HSLV = 0 · p. 124
- Supply, least
- 1.08 V · VDDIO2, recommended operating min, used I/Os, HSLV = 0 · p. 125
- Supply, most
- 2.7 V · VDDIO2, recommended operating max, used I/Os, HSLV = 1 · p. 125
- Supply, least
- 3 V · VDDUSB, recommended operating min, USB used · p. 125
- Supply, least
- 1.62 V · VDDA, recommended operating min, ADC used · p. 125
- Supply, least
- 1.8 V · VDDA, recommended operating min, DAC used · p. 125
- Supply, least
- 2.1 V · VDDA, recommended operating min, VREFBUF used · p. 125
- Supply, least
- 1.2 V · VBAT, recommended operating min · p. 125
- Supply, absolute maximum
- 4 V · VDDx - VSS, absolute max, including VDDA, VDDUSB, VDDIO2, VBAT and VREF+ · p. 123
- Works from
- -40 °C · TA, suffix 6, maximum power dissipation min · p. 127
- Works up to
- 85 °C · TA, suffix 6, maximum power dissipation max · p. 127
- Works up to
- 125 °C · TA, suffix 6, LDO bypass mode max · p. 127
- Junction, hottest
- 130 °C · TJ, absolute max; limited to 105 °C in VOS0 · p. 124
- Takes working
- 32.1 mA · IDD(Run), typical LDO, 250 MHz, VOS0, peripherals disabled, flash, 2-way cache and prefetch on · p. 135
- Takes at most
- 140 mA · IDD(Run), max LDO, 250 MHz, VOS0, all peripherals enabled, TJ = 105 °C · p. 135
- Takes asleep
- 2.58 µA · IDD(standby), typical, 1.8 V, backup RAM off, RTC and LSE off, IWDG off · p. 140
- A pin gives at most
- 20 mA · IIO(PIN), absolute max, sunk or sourced by any I/O and control pin · p. 124
- Junction to air (LQFP64 (10 x 10 mm))
- 48.1 K/W · junction to ambient · p. 262
- Junction to board (LQFP64 (10 x 10 mm))
- 24.1 K/W · junction to board · p. 262
What it is and has
12- Core
- Arm Cortex-M33, TrustZone, FPU · p. 1
- CPU clock
- 250 MHz · p. 1
- SRAM
- 640 Kbytes; SRAM2 ECC and SRAM3 flexible ECC · p. 1
- OTP memory
- 2 Kbytes · p. 1
- Backup SRAM
- 4 Kbytes · p. 1
- Instruction cache
- 8 Kbytes · p. 1
- Data cache
- 4 Kbytes for external memories · p. 1
- SD/SDIO/MMC
- Two interfaces · p. 1
- Low-power modes
- Sleep, Stop, Standby · p. 1
- Package option
- LQFP64 (10 x 10 mm) · p. 1
- Core
- Arm Cortex-M33 32-bit MCU, TrustZone, FPU, 375 DMIPS · p. 1
- Clock
- 250 MHz · p. 1
Specifications
365| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| External main supply voltage (including VDDSMPS(2), VDDA, VDDUSB, VDDIO2(2)(3)(4), VBAT, and VREF+) VDDx - VSS | min -0.3 · max 4 V | 123 | |
| I/O supply when HSLV(2) = 0 VDDIOx(4) - VSS | HSLV = 0 | min -0.3 · max 4 V | 123 |
| I/O supply when HSLV(2) = 1 VDDIOx(4) - VSS | HSLV = 1 | min -0.3 · max 2.75 V | 123 |
| Input voltage on TT_xx pins VIN(5) | Minimum VSS - 0.3 | max 4 V | 123 |
| Input voltage on FT_c pins VIN(5) | Minimum VSS - 0.3 | max 5.5 V | 123 |
| Input voltage on any other pins VIN(5) | Minimum VSS - 0.3 | max 4 V | 123 |
| Allowed voltage difference for VREF+ > VDDA VREF+-VDDA | max 0.4 V | 123 | |
| Variations between different VDDX power pins of the same domain |∆VDDx| | max 50 mV | 123 | |
| Variations between all the different ground pins |VSSx-VSS| | max 50 mV | 123 | |
| Total current into sum of all VDD power lines (source)(1) ∑IVDD | max 350 mA | 124 | |
| Total current out of sum of all VSS ground lines (sink)(1) ∑IVSS | max 350 mA | 124 | |
| Maximum current into each VDD power pin (source)(1) IVDD | max 100 mA | 124 | |
| Maximum current out of each VSS ground pin (sink)(1) IVSS | max 100 mA | 124 | |
| Output current sunk/sourced by any I/O and control pin IIO(PIN) | max 20 mA | 124 | |
| Total output current sunk by sum of all I/Os and control pins ∑IIO(PIN) | max 140 mA | 124 | |
| Total output current sourced by sum of all I/Os and control pins ∑IIO(PIN) | max 140 mA | 124 | |
| Storage temperature range TSTG | min -65 · max 150 °C | 124 | |
| Maximum junction temperature TJ | Limited to 105 °C in VOS0 | max 130 °C | 124 |
| Standard operating voltage VDD | HSLV = 0 | min 1.71 · max 3.6 V | 124 |
| Standard operating voltage VDD | HSLV = 1 | max 2.7 V | 124 |
| PB8, PB9, PD6, PD7, PG[9:14] I/Os supply voltage VDDIO2 | At least one listed I/O used; HSLV = 0 | min 1.08 · max 3.6 V | 125 |
| PB8, PB9, PD6, PD7, PG[9:14] I/Os supply voltage VDDIO2 | At least one listed I/O used; HSLV = 1 | min 1.08 · max 2.7 V | 125 |
| PB8, PB9, PD6, PD7, PG[9:14] I/Os supply voltage VDDIO2 | PB8, PB9, PD6, PD7, PG[9:14] are not used | min 0 · max 3.6 V | 125 |
| USB supply voltage VDDUSB | USB is used | min 3 · max 3.6 V | 125 |
| USB supply voltage VDDUSB | USB is not used | min 0 · max 3.6 V | 125 |
| Analog supply voltage VDDA | ADC is used; shared maximum 3.6 V | min 1.62 V | 125 |
| Analog supply voltage VDDA | DAC is used; shared maximum 3.6 V | min 1.8 V | 125 |
| Analog supply voltage VDDA | VREFBUF is used; shared maximum 3.6 V | min 2.1 V | 125 |
| Analog supply voltage VDDA | ADC, DAC, and VREFBUF are not used; shared maximum 3.6 V | min 0 V | 125 |
| Analog supply voltage VDDA | Shared maximum for VDDA conditions | max 3.6 V | 125 |
| Backup domain supply voltage VBAT | min 1.2 · max 3.6 V | 125 | |
| I/O input voltage VIN | All I/Os except FT_c and TT_xx; maximum min (min(VDD, VDDA, VDDUSB, VDDIO2) + 3.6V, 5.5 V) | min -0.3 V | 125 |
| I/O input voltage VIN | Input voltage on FT_t in VBAT mode; maximum min (min(VBAT, VDDA, VDDUSB, VDDIO2) + 3.6 V, 5.5 V) | min -0.3 V | 125 |
| I/O input voltage VIN | FT_c I/O | min -0.3 · max 5 V | 125 |
