2 layers81.3 × 358.6 mm
2 layers81.3 × 358.6 mm
Slave Board
jayalcock/ClocksA million times clock project
- Size
- 81.3 × 358.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 101
- Nets
- 112
- Pads
- 422
- Tracks, vias
- 1,036, 160
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 13 Sep 2020
- Updated
- 23 Oct 2026
Overview
Slave Board is an open-source printed circuit board by jayalcock, from the jayalcock/Clocks repository on GitHub. It is a 2-layer board of 81.3 × 358.6 mm with 101 parts on 112 nets, routed with 1,036 tracks and 160 vias.
It is built around the LPC11C24FBD48/30EL, BD9E302EFJ-E2 and SN74LVC8T245PW, with the NCP718ASN330, RMCF0201FT10K0 and XZCM2CRK53WA-8VF among its other parts. Its parts include 32 capacitors, 27 resistors, 15 ICs, 6 connectors and 4 diodes. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
11
LPC11C24FBD48/30EL
LQFP-48(7x7)-40℃~+85℃ 1.8V~3.6V 10bit 32 Bit 32KB 36 50MHz 8KB ARM Cortex-M0 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSNXP SemiconductorsMicrocontrollers (MCU/MPU/SOC)
BD9E302EFJ-E2
HTSOP-8-EP-40℃~+85℃@(TA) 1 1V~19.6V 290uA 3A 550kHz 7V~28V Adjustable Buck Buck Built-in Yes HTSOP-8-EP DC-DC Converters ROHSROHM SemiconductorDC-DC Converters
SN74LVC8T245PW
TSSOP-24-40℃~+85℃ 1 1.65V~5.5V 1.65V~5.5V 8 Bidirectional CMOS CMOS Tri-State TSSOP-24 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
NCP718ASN330
TSOT-23-5-40℃~+125℃@(Tj) 1 24V 3.3V 300mA 36uVrms 440mV@(300mA) 4uA 60dB@(1kHz) Fixed Over Current Protection、Thermal shutdown、Enable control、Output discharge、Built-in soft-start Positive TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSonsemiVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
RMCF0201FT10K0
0201-55℃~+155℃ 10kΩ 25V 50mW Thick Film Resistor ±1% ±200ppm/℃ 0201 Chip Resistor - Surface Mount ROHSStackpole Electronics (SEI)Chip Resistor - Surface Mount
XZCM2CRK53WA-8VF
06030603 LED Indication - Discrete ROHSSunLEDLED Indication - Discrete
12M 12PF 10PPM
HC-49S-SMD-2P-Mini-20℃~+70℃ 12MHz 12pF ±10ppm ±30ppm HC-49S-SMD-2P-Mini Crystals ROHSSSTCrystals
NR6028T4R7M
SMD,6x6mm2.7A 2.7A 4.7uH 40.3mΩ ±20% SMD,6x6mm Power Inductors ROHSTaiyo YudenPower Inductors
0603B682M500CT
0603Multilayer Ceramic Capacitors MLCC - SMD/SMTWalsin Technology
B340A
SMA(DO-214AC)-50℃~+150℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
PTS810SJS250SMTRLFS
SMD-4P,4.2x3.2mm-40℃~+85℃ 16V 2.5mm 3.2mm 4.2mm 50mA 6N J-Lead Round Button SPST Surface Mount,Vertical SMD-4P,4.2x3.2mm Tactile Switches ROHSC&KTactile Switches
Parts
101| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 10k | Resistor_SMD:R_0603_1608Metric | R6, R7, R8, R9, R10, R11, R12, R13, R23, R24, R29, R30, R31, R35, R36 |
| 11 | 100nF | Capacitor_SMD:C_0603_1608Metric | C3, C4, C5, C16, C18, C21, C22, C23, C24, C27, C28 |
| 8 | 0.01uF | Capacitor_SMD:C_0603_1608Metric | C6, C7, C8, C9, C10, C11, C12, C13 |
| 8 | DRV5033AJxDBZ | Package_TO_SOT_SMD:SOT-23 | U4, U5, U6, U7, U8, U9, U10, U11 |
| 4 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C14, C15, C17, C20 |
| 4 | VID28-05 | ClockLibrary:VID28-05 | M1, M2, M3, M4 |
| 3 | 50R | Resistor_SMD:R_0603_1608Metric | R32, R33, R34 |
| 3 | LED Low current | LED_SMD:LED_0603_1608Metric | D4, D6, D7 |
