4 layers84.5 × 17 mm
SmartProbe v004
alex31/smartprobe
firmware and hardware for an autonomous five holes 3D pitot tube
90 parts1
Overview
The LPS33HW is a pressure Sensor made by STMicroelectronics in a CCLGA-10(3.3x3.3) package with 11 pins. -40℃~+85℃ 1.7V~3.6V 26Kpa~1.26bar CCLGA-10(3.3x3.3) Pressure Sensors ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LPS33WTR, from EasyEDA) and its footprint (EasyEDA_Cloud:CCLGA-10_L3.3-W3.3-P0.60-TL-EP, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C2760770). 1 open-source board in 1 repository on GitHub use it.
Symbol
Footprint
Parameters
8- Absolute Accuracy
- 1hpa
- Features
- On-chip temperature compensation；Integrated ADC and digital interface；On-chip calibration and non-volatile storage；On-chip temperature output；Integrated signal amplifier
- Interface
- I2C；SPI
- Operating Temperature
- -40℃~+85℃
- Pressure range
- 26Kpa~1.26bar
- Relative Accuracy
- 0.1hpa
- Standby Current
- 1uA
- Voltage - Supply
- 1.7V~3.6V
Order codes
1- LPS33HWTRLCSC C2760770
Pinout
11| Pin | Name | Type |
|---|---|---|
| 1 | Vdd_IO | Unspecified |
| 2 | SCL/SPC | Unspecified |
| 3 | Reserved | Unspecified |
| 4 | SDA/SDI/SDO | Unspecified |
| 5 | SDO/SA0 | Unspecified |
| 6 | CS | Unspecified |
| 7 | INT_DRDY | Unspecified |
| 8 | GND | Unspecified |
| 9 | GND | Unspecified |
| 10 | VDD | Unspecified |
| 11 | GND | Unspecified |
Open-source boards using it
All 1Show this part on your page
<iframe src="https://pcbkit.io/embed/parts/st/LPS33HW" title="LPS33HW in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/st/LPS33HW.jpg" alt="LPS33HW" width="1200" height="900">[](https://pcbkit.io/parts/st/LPS33HW)Questions
Is there a KiCad symbol and footprint for the LPS33HW?
Yes. The symbol is EasyEDA_Cloud:LPS33WTR and the footprint EasyEDA_Cloud:CCLGA-10_L3.3-W3.3-P0.60-TL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LPS33HW?
CCLGA-10(3.3x3.3), with 11 pins. Its footprint is drawn on this page.
Where is the LPS33HW datasheet?
STMicroelectronics publishes it: the Datasheet link on this page opens it.
Where can I order the LPS33HW?
JLCPCB lists it as part C2760770, with 0 in stock; the sellers' links on this page open their listings.
What can replace the LPS33HW?
Parts like it in the library: the LPS33W by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the LPS33HW?
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.