| I/O input voltage VIN | TT_xx I/O; maximum VDDIOx + 0.3 | min -0.3 V | 125 |
| Internal regulator ON VCORE | VOS0; maximum AHB and APB frequency 250 MHz | min 1.3 · typ 1.35 · max 1.4 V | 126 |
| Internal regulator ON VCORE | VOS1; maximum AHB and APB frequency 200 MHz | min 1.15 · typ 1.2 · max 1.26 V | 126 |
| Internal regulator ON VCORE | VOS2; maximum AHB and APB frequency 150 MHz | min 1.05 · typ 1.1 · max 1.15 V | 126 |
| Internal regulator ON VCORE | VOS3; maximum AHB and APB frequency 100 MHz | min 0.95 · typ 1 · max 1.05 V | 126 |
| Regulator OFF: external VCORE voltage must be supplied from external regulator on VCAP pins VCORE | VOS0 | min 1.32 · typ 1.35 · max 1.4 V | 126 |
| Regulator OFF: external VCORE voltage must be supplied from external regulator on VCAP pins VCORE | VOS1 | min 1.17 · typ 1.2 · max 1.26 V | 126 |
| Regulator OFF: external VCORE voltage must be supplied from external regulator on VCAP pins VCORE | VOS2 | min 1.07 · typ 1.1 · max 1.15 V | 126 |
| Regulator OFF: external VCORE voltage must be supplied from external regulator on VCAP pins VCORE | VOS3 | min 0.97 · typ 1 · max 1.05 V | 126 |
| Stop mode VCORE | SVOS3 | typ 1 V | 126 |
| Stop mode VCORE | SVOS4 | typ 0.9 V | 126 |
| Stop mode VCORE | SVOS5 | typ 0.74 V | 126 |
| AHB clock frequency fHCLK | VOS0 | max 250 MHz | 126 |
| AHB clock frequency fHCLK | VOS1 | max 200 MHz | 126 |
| AHB clock frequency fHCLK | VOS2 | max 150 MHz | 126 |
| AHB clock frequency fHCLK | VOS3 | max 100 MHz | 126 |
| APB1, APB2, APB3 clock frequency fPCLKx (x=1,2,3) | VOS0 | max 250 MHz | 126 |
| APB1, APB2, APB3 clock frequency fPCLKx (x=1,2,3) | VOS1 | max 200 MHz | 126 |
| APB1, APB2, APB3 clock frequency fPCLKx (x=1,2,3) | VOS2 | max 150 MHz | 126 |
| APB1, APB2, APB3 clock frequency fPCLKx (x=1,2,3) | VOS3 | max 100 MHz | 126 |
| Ambient temperature for the suffix 6 version TA | Maximum power dissipation | min -40 · max 85 °C | 127 |
| Ambient temperature for the suffix 6 version TA | In LDO bypass mode | min -40 · max 125 °C | 127 |
| Junction temperature range TJ | VOS0 | min -40 · max 105 °C | 127 |
| Junction temperature range TJ | VOS1, VOS2, and VOS3 | min -40 · max 130 °C | 127 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS0; 250 MHz; max TJ = 25 °C | typ 32.1 · max 37 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS0; 250 MHz; TJ = 85 °C | max 65 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS0; 250 MHz; TJ = 105 °C | max 87 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS0; 215 MHz; max TJ = 25 °C | typ 27.9 · max 32 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS0; 215 MHz; TJ = 85 °C | max 60 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS0; 215 MHz; TJ = 105 °C | max 82 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS0; 200 MHz; max TJ = 25 °C | typ 25.7 · max 30 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS0; 200 MHz; TJ = 85 °C | max 59 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS0; 200 MHz; TJ = 105 °C | max 81 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS1; 200 MHz; max TJ = 25 °C | typ 22.1 · max 25 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS1; 200 MHz; TJ = 85 °C | max 45 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS1; 200 MHz; TJ = 105 °C | max 62 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS1; 200 MHz; TJ = 130 °C | max 93 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS1; 180 MHz; max TJ = 25 °C | typ 20.3 · max 23 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS1; 180 MHz; TJ = 85 °C | max 43 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS1; 180 MHz; TJ = 105 °C | max 59 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS1; 180 MHz; TJ = 130 °C | max 90 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS1; 168 MHz; max TJ = 25 °C | typ 18.8 · max 21 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS1; 168 MHz; TJ = 85 °C | max 42 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS1; 168 MHz; TJ = 105 °C | max 58 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS1; 168 MHz; TJ = 130 °C | max 89 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS1; 150 MHz; max TJ = 25 °C | typ 16.9 · max 20 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS1; 150 MHz; TJ = 85 °C | max 40 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS1; 150 MHz; TJ = 105 °C | max 56 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS1; 150 MHz; TJ = 130 °C | max 88 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS2; 150 MHz; max TJ = 25 °C | typ 15.4 · max 17 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS2; 150 MHz; TJ = 85 °C | max 33 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS2; 150 MHz; TJ = 105 °C | max 47 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS2; 150 MHz; TJ = 130 °C | max 73 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS2; 100 MHz; max TJ = 25 °C | typ 10.8 · max 13 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS2; 100 MHz; TJ = 85 °C | max 28 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS2; 100 MHz; TJ = 105 °C | max 41 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS2; 100 MHz; TJ = 130 °C | max 68 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS3; 100 MHz; max TJ = 25 °C | typ 9.8 · max 11 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS3; 