Skip to the content

W5100

Pulse ElecExtended

-40℃~+85℃ 1.2mm 1dBi 3 40mm 40mm 50Ω 83.5MHz - Antennas ROHS

Part id
pulse-elec/W5100
Category
Antennas
Pins
4
In stock
15 at JLCPCB (C23082158)
Used on
11 open-source boards

Overview

The W5100 is an antenna made by Pulse Elec with 4 pins. -40℃~+85℃ 1.2mm 1dBi 3 40mm 40mm 50Ω 83.5MHz - Antennas ROHS.

15 are in stock at JLCPCB (part C23082158). 11 open-source boards in 9 repositories on GitHub use it.

Symbol

The library has no symbol for this part yet.

Footprint

The library has no footprint for this part yet.

Open-source boards using it

11See all 11
  • 4 layers214 × 170 mm.C68, the printed circuit board in 3D

    .C68

    ProbablyNotArtyom/Blitz

    Blitz is a 68030 based homebrew computer I designed over the course of nearly 3 years, starting in late 2017.

    185 parts51GPL-2.0
  • 2 layers50 × 50 mmMysensorsGW, the printed circuit board in 3D

    MysensorsGW

    mysensors/SensebenderGW

    Gateway for MySensors

    76 parts7
  • 4 layers70 × 143 mmIoBoard, the printed circuit board in 3D

    IoBoard

    Loic74650/ioBoard

    A relay (and more!) board with Ethernet connectivity and MQTT support

    206 parts3GPL-3.0
  • 2 layers86.9 × 51.8 mmAutomation pcb, the printed circuit board in 3D

    Automation pcb

    Galvant/automation-pcb

    automation PCB KiCAD files

    85 parts
  • 2 layers102.5 × 62 mmOxygen Monitoring, the printed circuit board in 3D

    Oxygen Monitoring

    mosyrf/Oxygen-Monitoring-System

    This was my second year project as an electrical engineering student, and it was quite difficult because it used an STM32 controller, which I was not familiar with.

    121 parts
  • 2 layers70 × 82.5 mmStroom shield, the printed circuit board in 3D

    Stroom shield

    VHLZonnebootteam/Telemetrie

    60 parts
  • 2 layers233.4 × 280 mmTic, the printed circuit board in 3D

    Tic

    alexiosc/cft

    The CFT homebrew minicomputer

    127 parts6GPL-3.0
  • 2 layers236.7 × 149.7 mmControllinoA, the printed circuit board in 3D

    ControllinoA

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    265 parts4

Parts like it

8

Questions

Where can I order the W5100?

JLCPCB lists it as part C23082158, with 15 in stock; the sellers' links on this page open their listings.

What can replace the W5100?

Parts like it in the library: the BW433MNX1304 by BAT WIRELESS, the P822601 by Kyocera AVX, the MAN868C103 by MEGSINE and the M620720 by Kyocera AVX. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the W5100?

11 boards in 9 repositories on GitHub; the most starred are listed on this page, with their KiCad files.