Skip to the content
12345

NCP718ASN330

onsemiExtended

-40℃~+125℃@(Tj) 1 24V 3.3V 300mA 36uVrms 440mV@(300mA) 4uA 60dB@(1kHz) Fixed Over Current Protection、Thermal shutdown、Enable control、Output discharge、Built-in soft-start Positive TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
onsemi/NCP718ASN330
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TSOT-23-5
Pins
5
In stock
5,632 at JLCPCB (C603785)
Used on
1 open-source board

Overview

The NCP718ASN330 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by onsemi in a TSOT-23-5 package with 5 pins. -40℃~+125℃@(Tj) 1 24V 3.3V 300mA 36uVrms 440mV@(300mA) 4uA 60dB@(1kHz) Fixed Over Current Protection、Thermal shutdown、Enable control、Output discharge、Built-in soft-start Positive TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:NCP718xSN330, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 5,632 are in stock at JLCPCB (part C603785). 1 open-source board in 1 repository on GitHub use it.

Symbol

1IN2GND3EN5OUT
Regulator_Linear:NCP718xSN330From KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

From the datasheet

10
Supply, least
2.5 V · VIN, recommended operating, min · p. 3
Supply, most
24 V · VIN, recommended operating, max · p. 3
Supply, absolute maximum
24 V · VIN, absolute maximum · p. 2
Junction, hottest
150 °C · junction temperature, absolute maximum · p. 2
Takes working
4 mA · quiescent current, IOUT = 0 mA, −40°C ≤ TJ ≤ 125°C, typical · p. 3
Takes asleep
100 µA · disable current, VEN = 0 V, VIN = 5 V, typical · p. 3
Gives
300 mA · rated output current, subject to safe operating area, max · p. 1
Current limit
300 mA · ILIM, VIN = VOUT + 1 V, subject to safe operating area, min · p. 3
Dropout
275 mV · TSOT−23−5, VOUT = 3.3 V, IOUT = 300 mA, typical · p. 3
Junction to air (TSOT−23−5)
235 K/W · junction-to-air thermal resistance · p. 2

Open-source boards using it

1
  • 2 layers81.3 × 358.6 mmSlave Board, the printed circuit board in 3D

    Slave Board

    jayalcock/Clocks

    A million times clock project

    101 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the NCP718ASN330?

Yes. The symbol is Regulator_Linear:NCP718xSN330 and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the NCP718ASN330?

TSOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the NCP718ASN330 datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the NCP718ASN330?

JLCPCB lists it as part C603785, with 5,632 in stock; the sellers' links on this page open their listings.

What can replace the NCP718ASN330?

Parts like it in the library: the ME6211C33M5G-N by MICRONE, the SPX3819M5-L-3-3/TR by MaxLinear, the RT9013-33GB by RICHTEK and the XC6219B332MR by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the NCP718ASN330?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.