100 MHz; TJ = 85 °C | max 23 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS3; 100 MHz; TJ = 105 °C | max 34 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS3; 100 MHz; TJ = 130 °C | max 55 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS3; 60 MHz; max TJ = 25 °C | typ 6.4 · max 8 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS3; 60 MHz; TJ = 85 °C | max 20 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS3; 60 MHz; TJ = 105 °C | max 30 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS3; 60 MHz; TJ = 130 °C | max 52 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS3; 25 MHz; max TJ = 25 °C | typ 3.2 · max 5 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS3; 25 MHz; TJ = 85 °C | max 17 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS3; 25 MHz; TJ = 105 °C | max 27 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals disabled; VOS3; 25 MHz; TJ = 130 °C | max 49 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS0; 250 MHz; max TJ = 25 °C | typ 86.8 · max 90 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS0; 250 MHz; TJ = 85 °C | max 118 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS0; 250 MHz; TJ = 105 °C | max 140 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS0; 215 MHz; max TJ = 25 °C | typ 75 · max 78 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS0; 215 MHz; TJ = 85 °C | max 107 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS0; 215 MHz; TJ = 105 °C | max 128 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS0; 200 MHz; max TJ = 25 °C | typ 69.5 · max 72 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS0; 200 MHz; TJ = 85 °C | max 102 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS0; 200 MHz; TJ = 105 °C | max 123 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS1; 200 MHz; max TJ = 25 °C | typ 60.7 · max 62 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS1; 200 MHz; TJ = 85 °C | max 82 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS1; 200 MHz; TJ = 105 °C | max 99 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS1; 200 MHz; TJ = 130 °C | max 130 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS1; 180 MHz; max TJ = 25 °C | typ 55.1 · max 56 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS1; 180 MHz; TJ = 85 °C | max 76 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS1; 180 MHz; TJ = 105 °C | max 92 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS1; 180 MHz; TJ = 130 °C | max 124 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS1; 150 MHz; max TJ = 25 °C | typ 45.8 · max 47 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS1; 150 MHz; TJ = 85 °C | max 68 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS1; 150 MHz; TJ = 105 °C | max 84 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS1; 150 MHz; TJ = 130 °C | max 116 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS2; 150 MHz; max TJ = 25 °C | typ 41.9 · max 43 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS2; 150 MHz; TJ = 85 °C | max 59 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS2; 150 MHz; TJ = 105 °C | max 72 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS2; 150 MHz; TJ = 130 °C | max 98 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS2; 100 MHz; max TJ = 25 °C | typ 28.5 · max 30 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS2; 100 MHz; TJ = 85 °C | max 45 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS2; 100 MHz; TJ = 105 °C | max 58 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS2; 100 MHz; TJ = 130 °C | max 85 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS3; 100 MHz; max TJ = 25 °C | typ 25.9 · max 27 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS3; 100 MHz; TJ = 85 °C | max 39 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS3; 100 MHz; TJ = 105 °C | max 49 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS3; 100 MHz; TJ = 130 °C | max 71 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS3; 60 MHz; max TJ = 25 °C | typ 16.2 · max 17 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS3; 60 MHz; TJ = 85 °C | max 29 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS3; 60 MHz; TJ = 105 °C | max 40 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS3; 60 MHz; TJ = 130 °C | max 61 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS3; 25 MHz; max TJ = 25 °C | typ 7.5 · max 9 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS3; 25 MHz; TJ = 85 °C | max 21 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS3; 25 MHz; TJ = 105 °C | max 31 mA | 135 |
