Skip to the content
1234

LM2940CS-5.0

Texas InstrumentsExtended

-40℃~+125℃@(Ta) 1 1A 1V@(1A) 20mA 240uVrms 26V 5V 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Input overvoltage protection、Reverse polarity voltage protection Positive TO-263-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/LM2940CS-5.0
Category
Linear Voltage Regulators (LDO)
Package
TO-263-3
Pins
4
In stock
6 at JLCPCB (C2877349)
Used on
4 open-source boards

Overview

The LM2940CS-5.0 is a linear Voltage Regulator made by Texas Instruments in a TO-263-3 package with 4 pins. -40℃~+125℃@(Ta) 1 1A 1V@(1A) 20mA 240uVrms 26V 5V 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Input overvoltage protection、Reverse polarity voltage protection Positive TO-263-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulators:REG3+1 1IN-2GND-3OUT+4GND, from CERN's library) and its footprint (Package_TO_SOT_SMD:TO-263-3_TabPin4, from KiCad's library), ready for a KiCad board. 6 are in stock at JLCPCB (part C2877349). 4 open-source boards in 2 repositories on GitHub use it.

Symbol

1IN2GND4GND3OUT
Regulators:REG3+1 1IN-2GND-3OUT+4GNDFrom CERN's library

Footprint

1234
Package_TO_SOT_SMD:TO-263-3_TabPin4From KiCad's library

Pinout

4
The pins of the LM2940CS-5.0
PinNameType
1INInput
2GNDPower in
3OUTPower in
4GNDPower in

Open-source boards using it

4
  • 2 layers96.5 × 66 mmArduSensorDuino, the printed circuit board in 3D

    ArduSensorDuino

    Ardumower/ardumower

    Develop an open source robotic lawn mower (HW+SW reference platform)

    106 parts282
  • 2 layers96.5 × 66 mmBumperDuino, the printed circuit board in 3D

    BumperDuino

    Ardumower/ardumower

    Develop an open source robotic lawn mower (HW+SW reference platform)

    66 parts282
  • 2 layers96.5 × 66 mmBumperDuino, the printed circuit board in 3D

    BumperDuino

    Ardumower/ardumower

    Develop an open source robotic lawn mower (HW+SW reference platform)

    72 parts282
  • 2 layers96.5 × 66 mmBumperDuino, the printed circuit board in 3D

    BumperDuino

    kitspace-test-repos/kicad6-file-collection

    85 partsMIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LM2940CS-5.0?

Yes. The symbol is Regulators:REG3+1 1IN-2GND-3OUT+4GND and the footprint Package_TO_SOT_SMD:TO-263-3_TabPin4, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM2940CS-5.0?

TO-263-3, with 4 pins. Its footprint is drawn on this page.

Where is the LM2940CS-5.0 datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LM2940CS-5.0?

JLCPCB lists it as part C2877349, with 6 in stock; the sellers' links on this page open their listings.

What can replace the LM2940CS-5.0?

Parts like it in the library: the ADP3338AKCZ-5-R7 by Analog Devices, the MC7805ACD2T by onsemi, the NCP691MN50 by onsemi and the PS1117-5.0 by powersilicon. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LM2940CS-5.0?

4 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.