LPS33W
STMicroelectronicsExtended
-40℃~+85℃ 0.1hpa 1.5hpa 1.7V~3.6V 1uA 26Kpa~1.26bar I2C、SPI On-chip temperature compensation、Integrated ADC and digital interface、On-chip calibration and non-volatile storage、Integrated signal amplifier、On-chip temperature output Yes CCLGA-10(3.3x3.3) Pressure Sensors ROHS
- Part id
- st/LPS33W
- Category
- Pressure Sensors
- Package
- CCLGA-10(3.3x3.3)
- Pins
- 11
- In stock
- 90 at JLCPCB (C3210737)
Overview
The LPS33W is a pressure Sensor made by STMicroelectronics in a CCLGA-10(3.3x3.3) package with 11 pins. -40℃~+85℃ 0.1hpa 1.5hpa 1.7V~3.6V 1uA 26Kpa~1.26bar I2C、SPI On-chip temperature compensation、Integrated ADC and digital interface、On-chip calibration and non-volatile storage、Integrated signal amplifier、On-chip temperature output Yes CCLGA-10(3.3x3.3) Pressure Sensors ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LPS33WTR, from EasyEDA) and its footprint (EasyEDA_Cloud:CCLGA-10_L3.3-W3.3-P0.60-TL-EP, from EasyEDA), ready for a KiCad board. 90 are in stock at JLCPCB (part C3210737).
Symbol
Footprint
Pinout
11| Pin | Name | Type |
|---|---|---|
| 1 | Vdd_IO | Unspecified |
| 2 | SCL/SPC | Unspecified |
| 3 | Reserved | Unspecified |
| 4 | SDA/SDI/SDO | Unspecified |
| 5 | SDO/SA0 | Unspecified |
| 6 | CS | Unspecified |
| 7 | INT_DRDY | Unspecified |
| 8 | GND | Unspecified |
| 9 | GND | Unspecified |
| 10 | VDD | Unspecified |
| 11 | GND | Unspecified |
Parts like it
1
Questions
Is there a KiCad symbol and footprint for the LPS33W?
Yes. The symbol is EasyEDA_Cloud:LPS33WTR and the footprint EasyEDA_Cloud:CCLGA-10_L3.3-W3.3-P0.60-TL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LPS33W?
CCLGA-10(3.3x3.3), with 11 pins. Its footprint is drawn on this page.
Where is the LPS33W datasheet?
STMicroelectronics publishes it: the Datasheet link on this page opens it.
Where can I order the LPS33W?
JLCPCB lists it as part C3210737, with 90 in stock; the sellers' links on this page open their listings.
What can replace the LPS33W?
Parts like it in the library: the LPS33HW by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.