| Supply current in Run mode IDD(Run) | LDO; all peripherals enabled; VOS3; 25 MHz; TJ = 130 °C | max 53 mA | 135 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs ON; SVOS3; max TJ = 25 °C | typ 0.37 · max 2 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs ON; SVOS3; TJ = 85 °C | max 13.98 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs ON; SVOS3; TJ = 105 °C | max 24 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs ON; SVOS3; TJ = 130 °C | max 44.39 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs ON; SVOS4; max TJ = 25 °C | typ 0.27 · max 1.4 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs ON; SVOS4; TJ = 85 °C | max 10.48 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs ON; SVOS4; TJ = 105 °C | max 18.37 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs ON; SVOS4; TJ = 130 °C | max 34.76 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs ON; SVOS5; max TJ = 25 °C | typ 0.19 · max 0.86 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs ON; SVOS5; TJ = 85 °C | max 7.08 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs ON; SVOS5; TJ = 105 °C | max 12.88 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs ON; SVOS5; TJ = 130 °C | max 25.31 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash normal; SRAMs ON; SVOS3; max TJ = 25 °C | typ 0.38 · max 2.02 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash normal; SRAMs ON; SVOS3; TJ = 85 °C | max 14.01 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash normal; SRAMs ON; SVOS3; TJ = 105 °C | max 24.06 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash normal; SRAMs ON; SVOS3; TJ = 130 °C | max 44.55 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash normal; SRAMs ON; SVOS4; max TJ = 25 °C | typ 0.29 · max 1.42 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash normal; SRAMs ON; SVOS4; TJ = 85 °C | max 10.52 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash normal; SRAMs ON; SVOS4; TJ = 105 °C | max 18.46 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash normal; SRAMs ON; SVOS4; TJ = 130 °C | max 34.88 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs OFF except SRAM2 16 Kbytes ON; SVOS3; max TJ = 25 °C | typ 0.34 · max 1.93 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs OFF except SRAM2 16 Kbytes ON; SVOS3; TJ = 85 °C | max 13.28 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs OFF except SRAM2 16 Kbytes ON; SVOS3; TJ = 105 °C | max 22.75 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs OFF except SRAM2 16 Kbytes ON; SVOS3; TJ = 130 °C | max 41.99 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs OFF except SRAM2 16 Kbytes ON; SVOS4; max TJ = 25 °C | typ 0.25 · max 1.35 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs OFF except SRAM2 16 Kbytes ON; SVOS4; TJ = 85 °C | max 9.87 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs OFF except SRAM2 16 Kbytes ON; SVOS4; TJ = 105 °C | max 17.33 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs OFF except SRAM2 16 Kbytes ON; SVOS4; TJ = 130 °C | max 32.65 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs OFF except SRAM2 16 Kbytes ON; SVOS5; max TJ = 25 °C | typ 0.17 · max 0.81 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs OFF except SRAM2 16 Kbytes ON; SVOS5; TJ = 85 °C | max 6.46 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs OFF except SRAM2 16 Kbytes ON; SVOS5; TJ = 105 °C | max 11.68 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs OFF except SRAM2 16 Kbytes ON; SVOS5; TJ = 130 °C | max 22.86 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs OFF except SRAM2 ON; SVOS3; max TJ = 25 °C | typ 0.35 · max 1.95 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs OFF except SRAM2 ON; SVOS3; TJ = 85 °C | max 13.45 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs OFF except SRAM2 ON; SVOS3; TJ = 105 °C | max 23.02 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs OFF except SRAM2 ON; SVOS3; TJ = 130 °C | max 42.52 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs OFF except SRAM2 ON; SVOS4; max TJ = 25 °C | typ 0.26 · max 1.36 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs OFF except SRAM2 ON; SVOS4; TJ = 85 °C | max 10.01 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs OFF except SRAM2 ON; SVOS4; TJ = 105 °C | max 17.52 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs OFF except SRAM2 ON; SVOS4; TJ = 130 °C | max 33.1 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs OFF except SRAM2 ON; SVOS5; max TJ = 25 °C | typ 0.17 · max 0.82 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs OFF except SRAM2 ON; SVOS5; TJ = 85 °C | max 6.59 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs OFF except SRAM2 ON; SVOS5; TJ = 105 °C | max 11.92 mA | 140 |
| Supply current in Stop IDD(stop) | LDO; flash low power; SRAMs OFF except SRAM2 ON; SVOS5; TJ = 130 °C | max 23.37 mA | 140 |
| Supply current in standby mode, IWDG OFF IDD(standby) | Backup RAM OFF; RTC and LSE OFF; 1.8 V | typ 2.58 uA | 140 |
| Supply current in standby mode, IWDG OFF IDD(standby) | Backup RAM OFF; RTC and LSE OFF; 2.4 V | typ 2.78 uA | 140 |
| Supply current in standby mode, IWDG OFF IDD(standby) | Backup RAM OFF; RTC and LSE OFF; 3 V | typ 3.01 uA | 140 |
| Supply current in standby mode, IWDG OFF IDD(standby) | Backup RAM OFF; RTC and LSE OFF; 3.3 V | typ 3.19 uA | 140 |
| Supply current in standby mode, IWDG OFF IDD(standby) | Backup RAM OFF; RTC and LSE OFF; TJ = 25 °C | max 4.3 uA | 140 |
| Supply current in standby mode, IWDG OFF IDD(standby) | Backup RAM OFF; RTC and LSE OFF; TJ = 85 °C | max 8.8 uA | 140 |
| Supply current in standby mode, IWDG OFF IDD(standby) | Backup RAM OFF; RTC and LSE OFF; TJ = 105 °C | max 16.5 uA | 140 |
| Supply current in standby mode, IWDG OFF IDD(standby) | Backup RAM OFF; RTC and LSE OFF; TJ = 130 °C | max 42.6 uA | 140 |
| Supply current in standby mode, IWDG OFF IDD(standby) | Backup RAM ON; RTC and LSE OFF; 1.8 V | typ 3.79 uA | 140 |
| Supply current in standby mode, IWDG OFF IDD(standby) | Backup RAM ON; RTC and LSE OFF; 2.4 V | typ 4.05 uA | 140 |
