
SHT20
Sensirion
Digital I²C temperature / humidity sensor. Low-cost version. Input voltage: 2.1 - 3.6 V Typical accuracy: ±3 %RH and ±0.3 °C Datasheet: https://www.sensirion.com/sht20/
- Part id
- sensirion/SHT20
- Category
- Uncategorised
- Pins
- 7
- Used on
- 5 open-source boards
Overview
The SHT20 is an uncategorised made by Sensirion with 7 pins. Digital I²C temperature / humidity sensor. Low-cost version. Input voltage: 2.1 - 3.6 V Typical accuracy: ±3 %RH and ±0.3 °C Datasheet: https://www.sensirion.com/sht20/.
PCBKit's library has its footprint (LibrePCB_Sensirion:SENSIRION_SHT2x_reflow, from Librepcb), ready for a KiCad board. 5 open-source boards in 5 repositories on GitHub use it.
Symbol
The library has no symbol for this part yet.
Footprint
Open-source boards using it
5- 4 layers40 × 23 mm

- 4 layers55.4 × 63.3 mm

Lora sensor tag
VladimirBioACS/lora-sensor-tag-pcb-project
Simple LoRa humidity and temperature monitoring device, based on the ESP32-Wroom-D SoC module. Repo contains KiCAD 10 project for LoRa Sensor TAG device with external component libs.
147 parts1 - 2 layers10 × 10 mm

Sht20-breakout board
Chromico/sht20-breakout-board
A simple breakout board based on the SHT20 sensor
6 partsMIT - 4 layers29 × 31.5 mm

- 4 layers93.2 × 57 mm

Parts like it
71-100645-01
Digital I²C temperature / humidity sensor. Standard version. Input voltage: 2.1 - 3.6 V Typical accuracy: ±2 %RH and ±0.3 °C Datasheet: https://www.sensirion.com/sht21/SensirionUncategorised1-100694-01
Digital I²C temperature / humidity sensor. Standard version. Input voltage: 2.1 - 3.6 V Typical accuracy: ±2 %RH and ±0.3 °C Datasheet: https://www.sensirion.com/sht21/SensirionUncategorised1-100704-01
Digital I²C temperature / humidity sensor. Low-cost version. Input voltage: 2.1 - 3.6 V Typical accuracy: ±3 %RH and ±0.3 °C Datasheet: https://www.sensirion.com/sht20/SensirionUncategorised1-100706-01
Digital I²C temperature / humidity sensor. Low-cost version. Input voltage: 2.1 - 3.6 V Typical accuracy: ±3 %RH and ±0.3 °C Datasheet: https://www.sensirion.com/sht20/SensirionUncategorised1-100707-01
Digital I²C temperature / humidity sensor. Standard version. Input voltage: 2.1 - 3.6 V Typical accuracy: ±2 %RH and ±0.3 °C Datasheet: https://www.sensirion.com/sht21/SensirionUncategorised1-100768-01
Digital I²C temperature / humidity sensor. High-end version. Input voltage: 2.1 - 3.6 V Typical accuracy: ±1.8 %RH and ±0.2 °C Datasheet: https://www.sensirion.com/sht25/SensirionUncategorised1-100769-01
Digital I²C temperature / humidity sensor. High-end version. Input voltage: 2.1 - 3.6 V Typical accuracy: ±1.8 %RH and ±0.2 °C Datasheet: https://www.sensirion.com/sht25/SensirionUncategorised
Questions
Is there a KiCad symbol and footprint for the SHT20?
Yes. the footprint LibrePCB_Sensirion:SENSIRION_SHT2x_reflow, both drawn on this page. PCBKit places them on a board for you when you design with it.
What can replace the SHT20?
Parts like it in the library: the 1-100645-01 by Sensirion, the 1-100694-01 by Sensirion, the 1-100704-01 by Sensirion and the 1-100706-01 by Sensirion. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the SHT20?
5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.