Skip to the content
12345

NCP1529ASN

onsemiExtended

-40℃~+85℃ 1 1.7MHz 1A 2.7V~5.5V 28uA 900mV~3.9V Adjustable Buck Built-in Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting Step-down type Yes TSOP-5 DC-DC Converters ROHS

Part id
onsemi/NCP1529ASN
Category
DC DC Converters
Package
TSOP-5
Pins
5
In stock
0 at JLCPCB (C23902)
Used on
13 open-source boards

Overview

The NCP1529ASN is a DC DC Converter made by onsemi in a TSOP-5 package with 5 pins. -40℃~+85℃ 1 1.7MHz 1A 2.7V~5.5V 28uA 900mV~3.9V Adjustable Buck Built-in Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting Step-down type Yes TSOP-5 DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (Regulator_Switching:NCP1529A, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C23902). 13 open-source boards in 10 repositories on GitHub use it.

Symbol

1EN2GND3SW4VIN5FB
Regulator_Switching:NCP1529AFrom KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

Pinout

5
The pins of the NCP1529ASN
PinNameType
1ENInput
2GNDPower in
3SWPower out
4VINPower in
5FBInput

Open-source boards using it

13See all 13
  • 6 layers60.6 × 100 mmGecko5education, the printed circuit board in 3D

    Gecko5education

    logisim-evolution/GECKO5Education

    Openhardware educational platform based on the ideas of the ulx3s and Gecko4Education

    311 parts18MIT
  • 4 layers88.8 × 70.1 mmCyusb3014-breakout, the printed circuit board in 3D

    Cyusb3014-breakout

    danielkucera/cyusb3014-breakout

    This design is a copy of QM Tech board: https://github.com/ChinaQMTECH/QMCYUSB3014USB3.0

    70 parts11
  • 2 layers61.5 × 105.3 mmTimekillerXtreme, the printed circuit board in 3D

    TimekillerXtreme

    stanislavbrtna/SDA_Wonder_HW

    Hardware part of the SDA Project.

    114 parts8
  • 2 layers40.7 × 58.3 mmBichito e luz, the printed circuit board in 3D

    Bichito e luz

    paltatech/curso_kicad

    14 parts1
  • 6 layers60.6 × 100 mmVisionAddOn, the printed circuit board in 3D

    VisionAddOn

    TobiasJaeggi/fpga-mocap

    FPGA based Motion Capture

    195 parts1GPL-3.0
  • 8 layers65.6 × 19.6 mmArmory, the printed circuit board in 3D

    Armory

    ahmad-ih/USB-Armory

    USB armory | https://inversepath.com/usbarmory Copyright (c) F-Secure Corporation

    184 parts
  • 4 layers106.9 × 56.3 mmHorizon, the printed circuit board in 3D

    Horizon

    Anthony-Maxwell1/horizon

    AI was used during the schematic stage, providing insight on component suggestions, finding some obscure docs and providing wiring/gpio usage suggestions.

    62 parts
  • 6 layers63.2 × 82.3 mmSuperSamFPGA, the printed circuit board in 3D

    SuperSamFPGA

    jimbro1000/SuperSamFPGA

    SamX8 design expanded to leverage basic FPGA instead of CPLD

    105 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the NCP1529ASN?

Yes. The symbol is Regulator_Switching:NCP1529A and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the NCP1529ASN?

TSOP-5, with 5 pins. Its footprint is drawn on this page.

Where is the NCP1529ASN datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the NCP1529ASN?

JLCPCB lists it as part C23902, with 0 in stock; the sellers' links on this page open their listings.

What can replace the NCP1529ASN?

Parts like it in the library: the MT3540-F23 by XI'AN Aerosemi Tech, the TLV62569DBV by Texas Instruments, the SY8088IAAC by 矽力杰silergy and the MT3406 by XI'AN Aerosemi Tech. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the NCP1529ASN?

13 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.