| Supply current in standby mode, IWDG OFF IDD(standby) | Backup RAM ON; RTC and LSE OFF; 3 V | typ 4.38 uA | 140 |
| Supply current in standby mode, IWDG OFF IDD(standby) | Backup RAM ON; RTC and LSE OFF; 3.3 V | typ 4.63 uA | 140 |
| Supply current in standby mode, IWDG OFF IDD(standby) | Backup RAM ON; RTC and LSE OFF; TJ = 25 °C | max 6 uA | 140 |
| Supply current in standby mode, IWDG OFF IDD(standby) | Backup RAM ON; RTC and LSE OFF; TJ = 85 °C | max 17 uA | 140 |
| Supply current in standby mode, IWDG OFF IDD(standby) | Backup RAM ON; RTC and LSE OFF; TJ = 105 °C | max 30 uA | 140 |
| Supply current in standby mode, IWDG OFF IDD(standby) | Backup RAM ON; RTC and LSE OFF; TJ = 130 °C | max 75 uA | 140 |
| Supply current in standby mode, IWDG OFF IDD(standby) | Backup RAM OFF; RTC and LSE ON; 1.8 V | typ 2.91 uA | 140 |
| Supply current in standby mode, IWDG OFF IDD(standby) | Backup RAM OFF; RTC and LSE ON; 2.4 V | typ 3.15 uA | 140 |
| Supply current in standby mode, IWDG OFF IDD(standby) | Backup RAM OFF; RTC and LSE ON; 3 V | typ 3.47 uA | 140 |
| Supply current in standby mode, IWDG OFF IDD(standby) | Backup RAM OFF; RTC and LSE ON; 3.3 V | typ 3.67 uA | 140 |
| Supply current in standby mode, IWDG OFF IDD(standby) | Backup RAM ON; RTC and LSE ON; 1.8 V | typ 4.16 uA | 140 |
| Supply current in standby mode, IWDG OFF IDD(standby) | Backup RAM ON; RTC and LSE ON; 2.4 V | typ 4.46 uA | 140 |
| Supply current in standby mode, IWDG OFF IDD(standby) | Backup RAM ON; RTC and LSE ON; 3 V | typ 4.85 uA | 140 |
| Supply current in standby mode, IWDG OFF IDD(standby) | Backup RAM ON; RTC and LSE ON; 3.3 V | typ 5.12 uA | 140 |
| Electrostatic discharge voltage (human body model) VESD(HBM) | Packages without SMPS; TA = 25 °C; ANSI/ESDA/JEDEC JS-001; class 2 | max 2000 V | 158 |
| Electrostatic discharge voltage (charge device model) VESD(CDM) | All packages; TA = +25 °C; ANSI/ESDA/JEDEC JS-002; class C2a | max 500 V | 158 |
| Thermal resistance junction-ambient ΘJA | LQFP64 (10 x 10 mm) | typ 48.1 °C/W | 262 |
| Thermal resistance junction-board ΘJB | LQFP64 (10 x 10 mm) | typ 24.1 °C/W | 262 |
| Stabilization time (to reach ± 3% of fCSI) tstab(CSI) | max 4 cycle | 153 | |
| Power consumption IDD(CSI) | typ 23 · max 30 uA | 153 | |
| Frequency fLSI | VDD = 3.3 V, TJ = 25 °C | min 31.4 · typ 32 · max 32.6 kHz | 153 |
| Frequency fLSI | TJ = -40 to 110 °C, VDD =1.71 to 3.6 V | min 29.76 · max 33.6 kHz | 153 |
| Frequency fLSI | TJ = -40 to 130 °C, VDD =1.71 to 3.6 V | min 29.4 · max 33.6 kHz | 153 |
| Start-up time tsu(LSI) | typ 80 · max 130 us | 153 | |
| Stabilization time (5% of final value) tstab(LSI) | typ 120 · max 170 us | 153 | |
| Power consumption IDD(LSI) | typ 130 · max 280 nA | 153 | |
| PLL input clock fPLL_IN | min 2 · max 16 MHz | 153 | |
| PLL input clock duty cycle fPLL_IN | min 10 · max 90 % | 153 | |
| PLL multiplier output clock P, Q, R fPLL_P_OUT | VOS0 | min 1 · max 250 MHz | 153 |
| PLL multiplier output clock P, Q, R fPLL_P_OUT | VOS1 | min 1 · max 200 MHz | 153 |
| PLL multiplier output clock P, Q, R fPLL_P_OUT | VOS3 | min 1 · max 100 MHz | 153 |
| PLL VCO output fVCO_OUT | min 128 · max 560 MHz | 153 | |
| PLL lock time tLOCK | Normal mode | typ 45 · max 100 us | 153 |
| PLL lock time tLOCK | Sigma-delta mode (fPLL_IN ≥ 8 MHz) | typ 60 · max 120 us | 153 |
| Cycle-to-cycle jitter Jitter | fVCO_OUT = 150 MHz; fPLL_OUT = 50 MHz | typ 60 ±ps | 155 |
| Cycle-to-cycle jitter Jitter | fVCO_OUT = 200 MHz; fPLL_OUT = 50 MHz | typ 40 ±ps | 155 |
| Cycle-to-cycle jitter Jitter | fVCO_OUT = 400 MHz; fPLL_OUT = 50 MHz | typ 18 ±ps | 155 |
| Cycle-to-cycle jitter Jitter | fVCO_OUT = 420 MHz; fPLL_OUT = 50 MHz | typ 15 ±ps | 155 |
| Period jitter Jitter | fVCO_OUT = 150 MHz; fPLL_OUT = 50 MHz | typ 75 ±ps | 155 |
| Period jitter Jitter | fVCO_OUT = 400 MHz; fPLL_OUT = 50 MHz | typ 25 ±ps | 155 |
| PLL power consumption on VDD IDD(PLL) | fVCO_OUT = 420 MHz; VDD | typ 275 · max 360 uA | 155 |
| PLL power consumption on VDD IDD(PLL) | fVCO_OUT = 420 MHz; VCORE | typ 450 uA | 155 |
| PLL power consumption on VDD IDD(PLL) | fVCO_OUT = 150 MHz; VDD | typ 160 · max 240 uA | 155 |
| PLL power consumption on VDD IDD(PLL) | fVCO_OUT = 150 MHz; VCORE | typ 165 uA | 155 |
| Supply current IDD | Word program; TJ = -40 to 130 °C; write of 50% of programmed bits equal to 0 | typ 2.5 · max 3.6 mA | 155 |
| Supply current IDD | Sector erase; TJ = -40 to 130 °C | typ 1.8 · max 4 mA | 155 |
| Supply current IDD | Mass erase; TJ = -40 to 130 °C | typ 2 · max 4 mA | 155 |
| Word program time tprog | 128 bits (user area) | typ 31 us | 155 |
| Word program time tprog | 16 bits (OTP area) | typ 31 us | 155 |
| Sector erase time (8 Kbytes) tERASE | typ 2 · max 10.5 ms | 155 | |
| Mass erase time tME | typ 2 · max 2.68 s | 155 | |
| Programming voltage Vprog | min 1.71 · max 3.6 V | 155 | |
| Electrostatic discharge voltage (human body model) VESD(HBM) | Packages without SMPS; TA = 25 °C conforming to ANSI/ESDA/JEDEC JS-001; class 2 | max 2000 V | 158 |
| Electrostatic discharge voltage (charge device model) VESD(CDM) | All packages; TA = +25 °C conforming to ANSI/ESDA/JEDEC JS-002; class C2a | max 500 V | 158 |
| Output low level voltage VOL | CMOS port, IIO = 8 mA; 2.7 V ≤ VDD ≤ 3.6 V | max 0.4 V | 162 |
| Output low level voltage VOL | TTL port, IIO = 8 mA; 2.7 V ≤ VDD ≤ 3.6 V | max 0.4 V | 162 |
