Skip to the content
12345678

NCP5901D

onsemiExtended

-10℃~+125℃ 11ns 16ns 2 3.5A 4.5V~13.2V Enable shutdown、Interleaved conduction protection、Dead-time control Half-Bridge MOSFET SOIC-8 Gate Drivers ROHS

Part id
onsemi/NCP5901D
Category
Gate Drivers
Package
SOIC-8
Pins
8
In stock
0 at JLCPCB (C904525)
Used on
1 open-source board

Overview

The NCP5901D is a gate Driver made by onsemi in a SOIC-8 package with 8 pins. -10℃~+125℃ 11ns 16ns 2 3.5A 4.5V~13.2V Enable shutdown、Interleaved conduction protection、Dead-time control Half-Bridge MOSFET SOIC-8 Gate Drivers ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:NCP5901BDR2G, from EasyEDA) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C904525). 1 open-source board in 1 repository on GitHub use it.

Symbol

1BST2PWM3EN4VCC5DRVL6GND7SW8DRVH
EasyEDA_Cloud:NCP5901BDR2GFrom EasyEDA

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the NCP5901D
PinNameType
1BSTUnspecified
2PWMUnspecified
3ENUnspecified
4VCCUnspecified
5DRVLUnspecified
6GNDUnspecified
7SWUnspecified
8DRVHUnspecified

Open-source boards using it

1
  • 2 layers80 × 38.1 mmMotor v3, the printed circuit board in 3D

    Motor v3

    UoM-Robotics-Society/ROV-project

    Software, mechanical design and hardware for ROV

    92 parts14

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the NCP5901D?

Yes. The symbol is EasyEDA_Cloud:NCP5901BDR2G and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the NCP5901D?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the NCP5901D datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the NCP5901D?

JLCPCB lists it as part C904525, with 0 in stock; the sellers' links on this page open their listings.

What can replace the NCP5901D?

Parts like it in the library: the EG2131 by EG, the SLM2186CA-DG by Sillumin, the UCC27524D by Texas Instruments and the IR2104STRPBF by Infineon Technologies. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the NCP5901D?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.