
Radome dish controller
ay2718/RadomeMotorController
The Radome CAN protocol is very simple. Send azimuth commands to address 0x1 and elevation commands to address 0x2. Azimuth and elevation reply back from addresses 0x101 and 0x102 respectively.
STMicroelectronicsExtended
-40℃~+125℃ 1.71V~3.6V 128KB 12bit 12bit 170MHz 32 Bit 32KB 42 ARM Cortex-M4F Built-in FLASH UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHS
The STM32G431CBU3 is a microcontroller made by STMicroelectronics in a UFQFPN-48(7x7) package with 49 pins. -40℃~+125℃ 1.71V~3.6V 128KB 12bit 12bit 170MHz 32 Bit 32KB 42 ARM Cortex-M4F Built-in FLASH UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its KiCad symbol (MCU_ST_STM32G4:STM32G431CBUx, from KiCad's library) and its footprint (Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C1341834). 1 open-source board in 1 repository on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | VBAT | Power in |
| 2 | PC13 | Input/output |
| 3 | PC14 | Input/output |
| 4 | PC15 | Input/output |
| 5 | PF0 | Input/output |
| 6 | PF1 | Input/output |
| 7 | PG10 | Input/output |
| 8 | PA0 | Input/output |
| 9 | PA1 | Input/output |
| 10 | PA2 | Input/output |
| 11 | PA3 | Input/output |
| 12 | PA4 | Input/output |
| 13 | PA5 | Input/output |
| 14 | PA6 | Input/output |
| 15 | PA7 | Input/output |
| 16 | PC4 | Input/output |
| 17 | PB0 | Input/output |
| 18 | PB1 | Input/output |
| 19 | PB2 | Input/output |
| 20 | VREF+ | Input |
| 21 | VDDA | Power in |
| 22 | PB10 | Input/output |
| 23 | VDD | Power in |
| 24 | PB11 | Input/output |
| 25 | PB12 | Input/output |
| 26 | PB13 | Input/output |
| 27 | PB14 | Input/output |
| 28 | PB15 | Input/output |
| 29 | PC6 | Input/output |
| 30 | PA8 | Input/output |
| 31 | PA9 | Input/output |
| 32 | PA10 | Input/output |
| 33 | PA11 | Input/output |
| 34 | PA12 | Input/output |
| 35 | VDD | Power in |
| 36 | PA13 | Input/output |
| 37 | PA14 | Input/output |
| 38 | PA15 | Input/output |
| 39 | PC10 | Input/output |
| 40 | PC11 | Input/output |
| 41 | PB3 | Input/output |
| 42 | PB4 | Input/output |
| 43 | PB5 | Input/output |
| 44 | PB6 | Input/output |
| 45 | PB7 | Input/output |
| 46 | PB8 | Input/output |
| 47 | PB9 | Input/output |
| 48 | VDD | Power in |
| 49 | VSS | Power in |

ay2718/RadomeMotorController
The Radome CAN protocol is very simple. Send azimuth commands to address 0x1 and elevation commands to address 0x2. Azimuth and elevation reply back from addresses 0x101 and 0x102 respectively.
Yes. The symbol is MCU_ST_STM32G4:STM32G431CBUx and the footprint Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
UFQFPN-48(7x7), with 49 pins. Its footprint is drawn on this page.
STMicroelectronics publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C1341834, with 0 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the STM32G431CBU6 by STMicroelectronics, the STM32G473CEU6 by STMicroelectronics, the STM32H523CEU6 by STMicroelectronics and the STM32G474CEU6 by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.