| Output high level voltage VOH | TTL port, IIO = -8 mA; 2.7 V ≤ VDD ≤ 3.6 V | min 2.4 V | 162 |
| Output low level voltage VOL | IIO = 20 mA; 2.7 V ≤ VDD ≤ 3.6 V | max 1.3 V | 162 |
| Output low level voltage VOL | IIO = 4 mA; 1.71 V ≤ VDD ≤ 3.6 V | max 0.4 V | 162 |
| Output low level voltage for an FTf I/O pin in (FT I/O with “f” option) VOLFM+ | IIO = 20 mA; 2.3 V≤ VDD ≤3.6 V | max 0.4 V | 162 |
| Output low level voltage for an FTf I/O pin in (FT I/O with “f” option) VOLFM+ | IIO = 10 mA; 1.71 V ≤ VDD ≤ 3.6 V | max 0.4 V | 162 |
| Output low level voltage for an FTf I/O pin in (FT I/O with “f” option) VOLFM+ | IIO = 4.5 mA; 1.08 V ≤ VDD ≤ 3.6 V | max 0.4 V | 162 |
| Output low level voltage VOL | CMOS port, IIO = 2 mA; 2.7 V ≤ VDD ≤ 3.6 V | max 0.4 V | 163 |
| Output low level voltage VOL | TTL port, IIO = 2 mA; 2.7 V ≤ VDD ≤ 3.6 V | max 0.4 V | 163 |
| Output high level voltage VOH | TTL port, IIO = -2 mA; 2.7 V ≤ VDD ≤ 3.6 V | min 2.4 V | 163 |
| Output low level voltage VOL | IIO = 1 mA; 2.7 V ≤ VDD ≤ 3.6 V | max 0.4 V | 163 |
| Output low level voltage VOL | IIO = 0.1 mA; 1.71 V ≤ VDD ≤ 3.6 V | max 0.4 V | 163 |
| Output low level voltage VOL | CMOS port, IIO = 3 mA; 2.7 V ≤ VDD ≤ 3.6 V | max 0.4 V | 163 |
| Output low level voltage VOL | TTL port, IIO = 3 mA; 2.7 V ≤ VDD ≤ 3.6 V | max 0.4 V | 163 |
| Output high level voltage VOH | TTL port, IIO = -3 mA; 2.7 V ≤ VDD ≤ 3.6 V | min 2.4 V | 163 |
| Output low level voltage VOL | IIO = 1.5 mA; 1.71 V ≤ VDD ≤ 3.6 V | max 0.4 V | 163 |
| Output low level voltage VOL | CMOS port, IIO = 0.5 mA; 2.7 V ≤ VDD ≤ 3.6 V | max 0.4 V | 164 |
| Output low level voltage VOL | TTL port, IIO = 0.5 mA; 2.7 V ≤ VDD ≤ 3.6 V | max 0.4 V | 164 |
| Output high level voltage VOH | TTL port, IIO = -0.5 mA; 2.7 V ≤ VDD ≤ 3.6 V | min 2.4 V | 164 |
| Output low level voltage VOL | IIO = 0.25 mA; 1.71 V ≤ VDD ≤ 3.6 V | max 0.4 V | 164 |
| Maximum frequency Fmax | Speed 00; C = 50 pF, 1.71 V ≤ VDD ≤ 2 V | max 8 MHz | 169 |
| Maximum frequency Fmax | Speed 00; C = 40 pF, 1.71 V ≤ VDD ≤ 2 V | max 10 MHz | 169 |
| Maximum frequency Fmax | Speed 00; C = 30 pF, 1.71 V ≤ VDD ≤ 2 V | max 12 MHz | 169 |
| Maximum frequency Fmax | Speed 00; C = 20 pF, 1.71 V ≤ VDD ≤ 2 V | max 14 MHz | 169 |
| Maximum frequency Fmax | Speed 00; C = 10 pF, 1.71 V ≤ VDD ≤ 2 V | max 16 MHz | 169 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 00; C = 50 pF, 1.71 V ≤ VDD ≤ 2 V | max 17.8 ns | 169 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 00; C = 40 pF, 1.71 V ≤ VDD ≤ 2 V | max 15.8 ns | 169 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 00; C = 30 pF, 1.71 V ≤ VDD ≤ 2 V | max 14.4 ns | 169 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 00; C = 20 pF, 1.71 V ≤ VDD ≤ 2 V | max 13.1 ns | 169 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 00; C = 10 pF, 1.71 V ≤ VDD ≤ 2 V | max 11.4 ns | 169 |
| Maximum frequency Fmax | Speed 01; C = 50 pF, 1.71 V ≤ VDD ≤ 2 V | max 40 MHz | 169 |
| Maximum frequency Fmax | Speed 01; C = 40 pF, 1.71 V ≤ VDD ≤ 2 V | max 45 MHz | 169 |
| Maximum frequency Fmax | Speed 01; C = 30 pF, 1.71 V ≤ VDD ≤ 2 V | max 50 MHz | 169 |
| Maximum frequency Fmax | Speed 01; C = 20 pF, 1.71 V ≤ VDD ≤ 2 V | max 55 MHz | 169 |
| Maximum frequency Fmax | Speed 01; C = 10 pF, 1.71 V ≤ VDD ≤ 2 V | max 60 MHz | 169 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 01; C = 50 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 7.2 ns | 169 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 01; C = 40 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 6.5 ns | 169 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 01; C = 30 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 5.6 ns | 169 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 01; C = 20 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 4.8 ns | 169 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 01; C = 10 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 3.8 ns | 169 |
| Maximum frequency Fmax | Speed 10; C = 50 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 60 MHz | 169 |
| Maximum frequency Fmax | Speed 10; C = 40 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 70 MHz | 169 |
| Maximum frequency Fmax | Speed 10; C = 30 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 90 MHz | 169 |
| Maximum frequency Fmax | Speed 10; C = 20 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 110 MHz | 169 |
| Maximum frequency Fmax | Speed 10; C = 10 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 140 MHz | 169 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 10; C = 50 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 5.3 ns | 169 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 10; C = 40 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 4.6 ns | 169 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 10; C = 30 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 3.8 ns | 169 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 10; C = 20 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 3 ns | 169 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 10; C = 10 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 2.2 ns | 169 |
| Maximum frequency Fmax | Speed 11; C = 50 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 67 MHz | 170 |
