Skip to the content
123

LD1117V50

STMicroelectronicsExtended

0℃~+125℃@(Tj) 1 1.2V@(800mA) 100uV 15V 5V 5mA 75dB@(120Hz) 800mA Fixed Over Current Protection、Thermal shutdown Positive TO-220-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
st/LD1117V50
Category
Linear Voltage Regulators (LDO)
Package
TO-220-3
Pins
3
In stock
0 at JLCPCB (C221483)
Used on
11 open-source boards

Overview

The LD1117V50 is a linear Voltage Regulator made by STMicroelectronics in a TO-220-3 package with 3 pins. 0℃~+125℃@(Tj) 1 1.2V@(800mA) 100uV 15V 5V 5mA 75dB@(120Hz) 800mA Fixed Over Current Protection、Thermal shutdown Positive TO-220-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:LD1117V50, from KiCad's library) and its footprint (Package_TO_SOT_THT:TO-220-3_Vertical, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C221483). 11 open-source boards in 9 repositories on GitHub use it.

Symbol

1GND2VO3VI
Regulator_Linear:LD1117V50From KiCad's library

Footprint

123
Package_TO_SOT_THT:TO-220-3_VerticalFrom KiCad's library

Pinout

3
The pins of the LD1117V50
PinNameType
1GNDPower in
2VOPower out
3VIPower in

Open-source boards using it

11See all 11
  • 2 layers91.2 × 82.6 mmBuck converter, the printed circuit board in 3D

    Buck converter

    Niels-Clayton/self-tuning-buck-converter

    Variable frequency and PWM buck converter, controlling for both output voltage and inductor ripple current of the converter.

    54 parts2
  • 2 layers58 × 56 mmVera MRS-22, the printed circuit board in 3D

    Vera MRS-22

    AxelHenriksson/Vera-MRS-22

    37 parts
  • 2 layers81 × 156.1 mmNollbricka24, the printed circuit board in 3D

    Nollbricka24

    CASE-Association/nollbricka24

    Nollbricka 2024

    26 parts
  • 4 layers63.2 × 40.7 mmSerial pogo, the printed circuit board in 3D

    Serial pogo

    JonathanBheri/USB-to-UART-I2C-pogo-pins-

    This PCB will help with production EOL testing or electrical Functional test (FCT)

    17 parts
  • 4 layers101 × 88 mm.history, the printed circuit board in 3D

    .history

    kai-carlin/STM-Needle-Fab-Controller

    College of Marin Physics Club Needle Fabrication Unit Controller Project

    70 partsMIT
  • 2 layers80 × 90 mmM2MRover, the printed circuit board in 3D

    M2MRover

    SoftwareCornwall/Mission-to-Mars-Rover

    Design and build instructions for the Software Cornwall Mission to Mars Rovers

    61 parts
  • 4 layersMaster of muppets, the printed circuit board in 3D

    Master of muppets

    y3i12/master_of_muppets

    Eurorack USB MIDI interface for CVs

    147 parts
  • 2 layers75.2 × 40.1 mmPwm esc, the printed circuit board in 3D

    Pwm esc

    ChipCE/juice-plus-pcb

    Varios PCB design for 3D printers and drones

    29 parts2GPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LD1117V50?

Yes. The symbol is Regulator_Linear:LD1117V50 and the footprint Package_TO_SOT_THT:TO-220-3_Vertical, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LD1117V50?

TO-220-3, with 3 pins. Its footprint is drawn on this page.

Where is the LD1117V50 datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the LD1117V50?

JLCPCB lists it as part C221483, with 0 in stock; the sellers' links on this page open their listings.

What can replace the LD1117V50?

Parts like it in the library: the ADM7150ACPZ-5.0-R7 by Analog Devices, the ADP3338AKCZ-5-R7 by Analog Devices, the MC7805ACD2T by onsemi and the LM2940CS-5.0 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LD1117V50?

11 boards in 9 repositories on GitHub; the most starred are listed on this page, with their KiCad files.