| 2 | 18pF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 1935161 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J8, J9 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C32, C33 |
| 2 | 22uF | Capacitor_SMD:C_0603_1608Metric | C30, C31 |
| 2 | 60R | Resistor_SMD:R_0603_1608Metric | R5, R17 |
| 2 | 750R | Resistor_SMD:R_0603_1608Metric | R22, R28 |
| 2 | SN74LVC8T245 | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U12, U13 |
| 2 | VID6606 | Package_SO:SOIC-28W_7.5x18.7mm_P1.27mm | U2, U3 |
| 1 | 100R | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C26 |
| 1 | 12MHz/12pF | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | 1935174 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-3-5.0-H_1x03_P5.00mm_Horizontal | J3 |
| 1 | 1k6 | Resistor_SMD:R_0603_1608Metric | R27 |
| 1 | 1nF | Capacitor_SMD:C_0603_1608Metric | C19 |
| 1 | 4.7uH | Inductors:IND_NR6028T4R7M | L1 |
| 1 | 430k | Resistor_SMD:R_0603_1608Metric | R25 |
| 1 | 61300411121 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | 6800pF | Capacitor_SMD:C_0603_1608Metric | C29 |
| 1 | 82k | Resistor_SMD:R_0603_1608Metric | R26 |
| 1 | B340 | Diode_SMD:D_SMA | D5 |
| 1 | BD9E302EFJ-E2 | Buck Converter:HTSOP-J8_ROM | U14 |
| 1 | Conn_ARM_JTAG_SWD_10 | digikey-footprints:PinHeader_2x5_P1.27mm_Drill.7mm | J7 |
| 1 | LPC11C24-LQFP48 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | NCP718xSN330 | Package_TO_SOT_SMD:SOT-23-5 | U15 |
| 1 | SW_SPST | Button_Switch_SMD:SW_SPST_PTS810 | SW1 |
| 1 | ~ | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-3-5.0-H_1x03_P5.00mm_Horizontal | J5 |
The 91 most common of 101 parts.
More from jayalcock/Clocks
4- 2 layers55.4 × 54.6 mm
- 2 layers47.2 × 115.3 mm
- 2 layers78.7 × 53.6 mm
Similar boards
- 4 layers74.5 × 70.3 mm
Nest mini v2-drop in pcb
marceldale/nest-mini-v2-voice
Open voice satellite board for the Google Nest Mini (2nd gen): local Home Assistant voice assistant with ESP32-S3 + XMOS XU316, ESPHome, Voice PE compatible. Open hardware, prototype stage.
249 parts4CERN-OHL-S-2.0 - 4 layers40.3 × 68.8 mm
- 2 layers100 × 50 mm
- 4 layers175 × 68.5 mm
- 4 layers50 × 44.5 mm
PowerMonitor
CoCEL-Team-Drone/CoCEL-Battery-Monitor
LiPo battery monitor for 4~6s multicopters
74 parts - 4 layers100 × 100 mm
Xserve Backplane
CollinSchairer/Xserve-Modernization
Making Apple's beautiful but whacky servers of old useable in 2023.
47 parts - 2 layers98 × 38 mm
Bldc control ver3
pekkaroi/bldc-drive
Cheap and simple brushless DC motor driver designed for CNC applications using STM32 microcontroller
68 parts199GPL-2.0 - 4 layers51.4 × 60.6 mm
Gb rp2040 cart
deltabeard/DBGC
A Game Boy cartridge using the Raspberry Pi RP2040 with RTC and MBC support.
67 parts57
Questions
How big is the Slave Board PCB?
It measures 81.3 × 358.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Slave Board use?
101 parts, built around the LPC11C24FBD48/30EL, BD9E302EFJ-E2, SN74LVC8T245PW and NCP718ASN330. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Slave Board KiCad files?
From the jayalcock/Clocks repository on GitHub, at the commit this page was made from: the board is hardware/slave-board/Slave Board.kicad_pcb and its schematic hardware/archive/Main Board V0/Main Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Slave Board design in my own project?
Its repository states no licence, so its author keeps all rights: ask jayalcock before reusing the design.