| Maximum frequency Fmax | Speed 11; C = 40 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 100 MHz | 170 |
| Maximum frequency Fmax | Speed 11; C = 30 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 120 MHz | 170 |
| Maximum frequency Fmax | Speed 11; C = 20 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 155 MHz | 170 |
| Maximum frequency Fmax | Speed 11; C = 10 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 200 MHz | 170 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 11; C = 50 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 5 ns | 170 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 11; C = 40 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 4.1 ns | 170 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 11; C = 30 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 3.3 ns | 170 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 11; C = 20 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 2.5 ns | 170 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 11; C = 10 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 1.8 ns | 170 |
| Maximum frequency Fmax | Speed 00; C = 50 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V | max 1 MHz | 170 |
| Maximum frequency Fmax | Speed 00; C = 40 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V | max 1 MHz | 170 |
| Maximum frequency Fmax | Speed 00; C = 30 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V | max 1 MHz | 170 |
| Maximum frequency Fmax | Speed 00; C = 20 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V | max 1 MHz | 170 |
| Maximum frequency Fmax | Speed 00; C = 10 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V | max 1 MHz | 170 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 00; C = 50 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V | max 83 ns | 170 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 00; C = 40 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V | max 79 ns | 170 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 00; C = 30 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V | max 46 ns | 170 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 00; C = 20 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V | max 72 ns | 170 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 00; C = 10 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V | max 68 ns | 170 |
| Maximum frequency Fmax | Speed 11; C = 50 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V; compensation system enabled | max 30 MHz | 173 |
| Maximum frequency Fmax | Speed 11; C = 40 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V; compensation system enabled | max 35 MHz | 173 |
| Maximum frequency Fmax | Speed 11; C = 30 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V; compensation system enabled | max 44 MHz | 173 |
| Maximum frequency Fmax | Speed 11; C = 20 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V; compensation system enabled | max 55 MHz | 173 |
| Maximum frequency Fmax | Speed 11; C = 10 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V; compensation system enabled | max 77 MHz | 173 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 11; C = 50 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V; compensation system enabled | max 11.1 ns | 173 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 11; C = 40 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V; compensation system enabled | max 9.2 ns | 173 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 11; C = 30 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V; compensation system enabled | max 7.2 ns | 173 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 11; C = 20 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V; compensation system enabled | max 5.4 ns | 173 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 11; C = 10 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V; compensation system enabled | max 3.6 ns | 173 |
| Maximum frequency Fmax | Speed 00; C = 50 pF, 2.7 V ≤ VDDIO ≤ 3.6 V | max 2 MHz | 173 |
| Maximum frequency Fmax | Speed 00; C = 50 pF, 1.71 V ≤ VDDIO < 2.7 V | max 1 MHz | 173 |
| Output rise and fall time tr/tf | Speed 00; C = 50 pF, 2.7 V ≤ VDDIO < 3.6 V | max 166 ns | 173 |
| Output rise and fall time tr/tf | Speed 00; C = 50 pF, 1.71 V ≤ VDDIO < 2.7 V | max 330 ns | 173 |
| Maximum frequency Frmax | Speed 01; C = 30 pF, 2.7 V ≤ VDDIO < 3.6 V | max 10 MHz | 173 |
| Maximum frequency Frmax | Speed 01; C = 30 pF, 1.71 V ≤ VDDIO < 2.7 V | max 4 MHz | 173 |
| Output rise and fall time tr/tf | Speed 01; C = 30 pF, 2.7 V ≤ VDDIO < 3.6 V | max 33 ns | 173 |
| Output rise and fall time tr/tf | Speed 01; C = 30 pF, 1.71 V ≤ VDDIO < 2.7 V | max 65 ns | 173 |
| FMC_D[15-0] valid data before FMC_NOE high tsu(D-NOE) | min 11 ns | 190 | |
| FMC_D[15-0] valid data after FMC_NOE high th(NOE-D) | min 0 ns | 190 | |
| FMC_NWE low to FMC_D[15-0] valid tv(NWE-D) | min 0 ns | 190 | |
| Analog supply voltage VDDA | min 1.8 · typ 3.3 · max 3.6 V | 210 | |
| Positive reference voltage VREF+ | min 1.8 V | 210 | |
| Resistive load RL | DAC output buffer ON; connected to VSSA | min 5 kΩ | 210 |
| Resistive load RL | DAC output buffer ON; connected to VDDA | min 25 kΩ | 210 |
| Output impedance RO | DAC output buffer OFF | min 10.3 · typ 13 · max 16 kΩ | 210 |
