Skip to the content

STM32F103VCT6

STMicroelectronicsExtended

-40℃~+85℃ 12bit 12bit 256KB 2V~3.6V 32 Bit 48KB 72MHz 80 ARM Cortex-M3 Built-in FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHS

DatasheetJLCPCBLCSC
Part id
st/STM32F103VCT6
Category
Microcontrollers (MCU, MPU, SOC)
Package
LQFP-100(14x14)
Pins
100
In stock
5,892 at JLCPCB (C8313)
Used on
2 open-source boards

Overview

The STM32F103VCT6 is a microcontroller made by STMicroelectronics in a LQFP-100(14x14) package with 100 pins. -40℃~+85℃ 12bit 12bit 256KB 2V~3.6V 32 Bit 48KB 72MHz 80 ARM Cortex-M3 Built-in FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHS.

PCBKit's library has its KiCad symbol (MCU_ST_STM32F1:STM32F103VCTx, from KiCad's library) and its footprint (Package_QFP:LQFP-100_14x14mm_P0.5mm, from KiCad's library), ready for a KiCad board. 5,892 are in stock at JLCPCB (part C8313). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

PE21PE32PE43PE54PE65VBAT6PC137PC148PC159VSS10VDD11OSC_IN12OSC_OUT13NRST14PC015PC116PC217PC318VSSA19VREF-20VREF+21VDDA22PA023PA124PA225PA326VDD28PA429PA530PA631PA732PC433PC534PB035PB136PB237PE738PE839PE940PE1041PE1142PE1243PE1344PE1445PE1546PB1047PB1148VDD50PB1251PB1352PB1453PB1554PD855PD956PD1057PD1158PD1259PD1360PD1461PD1562PC663PC764PC865PC966PA867PA968PA1069PA1170PA1271PA1372VDD75PA1476PA1577PC1078PC1179PC1280PD081PD182PD283PD384PD485PD586PD687PD788PB389PB490PB591PB692PB793BOOT094PB895PB996PE097PE198VDD100
MCU_ST_STM32F1:STM32F103VCTxFrom KiCad's library

Footprint

Package_QFP:LQFP-100_14x14mm_P0.5mmFrom KiCad's library

From the datasheet

17
Supply, least
2 V · VDD, recommended operating, min · p. 44
Supply, most
3.6 V · VDD, recommended operating, max · p. 44
Supply, least
2 V · VDDA, ADC not used, recommended operating, min · p. 44
Supply, most
3.6 V · VDDA, ADC not used, recommended operating, max · p. 44
Supply, least
2.4 V · VDDA, ADC used, recommended operating, min · p. 44
Supply, most
3.6 V · VDDA, ADC used, recommended operating, max · p. 44
Supply, least
1.8 V · VBAT, recommended operating, min · p. 44
Supply, most
3.6 V · VBAT, recommended operating, max · p. 44
Supply, absolute maximum
4 V · VDD and VDDA, absolute maximum · p. 43
Works from
-40 °C · ambient, suffix 6, min · p. 135
Works up to
85 °C · ambient, suffix 6, max · p. 135
Junction, hottest
150 °C · junction temperature, absolute maximum · p. 44
Takes working
51 mA · run from Flash, 72 MHz, all peripherals enabled, 3.3 V, 25 °C, typical · p. 53
Takes at most
69 mA · run from Flash, 72 MHz, all peripherals enabled, 85 °C, max · p. 47
Takes asleep
2.1 µA · standby, watchdog and oscillators and RTC off, 3.3 V, 25 °C, typical · p. 50
A pin gives at most
25 mA · one I/O or control pin, sink, absolute maximum · p. 43
Junction to air (LQFP100)
46 K/W · junction to ambient, table value · p. 132

Open-source boards using it

2
  • 4 layers90 × 90 mmFlightComputer, the printed circuit board in 3D

    FlightComputer

    jbrown3859/EE175-SeniorDesign

    CubeSat Flight Computer and Radio - EE175 Senior Design F22

    83 parts3

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the STM32F103VCT6?

Yes. The symbol is MCU_ST_STM32F1:STM32F103VCTx and the footprint Package_QFP:LQFP-100_14x14mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the STM32F103VCT6?

LQFP-100(14x14), with 100 pins. Its footprint is drawn on this page.

Where is the STM32F103VCT6 datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the STM32F103VCT6?

JLCPCB lists it as part C8313, with 5,892 in stock; the sellers' links on this page open their listings.

What can replace the STM32F103VCT6?

Parts like it in the library: the STM32F407VGT6 by STMicroelectronics, the GD32F303VET6 by GigaDevice Semicon Beijing, the GD32F407VET6 by GigaDevice Semicon Beijing and the GD32F407VGT6 by GigaDevice Semicon Beijing. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the STM32F103VCT6?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.