| Output impedance sample and hold mode, output buffer ON RBON | DAC output buffer ON; VDD = 2.7 V | max 1.6 kΩ | 210 |
| Output impedance sample and hold mode, output buffer ON RBON | DAC output buffer ON; VDD = 2.0 V | max 2.6 kΩ | 210 |
| Output impedance sample and hold mode, output buffer OFF RBOFF | DAC output buffer OFF; VDD = 2.7 V | max 17.8 kΩ | 210 |
| Output impedance sample and hold mode, output buffer OFF RBOFF | DAC output buffer OFF; VDD = 2.0 V | max 18.7 kΩ | 210 |
| Capacitive load CL | DAC output buffer OFF | max 50 pF | 210 |
| Capacitive load CSH | Sample and Hold mode | typ 0.1 · max 1 uF | 210 |
| Voltage on DAC_OUT output VDAC_OUT | DAC output buffer OFF | min 0 V | 210 |
| Settling time (full scale: for a 12-bit code transition between the lowest and the highest input codes when DAC_OUT reaches the final value of ±0.5LSB, ±1LSB, ±2LSB, ±4LSB, ±8LSB) tSETTLING | Normal mode, DAC output buffer ON, CL ≤ 50 pF, RL ≥ 5 kΩ; ±0.5 LSB | typ 2.05 · max 3 us | 210 |
| Settling time (full scale: for a 12-bit code transition between the lowest and the highest input codes when DAC_OUT reaches the final value of ±0.5LSB, ±1LSB, ±2LSB, ±4LSB, ±8LSB) tSETTLING | Normal mode, DAC output buffer ON, CL ≤ 50 pF, RL ≥ 5 kΩ; ±1 LSB | typ 1.97 · max 2.87 us | 210 |
| Settling time (full scale: for a 12-bit code transition between the lowest and the highest input codes when DAC_OUT reaches the final value of ±0.5LSB, ±1LSB, ±2LSB, ±4LSB, ±8LSB) tSETTLING | Normal mode, DAC output buffer ON, CL ≤ 50 pF, RL ≥ 5 kΩ; ±2 LSB | typ 1.67 · max 2.84 us | 210 |
| Settling time (full scale: for a 12-bit code transition between the lowest and the highest input codes when DAC_OUT reaches the final value of ±0.5LSB, ±1LSB, ±2LSB, ±4LSB, ±8LSB) tSETTLING | Normal mode, DAC output buffer ON, CL ≤ 50 pF, RL ≥ 5 kΩ; ±4 LSB | typ 1.66 · max 2.78 us | 210 |
| Settling time (full scale: for a 12-bit code transition between the lowest and the highest input codes when DAC_OUT reaches the final value of ±0.5LSB, ±1LSB, ±2LSB, ±4LSB, ±8LSB) tSETTLING | Normal mode, DAC output buffer ON, CL ≤ 50 pF, RL ≥ 5 kΩ; ±8 LSB | typ 1.65 · max 2.7 us | 210 |
| Settling time (full scale: for a 12-bit code transition between the lowest and the highest input codes when DAC_OUT reaches the final value of ±0.5LSB, ±1LSB, ±2LSB, ±4LSB, ±8LSB) tSETTLING | Normal mode, DAC output buffer OFF, ±1LSB CL= 10 pF | typ 1.7 · max 2 us | 210 |
| Wake-up time from off state (setting the ENx bit in the DAC control register) until the final value of ±1LSB is reached tWAKEUP | Normal mode, DAC output buffer ON, CL ≤ 50 pF, RL = 5 kΩ | typ 5 · max 7.5 us | 210 |
| Wake-up time from off state (setting the ENx bit in the DAC control register) until the final value of ±1LSB is reached tWAKEUP | Normal mode, DAC output buffer OFF, CL ≤ 10 pF | typ 2 · max 5 us | 210 |
| DC VDDA supply rejection ratio PSRR | Normal mode, DAC output buffer ON, CL ≤ 50 pF, RL = 5 kΩ | typ -80 · max -28 dB | 210 |
Open-source boards using it
2- 4 layers85 × 56 mm

- 2 layers100 × 52 mm

Device
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
5 parts2
Parts like it
8STM32H562RGT6
LQFP-64(10x10)-40℃~+85℃ 1.71V~3.6V 1MB 250MHz 32 Bit 49 640KB ARM Cortex-M33 Built-in+External FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)AT32F435RGT7
LQFP-64(10x10)-40℃~+105℃ 1MB 288MHz 384KB、512KB 53 ARM Cortex-M4F LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSARTERYMicrocontrollers (MCU/MPU/SOC)AT32F435RMT7
LQFP-64(10x10)-40℃~+105℃ 288MHz 3.9375MB 384KB、512KB 53 ARM Cortex-M4F LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSARTERYMicrocontrollers (MCU/MPU/SOC)AT32F437RGT7
LQFP-64(10x10)-40℃~+105℃ 1MB 288MHz 384KB、512KB 53 ARM Cortex-M4F LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSARTERYMicrocontrollers (MCU/MPU/SOC)AT32F437RMT7
LQFP-64(10x10)-40℃~+105℃ 288MHz 3.9375MB 384KB、512KB 53 ARM Cortex-M4F LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSARTERYMicrocontrollers (MCU/MPU/SOC)STM32H503RBT6
LQFP-64(10x10)-40℃~+85℃ 1.71V~3.6V 128KB 250MHz 32 Bit 32KB 49 ARM Cortex-M33 Built-in+External FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32H7A3RGT6
LQFP-64(10x10)-40℃~+85℃ 1.4MB 1.62V~3.6V 12bit 1MB 280MHz 32 Bit 49 8bit、16bit ARM Cortex-M7 Built-in+External FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32H7B0RBT6
LQFP-64(10x10)-40℃~+85℃ 1.4MB 1.62V~3.6V 128KB 12bit 16bit 280MHz 32 Bit 49 ARM Cortex-M7 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
Questions
Is there a KiCad symbol and footprint for the STM32H563RIT6?
Yes. The symbol is MCU_ST_STM32H5:STM32H563RITx and the footprint Package_QFP:LQFP-64_10x10mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the STM32H563RIT6?
LQFP-64(10x10), with 64 pins. Its footprint is drawn on this page.
Where is the STM32H563RIT6 datasheet?
STMicroelectronics publishes it: the Datasheet link on this page opens it.
Where can I order the STM32H563RIT6?
JLCPCB lists it as part C20619634, with 0 in stock; the sellers' links on this page open their listings.
What can replace the STM32H563RIT6?
Parts like it in the library: the STM32H562RGT6 by STMicroelectronics, the AT32F435RGT7 by ARTERY, the AT32F435RMT7 by ARTERY and the AT32F437RGT7 by ARTERY. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the STM32H563RIT6?
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.